Dr. Md. Ataur Rahman
My Social Links

Dr. Md. Ataur Rahman

Professor
International Islamic University Malaysia, Malaysia

Highest Degree
Ph.D. in Machinery from Universiti Putra Malaysia, Malaysia

Share this Profile

Area of Interest:

Physical Science Engineering
100%
Electromagnetic Transmission
62%
Renewable Energy
90%
Nanotechnology
75%
Vehicle Dynamics
55%

Research Publications in Numbers

Books
2
Chapters
2
Articles
66
Abstracts
0

Selected Publications

  1. Rahman, A., M.N.A. Hawlader and A. Helmi 2017. Two-phase evaporative battery thermal management technology for EVs/HEVs. Int. J. Automot. Technol., 18: 875-882.
    Direct Link  |  
  2. Rahman, A., M. Rahman and H. Karim, 2017. The theory of the development of an electromagnetic engine for automotive use. Int. J. Adv. Robot Automn, 2: 1-8.
    Direct Link  |  
  3. Rahman, A., K.M. Aung, S. Khalid and M. Rahman, 2017. Physics of ZnO/SiO2 electrolyte semi-conductive thermal electric generator. Int. J. Adv. Applied Sci., 4: 35-43.
    CrossRef  |  Direct Link  |  
  4. Rahman, A., K.M. Aung, R. Afroz, 2017. Parametric study of pallldum/graphene catalyst on-board steam reformer for hydrogen generation from IC engine’s waste. Int. J. Eng. Technol., 17: 13-24.
  5. Rahman, A., 2017. Thermoelectric technology for IC engine waste energy harvesting:
liquid cooling approach. Int. J. Sci. Eng. Res., 7: 1-12.
    Direct Link  |  
  6. Rahman, A. and R. Afroz, 2017. Lithium battery recycling management and policy. Int. J. Energy Technol. Policy, 13: 278-291.
    CrossRef  |  
  7. Rahman, A. and K.M. Aung, 2017. Renewable Energy System for Internal Combustion Engine. IIUM Press, Kuala Lumpur, Malaysia.
  8. Rahman, A. and A. Rafia, 2017. Recycling and disposal of lithium battery: Economic and environmental approach. IUM Eng. J., 18: 238-252.
  9. Rahman, A. and A. Hassan, 2017. Green Transportation System for Eco Environment. IIUM Press, Kuala Lumpur, Malaysia.
  10. Rafia, A and A.R. Mohammed, 2017. Health impact of river water pollution in Malaysia. Int. J. Adv. Appl. Sci., 4: 78-85.
    CrossRef  |  Direct Link  |  
  11. Mohiuddin, A.K.M., M.Y. Ameer, A. Rahman and A.A. Khan, 2017. Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 184. .
    Direct Link  |  
  12. Rahman, A., M.N.A. Hawlader and I. Sany, 2017. Hybrid engine powered city car: Fuzzy controlled approach. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 184. 10.1088/1757-899X/184/1/012026.
    CrossRef  |  
  13. Rahman, A., M. Rahman and R. Mahbubur, 2017. Wireless battery management system of electric transport. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 260. 10 1088/1757-899x/260/1/012029.
    CrossRef  |  
  14. Rahman, M., M.M. Rashid, A. Rahman and S. Khan, 2016. Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN J. Eng. Applied Sci., 11: 362-367.
    Direct Link  |  
  15. Afroz, R., A. Rahman, M.M. Masud and R. Akhtar, 2016. The knowledge, awareness, attitude and motivational analysis of plastic waste and household perspective in Malaysia. Environ. Sci. Pollut. Res., 24: 2304-2315.
    CrossRef  |  PubMed  |  Direct Link  |  
  16. Rashid, M.M., M. Firdaus, M.H. Hassan and A. Rahman, 2015. ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. J. Mech. Sci. Technol., 29: 2793-2802.
    Direct Link  |  
  17. Rahman, M.A., R. Fadhilah, R. Afroz, A.K.M. Mohiuddin and N.A.H. Mohammad, 2015. Power generation from waste of IC engines. Renewable Sustainable Energy Rev., 51: 382-395.
    CrossRef  |  Direct Link  |  
  18. Rahman, A., M. Rashid, A.K.M. Mohiuddin and M.N.A. Hawlader, 2015. Nano-battery Technology for EV/HEV: A pioneering study. IIUM Eng. J., 16: 57-68.
    Direct Link  |  
  19. Rahman, A., F. Shuimi and M.N.A. Hawlader, 2015. Two phase fuzzy controlled evaporative thermal management system for EVs/HEVs. Int. J. Automot. Technol., 28: 297-304.
  20. Mohiuddin, A.K.M., A. Rahman, M.F. Chemani and M.B. Zakaria, 2015. Investigation of PEM fuel cell for automotive use. IIUM Eng. J., 16: 69-78.
    Direct Link  |  
  21. Rahman, A., S.B. Sharif, A.K.M. Mohiuddin, M. Rashid and A. Hossain, 2014. Energy efficient electromagnetic actuator for CVT system. J. Mech. Sci. Technol., 28: 1153-1160.
    Direct Link  |  
  22. Rahman, A., S. Farhan, H. Ahmed and M.N.A. Hawlader, 2014. Fuzzy controlled evaporative battery cooling system for EVs/HEVs. Int. J. Electr. Hybrid Veh. Syst., 8: 233-240.
  23. Rahman, A. and R. Afroz, 2014. Development of electric vehicle: Public perception and attitude, the Malaysian approach. World Rev. Int. Transp. Res., 5: 149-167.
  24. Hossain, A. and A. Rahman, 2014. Sensor-Controlled Intelligent Vehicle Systems: Demand and Needs for a Global Automotive Landscape. In: Comprehensive Materials Processing, Volume 13: Sensor Materials, Technologies and Applications, Hashmi, S. (Ed.). Chapter 19, Elsevier Ltd., USA., ISBN: 9780080965321, pp: 473-497.
  25. Ferdaus, M.M., M.M. Rashid, M.H. Hassan and A. Rahman, 2014. Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. J. Mech. Sci. Technol., 28: 3667-3677.
    Direct Link  |  
  26. Afroz, R., A. Rahman, M.M. Masud, R. Akhtar and J.B. Duasa, 2014. How individual values and attitude influence consumers' purchase intention of electric vehicles—some insights from Kuala Lumpur, Malaysia. Environ. Urbanization Asia, 6: 1-18.
    CrossRef  |  
  27. Sharif, S.B., A. Rahman, A.K.M. Mohiuddin and A. Hossain, 2013. Study on the development of a fuzzy logic control electromagnetic actuated CVT system. Int. J. Eng. Syst. Modell. Simul., 5: 217-225.
  28. Rahman, A., F.A. Razzak, M.N.A. Hawlader and M. Rashid, 2013. Nonlinear modeling and simulation waste energy harvesting system of IC engine-fuzzy approach. J. Renewable Sustainable Energy, 5: 1-13.
  29. Rahman, A. and A. Yahya, 2013. Performance investigation of an advanced tracked prime mover on low bearing soil. J. Terramech., 50: 233-244.
    CrossRef  |  Direct Link  |  
  30. Rahman, A., R. Afroz and A. Yahya, 2012. The Peat Swamp: Productivity, Trafficability and Mechanization. Nova Science Publication Inc., New York, USA. ISBN-13: 9781619426702, Pages: 185.
  31. Rahman, A., B.S Sazzad and A. Hossain, 2012. Kinematics and non-linear control of electro- magnetic actuated CVT system. J. Mech. Sci. Technol., 26: 2189-2196.
    Direct Link  |  
  32. Rahman, A., A. Hossain, A.H.M. Zahirulalam and R. Mahbubur, 2012. Fuzzy knowledge-based model for prediction of traction force of an electric golf car. J. Terramech., 49: 13-25.
    CrossRef  |  
  33. Mohiuudin, A.K.M. and A. Rahman, 2012. Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Adv. Mater. Res., 445: 899-904.
  34. Hossain, A., A. Rahman and A.K.M. Mohiuddin, 2012. Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. J. Terramech., 49: 73-80.
    CrossRef  |  
  35. Fadhilah, A.R. and A. Rahman, 2012. Dynamic modeling and simulation of waste energy harvesting system for urban car. J. Adv. Mater. Res., 570: 679-682.
    Direct Link  |  
  36. Altab, H. and A. Rahman, 2012. Intelligent air-cushion tracked vehicle performance investigation: neural-networks. Int. J. Heavy Veh. Syst., 19: 407-426.
  37. Rahman, A., R. Afroz and A. Hossain, 2011. Advanced Theory of Peat Vehicle Mobility: Advanced Intelligent Peat Vehicle. LAMBERT Academic Publishing, Germany, ISBN: 978-3-8465-3265-2, Pages: 296.
  38. Rahman, A., A.K.M. Mohiuddin, A. Hossain and Y. Azmi, 2011. Integrated mechanics for the development of hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. Int. J. Heavy Veh. Syst., 18: 227-244.
  39. Rahman, A., A.K.M. Mohiuddin and I.I. Sany, 2011. A study on the development of traction control system of a golf car. Int. J. Electr. Hybrid Veh., 3: 47-61.
  40. Rahman, A., A. Hossain and A.K.M. Mohiuddin, 2011. Performance measurements of a tracked vehicle system. Int. J. Automot. Technol., 12: 503-511.
    CrossRef  |  Direct Link  |  
  41. Rahman, A., 2011. Development of a model of energy efficient hybrid engine towards green technology. Int. J. Electr. Hybrid Veh., 3: 138-151.
    Direct Link  |  
  42. Mohiuddin, A.K.M., M. Rahman and Y.H. Shin, 2011. Application of multi-objective genetic algorithm (MOGA) for design optimization of valve timing at various engine speeds. Adv. Mater. Res., 265: 1719-1724.
    Direct Link  |  
  43. Mohiuddin, A.K.M. and A. Rahman, 2011. Possible solution to smoothen the torque curve of the CAMPRO engine. Int. J. Veh. Syst. Model. Test., 6: 202-218.
  44. Hossain, A., A. Rahman, J. Hossen, A.K.M.P. Iqbal and M.I. Zahirul, 2011. Prediction of aerodynamic characteristics of an aircraft model with and without winglet using fuzzy logic technique. Aerosp. Sci. Technol., 15: 595-605.
    CrossRef  |  Direct Link  |  
  45. Hossain, A., A. Rahman and A.K.M. Mohiuddin, 2011. Cushion pressure control system for an intelligent air-cushion track vehicle. J. Mech. Sci. Technol., 25: 1035-1041.
    CrossRef  |  Direct Link  |  
  46. Rahman, A., A.K.M. Mohiuddin, A.F. Ismail, A. Yahya and A. Hossain, 2010. Development of hybrid electrical air-cushion tracked vehicle for swamp peat. J. Terramechanics, 47: 45-54.
    CrossRef  |  Direct Link  |  
  47. Mohiuddin, A.K.M., A. Rahman and Y.H. Shin, 2010. Application of Multi-Objective Genetic Algorithm (Moga) for Design Optimization of Valve Timing at Various Engine Speeds. In: Materials Processing and Precision Engineering (Series 1), Adesta, E.Y.T. (Ed.). Research Management Centre-IIUM, Selangor, Malaysia, pp: 140-151.
  48. Hossain, A., A. Rahman, J. Hossen, A.K.M.P. Iqbal and S.K. Hasan, 2010. Application of fuzzy logic approach for an aircraft model with and without winglet. Int. J. Mech. Ind. Aerosp. Eng., 4: 78-86.
    Direct Link  |  
  49. Hossain, A., A. Rahman, J. Hossen, A.K.M.P. Iqbal and S.K. Hasan, 2010. Application of fuzzy logic approach for an aircraft model with and without winglet. Int. J. Aerosp. Mech. Eng., 5: 224-232.
  50. Hossain, A., A. Rahman, A.K.M. Mohiuddin and Y. Aminanda, 2010. Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. Int. J. Aerospace Mech. Eng., 4: 288-295.
    Direct Link  |  
  51. Hossain, A. and A. Rahman, 2010. Power consumption prediction for an intelligent air-cushion track vehicle: Fuzzy expert system. J. Energy Power Eng., 4: 25-36.
  52. Rahman, A., A.K.M. Mohiuddin, H. Altab and Y. Azmi, 2009. Hybrid electrical air-cushion tracked vehicle for swamp peat. Open Mech. Eng. J., 3: 63-71.
    Direct Link  |  
  53. Rahman, A., A.K.M. Mohiuddin and Y. Azmi, 2009. Kinematics model for the determination of peripheral forces: Wheel vehicles on sepang peat terrain in Malaysia. Int. J. Heavy Veh. Syst., 16: 225-241.
  54. Hossain, A., A. Rahman, M. Rahman, H.K. Hasan and Z. Hossain, 2009. Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. J. Urban Environ. Eng., 3: 43-51.
    Direct Link  |  
  55. Rahman, A., A.K.M. Mohiuddin and Y. Azmi, 2008. Tractive performance of LGP-30 wheeled vehicle on sepang peat terrain in Malaysia-in straight motion. Open Transp. J., 2: 105-117.
  56. Mohiuddin, A.K.M., A. Rahman, A. Arfah and M.A. Farraen, 2008. Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L engine. Int. J. Mech. Materials Eng. (IJMME), 3: 176-186.
  57. Mohiuddin, A.K.M., A. Rahman and F. Asral, 2008. Design and development of valve train system for gasoline engine using GT-suite software. Int. J. Mech. Materials Eng. (IJMME), 3: 80-89.
    Direct Link  |  
  58. Hossain, A., P.R. Arora, A. Rahman, A.A. Jaafar and A.P. Iqbal, 2008. Analysis of longitudinal aerodynamic characteristics of an aircraft model with and without winglet. Jordan J. Mech. Ind. Eng., 2: 143-150.
    Direct Link  |  
  59. Hossain, A., A.K.M.P. Iqbal, A. Rahman, M. Arifin and M. Mazian, 2008. Design and development of a 1/3 scale vertical axis wind turbine for electrical power generation. J. Urban Environ. Eng., 1: 53-60.
    Direct Link  |  
  60. Rahman, A., A.K.M. Mohiuudin and A. Hossain, 2007. Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. Int. J. Mech. Mater. Eng., 2: 189-199.
    Direct Link  |  
  61. Mohiuddin, A.K.M., R. Saidur, M.A. Sattar and A. Rahman, 2007. Comparison of drift eliminators characteristics in evaporative condenser and spray filled tower. Int. Energy J., 8: 155-161.
    Direct Link  |  
  62. Mohiuddin, A.K.M., A. Rahman and Y.B. Gazali, 2007. Simulation and experimental investigation of muffler performance. Int. J. Mech. Materials Eng. (IJMME), 2: 118-124.
    Direct Link  |  
  63. Mohiuddin, A.K.M., A. Rahman and M. Dzaidin, 2007. Optimal design of automobile exhaust system using GT-POWER. Int. J. Mech. Materials Eng. (IJMME), 2: 41-48.
    Direct Link  |  
  64. Rahman, A., Y. Azmi, M. Zohadie, D. Ahmad and W. Ishak, 2006. Tractive performance of a designed and developed segmented rubber tracked vehicle on Sepang peat terrain during straight motion: theoretical analysis and experimental substantiation. Int. J. Heavy Veh. Syst., 13: 298-323.
    CrossRef  |  
  65. Rahman, A., Y. Azmi, M. Zohadie, D. Ahmad and W. Ishak, 2006. Traction mechanics of the designed and developed segmented rubber track vehicle for Sepang peat terrain in Malaysia during turning motion: theoretical and experimental analysis. Int. J. Heavy Veh. Syst., 13: 324-350.
    Direct Link  |  
  66. Rahman, A., Yahya, A., Zohadie, M., Ahmad, D. and Ishak, W., 2005. Simulated steerability of a segmented rubber tracked vehicle during turning on sepang peat terrain in Malaysia. Int. J. Heavy Veh. Syst., 12: 139-168.
  67. Rahman, A., A. Yahya, M.Z. Bardaie, D. Ahmad and W.I.W. Ismail, 2005. Processes involved in the design of a segmented rubber tracked vehicle for peat terrain in Malaysia. Int. J. of Veh. Des., 38: 347-378.
    CrossRef  |  
  68. Rahman, A., A. Yahya, M.Z. Bardaie, D. Ahmad and W. Ismail, 2005. Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. Intl. J. Heavy Veh. Syst., 12: 239-267.
    Direct Link  |  
  69. Rahman, A., A. Yahya, M. Zohadie, W. Ishak and D. Ahmad, 2005. Design parameters optimization simulation of a segmented rubber tracked vehicle for sepang peat in Malaysia. Am. J. Applied Sci., 2: 655-671.
    Direct Link  |  
  70. Rahman, A., A. Yahaya, M. Zohadie, D. Ahmad and W. Ishak, 2005. Designing framework of a segmented rubber tracked vehicle for Sepang Peat Terrain in Malaysia. IIUM Eng. J., 6: 1-22.
    Direct Link  |  
  71. Rahman, A., Y. Azmi, M. Zohadie, D. Ahmad and W. Ishak, 2004. Mechanical properties in relation to vehicle mobility of sepang peat terrain in Malaysia. J. Terramech., 41: 25-41.
    CrossRef  |