Education
Academic Background-
Ph.D. The University of Sheffield, England, UK Mechanical Engineering | Completed: 2005
Publications (88)
Selected Scholarly Contributions
2026
Strain-based running-reliability characterisation in time-domain for risk monitoring under various load conditions
2024
Fatigue life assessment of vehicle coil spring using finite element analysis under random strain loads in time domain
2022
Evaluating charpy impact signals with different frequencies using power spectrum densities.
Shahrum Abdullah
2011
Nanoindentation test for the stiffness distribution analysis of bonded Au ball bonds.
Shahrum Abdullah
2011
Nanoindentation test for the strength distribution analysis of bonded Au ball bonds.
Shahrum Abdullah
2011
Nanoindentation approach for evaluation of process parameters effect on the strength of bonded Au ball bonds.
Shahrum Abdullah
2011
Comparative study on data editing techniques for fatigue time series signals.
Shahrum Abdullah
2011
Hardness test on an epoxy mold compound of a quad flat no lead package using the depth sensing nanoindentation.
Shahrum Abdullah
2011
Micromechanical studies of 4N gold wire for fine pitch wirebonding.
Shahrum Abdullah
2010
Three-point bending test behaviour of a QFN semiconductor package.
Shahrum Abdullah
2010
Characterization of 0.5μm BiCMOS gate oxide using time dependent dielectric breakdown test.
Shahrum Abdullah
2010
An optimization of two-steps curing profile to eliminate voids formation in underfill epoxy for Hi-CTE flip chip packaging.
Shahrum Abdullah
2010
Failure analysis of a semiconductor packaging leadframe using the signal processing approach.
Shahrum Abdullah
2010
Extracting fatigue damage features using STFT and CWT.
Shahrum Abdullah
2010
Using the hybrid kurtosis-based method to correlate strain and vibration signals.
Shahrum Abdullah
2010
The morlet wavelet analysis for fatigue feature clustering.
Shahrum Abdullah
2010
Time complexity estimation and optimisation of the genetic algorithm clustering method.
Shahrum Abdullah
2010
Preliminary study of Condition-Based Monitoring (CBM) on automotive gearbox using ultrasonic signals.
Shahrum Abdullah
2010
Running damage extraction technique for identifying fatigue damaging events.
Shahrum Abdullah
2010
Mechanical properties of QFN semiconductor package using flexural test.
Shahrum Abdullah
2010
Effects of calcium supplements on fracture healing in a rat osteoporotic model.
Shahrum Abdullah
2010
Behavioural investigation of fatigue time series using the statistical approach.
Shahrum Abdullah
2010
Wavelet coefficient extraction algorithm for extracting fatigue features in variable amplitude fatigue loading.
Shahrum Abdullah
2010
Production of feedstock material for semi-solid materialprocessing by cooling slope casting process.
Shahrum Abdullah
2009
Investigation of microstructures and properties of440c martensitic stainless steel.
Shahrum Abdullah
2009
Role of strain rate on the micromechanical characterization properties of 4N gold micro wire: Micro tensile and NanoIndentation.
Shahrum Abdullah
2009
Modelling of fiber metal laminate (Fml) composite using the residual stiffness and strength model.
Shahrum Abdullah
2009
Effect of leadframe oxidation on the reliability of a quad flat no-lead package.
Shahrum Abdullah
2009
Fatigue life assessment of different steel-based shell materials under variable amplitude loadings.
Shahrum Abdullah
2009
A novel machining signal filtering technique: Z-notch filter.
Shahrum Abdullah
2009
Peak-valley segmentation algorithm for kurtosis analysis and classification of fatigue time series data.
Shahrum Abdullah
2009
Fatigue life evaluation of two types of steel leaf springs.
Shahrum Abdullah
2009
Fatigue crack growth modelling of aluminium alloy under constant and variable amplitude loadings.
Shahrum Abdullah
2009
A modeling of fatigue crack growth under constant and variable amplitude loading for aluminum alloy.
Shahrum Abdullah
2009
Review of fatigue crack propagation models for metallic components.
Shahrum Abdullah
2009
Towards standardising the fatigue crack simulation studies on metallic materials.
Shahrum Abdullah
2009
FEA based durability using strain-life models for different medium carbon steel as fabrication mater.
Shahrum Abdullah
2009
Durability assessment of cylinder block for two stroke free piston linear engine using random loading.
Shahrum Abdullah
2009
Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach.
Shahrum Abdullah
2009
Thermal-mechanical analysis of a different leadframe thickness of semiconductor package under the reflow process.
Shahrum Abdullah
2009
A study of fatigue data editing using the Short-Time Fourier Transform (STFT).
Shahrum Abdullah
2009
Effect of manufacturing stresses to die attach film performance in quad flatpack no-lead stacked die packages.
Shahrum Abdullah
2009
Signal processing method for evaluating fatigue damage in a piping system.
Shahrum Abdullah
2009
Route to becoming a member of evaluation panel for the Engineering Accreditation Council (EAC) of Malaysia.
Shahrum Abdullah
2008
Dicing laminated wafer for QFN 3D stacked die packaging.
Shahrum Abdullah
2008
An evaluation of test statistics for detecting level change in BL(1,1,1,1) models.
Shahrum Abdullah
2008
Probabilistic analysis of cracked structures with uncertainty parameters.
Shahrum Abdullah
2008
Statistical analysis of a nanostationary fatigue data using the ARIMA approach.
Shahrum Abdullah
2008
Modeling lane-changing behavior based on queue length at an urban signalized intersection.
Shahrum Abdullah
2008
Subsurface deformation of worn al-cu and al-mg alloys.
Shahrum Abdullah
2008
Effects of looping formation on wire sweeping problem of a newly developed QFN package.
Shahrum Abdullah
2008
Gold wire neck strength on different combinations of looping parameters.
Shahrum Abdullah
2008
Comparison in between good and oxidized leadframe: A case study in package delamination analysis.
Shahrum Abdullah
2008
Step cut for dicing laminated wafer in a QFN package.
Shahrum Abdullah
2008
Copper leadframe analysis using thermomechanical approach.
Shahrum Abdullah
2008
Effect of package delamination under 3-points bending test: A case study using cyclic loading.
Shahrum Abdullah
2008
Low looping challenges in the QFN wire bonding process.
Shahrum Abdullah
2008
Abrupt changes detection in fatigue data using the cumulative sum method.
Shahrum Abdullah
2008
Peak-valley segmentation algorithm for fatigue time series data.
Shahrum Abdullah
2008
Fatigue analysis of Spot-welded joint for automotive structures.
Shahrum Abdullah
2008
A study on ultrasonic signals processing generated from automobile engine block using statistical analysis.
Shahrum Abdullah
2008
Finite element based fatigue life prediction of a new free piston engine mounting.
Shahrum Abdullah
2008
Designing for comfort and reliability in an intelligent car seat.
Shahrum Abdullah
2008
Fatigue road signal denoising process using the 4th order of daubechies wavelet transforms.
Shahrum Abdullah
2008
A review on finite element analysis approaches in durability assessment of automotive components.
Shahrum Abdullah
2008
The effect of leadframe oxidation of a quad flat no-lead semiconductor package under cyclic loading.
Shahrum Abdullah
2008
Fatigue life assessment for metallic structure: A case study of shell structure under variable amplitude loading.
Shahrum Abdullah
2008
Analysis of a variable amplitude fatigue loading based on the quality statistical approach.
Shahrum Abdullah
2008
Development of integrated kurtosis-based algorithm for z-filter technique.
Shahrum Abdullah
2008
Finite element based vibration fatigue analysis of a new Two-stroke linear generator engine component.
Shahrum Abdullah
2007
Application of a computational data editing algorithm to summarise fatigue road loadings.
Shahrum Abdullah
2007
Integration of I-kaz coefficient and taylor tool life curve for tool wear progression monitoring in machining process.
Shahrum Abdullah
2007
A longitudinal study of first year engineering students' performance at the Universiti Kebangsaan Malaysia: Before and after the implementation of the OBE approach.
Shahrum Abdullah
2007
Recognising fatigue damaging features in variable amplitude loadings using the s-transform approach.
Shahrum Abdullah
2007
Application of moving average approaches in analysing fatigue road loading.
Shahrum Abdullah
2007
The wavelet transform for fatigue history editing: Is it applicable for automotive applications.
Shahrum Abdullah
2007
Enhancement of capabilities in design synthesis through the concurrent application of design methodologies.
Shahrum Abdullah
2007
Finite element based durability assessment of a free piston linear engine component.
Shahrum Abdullah
2007
Using a fatigue data editing approach for analysing cycle sequence effects in variable amplitude road loadings.
Shahrum Abdullah
2006
A study of employers' satisfaction of engineering graduates in Malaysia.
Shahrum Abdullah
2006
Performances test statistics for single outlier detection in bilinear (1,1,1,1) models.
Shahrum Abdullah
2006
Using the orthogonal wavelet transform to identify fatigue features in variable amplitude fatigue loadings.
Shahrum Abdullah
2006
Bump extraction algorithm for variable amplitude fatigue loading.
Shahrum Abdullah
2006
Fatigue data editing algorithm for automotive applications.
Shahrum Abdullah
2005
A mission synthesis algorithm for fatigue damage analysis.
Shahrum Abdullah
2004
Pengembangan reka bentuk konsep menerusi kaedah penganalisaan fungsi (development of the conceptual design using function analysis approach).
Shahrum Abdullah
2001
Design methodology development of a Tailor-made aortic stent.
Shahrum Abdullah
2000