Dr. Mahmood Mehrdad Shokrieh
My Social Links

Dr. Mahmood Mehrdad Shokrieh

Professor
University of Science and Technology, Iran

Highest Degree
Ph.D. in Mechanics Engineering from McGill University, Canada

Share this Profile

Area of Interest:

Physical Science Engineering
100%
Civil Engineering
62%
Mechanical Engineering
90%
Composite Materials
75%
Material Engineering
55%

Research Publications in Numbers

Books
2
Chapters
10
Articles
319
Abstracts
37

Selected Publications

  1. Torabizadeh, M.A., M.M. Shokrieh and A. Fereidoon, 2011. Comparison of mechanical properties of unidirectional composite predicted from analytical models and experimental evaluation at different temperatures. Proceedings of the 19th Annual Conference on Mechanical Engineering-ISME2011, May 10-12, 2011, The University of Birjand, Birjand, Iran. -.
  2. Shokrieh, M.M., V. Nasir and H. Karimipour, 2011. Strength behavior and crack formation mechanisms of e-glass fiber exposed to sulfuric acid environment. J. Compos. Mater. 10.1177/0021998311410481.
    CrossRef  |  
  3. Shokrieh, M.M., V. Nasir and H. Karimipour, 2011. A micromechanical study of longitudinal strength of unidirectional E-glass/epoxy composites exposed to sulfuric acid environment. J. Mater. Des. .
    Direct Link  |  
  4. Shokrieh, M.M., S.H.R. Rajabpour and R.M. Heidari, 2011. Experimental determination of mode-I interlaminar fracture toughness of laminated composites made of unidirectional plies. Proceedings of the 19th Annual Conference on Mechanical Engineering-ISME2011, May 10-12, 2011, The University of Birjand, Birjand, In Persian, Iran. -.
  5. Shokrieh, M.M., M.H. Rarani, M. Shakouri and Kashizadeh, 2011. Ffects of thermal cycles on mechanical properties of an optimized polymer concrete. Constr. Build. Mater., 25: 3540-3549.
    Direct Link  |  
  6. Shokrieh, M.M., M.H. Rarani and M.R. Ayatollahi, 2011. Delamination R-curve as a material property of unidirectional glass/epoxy composites. Mater. Des. .
    Direct Link  |  
  7. Shokrieh, M.M., M.H. Rarani and M.R. Ayatollahi, 2011. Calculation of GI for a multidirectional composite double cantilever beam on two-parametric elastic foundation. Aerosp. Sci. Technol., 15: 534-543.
  8. Shokrieh, M.M. and V. Nasir, 2011. A study on the strength behavior and crack formation mechanism in E-glass fiber under corrosion conditions. Sharif J. Sci. Technol. 10.1177/0021998311410481.
    CrossRef  |  
  9. Shokrieh, M.M. and S.M. Mahdavi, 2011. Equivalent fiber model for calculation of stiffness of a cnt/epoxy composite using micromechanics method. Proceedings of the 19th Annual Conference on Mechanical Engineering-ISME2011, May 10-12, 2011, The University of Birjand, Birjand, In Persian, Iran. -.
  10. Shokrieh, M.M. and S. Akbari, 2011. Simulated slitting method for determination of residual stresses in isotropic materials. Proceedings of the 19th Annual Conference on Mechanical Engineering-ISME2011, May 10-12, 2011, The University of Birjand, Birjand, In Persian, Iran. -.
  11. Shokrieh, M.M. and R.S. Akbari, 2011. Simulation of slitting method for calculation of compliance functions of laminated composites. J. Compos. Mater. 10.1177/0021998311415725.
    CrossRef  |  
  12. Shokrieh, M.M. and R. Mosalmani, 2011. Friction forces between sheet molding compound charge and mold cavity surface in compression molding. Key Eng. Mater., 471-472: 733-738.
    Direct Link  |  
  13. Shokrieh, M.M. and M.S. Mazloomi, 2011. A new analytical model for calculation of stiffness of three-dimensional four-directional braided composites. Compos. Struct. .
    Direct Link  |  
  14. Shokrieh, M.M. and M.J. Omidi, 2011. Investigating the transverse behavior of glass-epoxy composites under intermediate strain rates. Compos. Struct., 93: 690-696.
    Direct Link  |  
  15. Shokrieh, M.M. and M.H. Rarani, 2011. Comparative study for beams on elastic foundation models to analysis of mode I delamination in DCB specimen. Struct. Eng. Mech., 37: 149-162.
  16. Shokrieh, M.M. and M. Safarabadi, 2011. Effects of imperfect adhesion on thermal micro-residual stress of polymer matrix composites. J. Adhes. Adhes., 31: 490-497.
    Direct Link  |  
  17. Shokrieh, M.M. and M. Safarabadi, 2011. Effect of fiber transverse isotropy on micro-residual stresses in polymeric composites. J. Strain Anal. Eng. Des. 10.1177/0309324711416184.
    CrossRef  |  
  18. Shokrieh, M.M. and M. Elahi, 2011. Comparison of mori-tanaka and double inclusion methods in estimation of stiffness properties of a composite material made of micro-mica plates and epoxy resin. Proceedings of the 19th Annual Conference on Mechanical Engineering-ISME2011, May 10-12, 2011, The University of Birjand, Birjand, In Persian, Iran. -.
  19. Shokrieh, M.M. and H. Abdolvand, 2011. Three-dimensional modeling and experimental validation of heat transfer in polymer matrix composites exposed to fire. J. Compos. Mater., 45: 1953-1965.
    CrossRef  |  
  20. Shokrieh, M.M. and A.M. Aghdami, 2011. A dynamic transient model to simulate the time dependent pultrusion process of glass/polyester composites. Applied Compos. Mater., 11: 1-7.
    CrossRef  |  
  21. Shokrieh, M.M. and A. Askari, 2011. Consecutive structural similitude for composite plates under buckling after impact. J. Ferdowsi Mashhad Univ., 22: 1-16.
  22. Shokrieh, M.M. and A. Asadi, 2011. Determination of maximum negative Poisson's ratio for laminated fiber composites. Phys. Status Solidi B, Phys. Status Solidi B, 248: 1237-1241.
    CrossRef  |  
  23. Chitsazzadeh, M., H. Shahverdi and M.M. Shokrieh, 2011. Fabrication of multi-walled carbon nanotube/Vinyl Ester Nanocomposites: Dispersion and stabilization. J. Defect Diffus. Forum, 312-315: 460-465.
    Direct Link  |  
  24. Ayatollahi, M.R., S. Shadlou, M.M. Shokrieh and M. Chitsazzadeh, 2011. Effect of multi-walled carbon nanotube aspect ratio on mechanical and electrical properties of epoxy-based nanocomposites. Polym. Test., 30: 548-556.
    Direct Link  |  
  25. Ayatollahi, M.R., S. Shadlou and M.M. Shokrieh, 2011. Multiscale modeling for mechanical properties of carbon nanotube reinforced nanocomposites subjected to different types of loading. Compos. Struct., 93: 2250-2259.
    Direct Link  |  
  26. Ayatollahi, M.R., S. Shadlou and M.M. Shokrieh, 2011. Mixed mode brittle fracture in epoxy/multi-walled carbon nanotube nanocomposites. Eng. Fract. Mech., 78: 2620-2632.
    Direct Link  |  
  27. Ayatollahi, M.R., S. Shadlou and M.M. Shokrieh, 2011. Fracture toughness of epoxy/multi-walled carbon nanotube nano-composites under bending and shear loading conditions. Mater. Des., 32: 2115-2124.
  28. Ayatollahi, M.R., S. Shadlou and M.M. Shokrieh, 2011. Correlation between aspect ratio of MWCNTs and mixed mode fracture of epoxy based nanocomposites. Mater. Sci. Eng. A, 528: 6173-6178.
    Direct Link  |  
  29. Taheri-Behrooz, F., M.M. Shokrieh and L.B. Lessard, 2010. Progressive fatigue damage modeling of cross-ply laminates, II: Experimental evaluation. J. Compos. Mater., 44: 1261-1277.
    CrossRef  |  
  30. Shokrieh, M.M., M. Heidari-Rarani and M.R. Ayatollahi, 2010. A new model for determining the mode-i fracture toughness of dcb specimen using timoshenko beam on two-parameters elastic foundation. Proccedings of the 18th Annual International Conference on Mechanical Engineering, May, 11-13, 2010, Sharif University, Iran, -.
  31. Shokrieh, M.M., A.R. Kefayati and M. Chitsazzadeh, 2010. Investigation of mechanical properties of clay/epoxy nanocomposites. Proceedings of the 2nd International Conference on Composites: Characterization, Fabrication and Application, December 27-30, 2010, Kish Island-Iran. -.
  32. Shokrieh, M.M., A. Torabizadeh and A. Fereidoon, 2010. Tensile response of GFRPs at low temperature using progressive damage modeling. Proceedings of International Conference on Applied Mechanics, September 28-30, 2010, Amsterdam, Netherlands. -.
  33. Shokrieh, M.M. and S. Niakan, 2010. Calculation of elastic modulus of cnt/epoxy composites, using averaging method. Majlesi J. Mech. Eng., 4: 1-9.
  34. Shokrieh, M.M. and S. Mazloomi, 2010. An analytical method for calculating stiffness of two-dimensional tri-axial braided composites. Compos. Struct., 92: 2901-2905.
  35. Shokrieh, M.M. and R. Rafiee, 2010. Stochastic multi-scale modeling of CNT/polymer composites. Comput. Mater. Sci., 50: 437-446.
  36. Shokrieh, M.M. and R. Rafiee, 2010. Prediction of mechanical properties of an embedded carbon nanotube in polymer matrix based on developing an equivalent long fiber. Mech. Res. Commun., 37: 235-240.
    CrossRef  |  
  37. Shokrieh, M.M. and R. Rafiee, 2010. Prediction of Young's modulus of graphene sheets and carbon nanotubes. Mater. Des., 31: 790-795.
    CrossRef  |  
  38. Shokrieh, M.M. and R. Rafiee, 2010. On the tensile behavior of an embedded carbon nanotube in polymer matrix with non-bonded interphase region. Composite Struct., 92: 647-652.
    CrossRef  |  
  39. Shokrieh, M.M. and R. Rafiee, 2010. Load transfer efficiency in cnt/epoxy: A parametric study on the effect of cnt length and non-bonded interphase. Proceedings of the 3rd Conference on Nanostructures (NS2010), March 10-12, 2010, Kish Island, Iran -.
  40. Shokrieh, M.M. and R. Rafiee, 2010. Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites. Compos. Struct., 92: 2415-2420.
    Direct Link  |  
  41. Shokrieh, M.M. and R. Rafiee, 2010. Development of a full range multi-scale model to obtain elastic properties of CNT/polymer composites. Proceedings of the 2nd International Conference on Composites: Characterization, Fabrication and Application, December 27-30, 2010, Kish Island-Iran. -.
  42. Shokrieh, M.M. and R. Rafiee, 2010. Determination of stochastic properties of CNT/Epoxy composites. Proceeding of the Tenth International Conference on Computational Structures Technology, September 14-17, 2010, Valencia, Spain -.
  43. Shokrieh, M.M. and R. Rafiee, 2010. A review of the mechanical properties of isolated carbon nanotubes and carbon nanotube composites. Mech. Compos. Mater., 46: 155-172.
    CrossRef  |  Direct Link  |  
  44. Shokrieh, M.M. and P.H.M. Attar, 2010. A new method for modeling of initiation and propagation of delamination between θ layers of laminated composites. Applied Compos. Mater., 17: 441-452.
    CrossRef  |  
  45. Shokrieh, M.M. and M.J. Omidi, 2010. Progressive dynamic damage modeling of fiber-reinforced composite structures under different loading rates. J. Compos. Mater., 44: 2723-2745.
    CrossRef  |  
  46. Shokrieh, M.M. and M.A.R. Ghanei, 2010. Investigation of residual thermal stresses in fiber reinforced composites incorporating inhomogeneous interphase region. Proccedings of the International Mechanical Engineering Congress and Exhibition, November 12-18, 2010, Canada, -.
  47. Shokrieh, M.M. and M.A.R. Ghanei, 2010. Introduction of a new finite element model to investigate the residual thermal stresses in fiber-reinforced composites.. Proccedings of the 9th Iranian Aerospace Society Conference, Feb. 8-10, 2010, Islamic Azad University, Science and Research Branch, -.
  48. Shokrieh, M.M. and M.A. Aghdami, 2010. Simulation of thermoset resin curing using finite element method. Proceeding of the 10th Iranian Conference on Manufacturing Engineering, March 1-3, 2010, Babol Noshirvani University of Technology, in Persian -.
  49. Shokrieh, M.M. and M. Memar, 2010. Stress corrosion cracking of basalt/epoxy composites. Applied Compos. Mater., 17: 121-135.
    CrossRef  |  
  50. Shokrieh, M.M. and M. Memar, 2010. Aging of basalt/epoxy composites under scc. Proceeding of the 4th International Conference of the Institute of Materials Systems IMS/4, Applications of Traditional and High Performance Materials in Harsh Environments, March 24-25, 2010, Sharja, AUS -.
  51. Shokrieh, M.M. and M. Ghajar, 2010. Simulation of mode I strain energy release rate for laminated composite using a simple finite element model. Majlesi J., 3: 1-8.
  52. Shokrieh, M.M. and M. Ghajar, 2010. A simple model for simulation of mode I strain energy release rate of a rectangular laminated composite. Proceedings of the 2nd International Conference on Composites: Characterization, Fabrication and Application, December 27-30, 2010, Kish Island-Iran. -.
  53. Shokrieh, M.M. and F.T. Ramezanpour, 2010. Investigation of machining parameters and stacking sequence on delamination of polymer composites. Proceeding of the 10th Iranian Conference on Manufacturing Engineering, March 1-3, 2010, Babol Noshirvani University of Technology -.
  54. Shokrieh, M.M. and F. Taheri-Behrooz, 2010. Progressive fatigue damage modeling of cross-ply laminates I: Modeling strategy. J. Compos. Mater., 44: 1217-1231.
    CrossRef  |  
  55. Shokrieh, M.M. and A.R.G. Mohammadi, 2010. Investigation of thermal residual stresses due to curing process of fiber-reinforced composites by finite element analysis. Proceeding of the 10th Iranian Conference on Manufacturing Engineering, March 1-3, 2010, Babol Noshirvani University of Technology -.
  56. Shokrieh, M.M. and A.M. Aghdami, 2010. Simulation of pultrusion manufacturing process of glass/polyester composites. Iran. J. Polym. Sci. Technol., 23: 323-333.
    Direct Link  |  
  57. Shokrieh, M.M. and A.M. Aghdami, 2010. A novel model for simulation of glass/polyester pultrusion process. Proceedings of the 2nd International Conference on Composites: Characterization, Fabrication and Application, December 27-30, 2010, Kish Island-Iran. -.
  58. Shokrieh, M.M. and A. Torabizadeh, 2010. An investigation on damage of quasi-isotropic laminated composites under static tensile loading in low temperature. Proccedings of the 18th Annual International Conference on Mechanical Engineering, May 11-13, 2010, Sharif University, Iran -.
  59. Shokrieh, M.M. and A. Parsaee, 2010. Investigation of representative volume element in micro-buckling. Proccedings of the 9th Iranian Aerospace Society Conference, Febuary 8-10, 2010, Islamic Azad University, Science and Research Branch, -.
  60. Shokrieh, M.M. and A. Parsaee, 2010. Calculation of in-plane mechanical properties of as4/301-6 carbon/epoxy composites. Proccedings of the 9th Iranian Aerospace Society Conference, Febuary 8-10, 2010, Islamic Azad University, Science and Research Branch, -.
  61. Shokrieh, M.M. and A. Nouri, 2010. Progressive failure modeling of laminated composite plates with cut-out. Mod. Process. Manuf. Eng., 1: 11-15.
    Direct Link  |  
  62. Shokrieh, M.M. and A. Karamnejad, 2010. Transient response of strain rate dependent composite plate using finite difference method. Proccedings of the International Mechanical Engineering Congress and Exhibition, November 12-18, 2010, Canada, -.
  63. Shokrieh, M.M. and A. Karamnejad, 2010. Dynamic response of strain rate dependent glass/epoxy composite beams using finite difference method. Int. J. Mech. Ind. Aerosp. Eng., 4: 50-56.
  64. Shokrieh, M.M. and A. Asadi, 2010. Design of modified tabs for testing of symmetric composite thin walled tubes under pure torsional and tensile loadings. Exp. Mech., 50: 307-320.
    CrossRef  |  
  65. Dehkordi, M.T., H. Nosraty, M.M. Shokrieh, G. Minak and D. Ghelli, 2010. Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics. J. Mater. Des., 31: 3835-3844.
    Direct Link  |  
  66. Daneshjoo, K., M.M. Shokrieh, M.G. Moghaddam and R. Telebitooti, 2010. Analytical model of sound transmission through relatively tick fgm cylindrical shells considering third order shear deformation theory. Compos. Struct., 93: 67-78.
  67. Chitsazzadeh, M., H. Shahverdi and M.M. Shokrieh, 2010. Fabrication of multi-walled carbon nanotube/vinyl ester nanocomposites: Dispersion and stabilization. Proccedings of the Conference on Diffusion in Solids and Liquids: Mass Transfer, Heat Transfer and Microstructure and Properties, July 05-07, 2010, Paris, France, -.
  68. Ayatollahi, M.R., S. Shadlou and M.M. Shokrieh, 2010. The effect of multi-walled carbon nanotube dimensions on mechanical properties of epoxy-based nanocomposites. Proceedings of the 2nd International Conference on Composites: Characterization, Fabrication and Application, December 27-30, 2010, Kish Island-Iran. -.
  69. Ayatollahi, M.R., M.M. Shokrieh, S. Shadlou, A.R. Kefayati and M. Chitsazzadeh, 2010. Fabrication of epoxy/multi-walled carbon nanotube-nanoclay nanocomposites: Investigation of fracture toughness. Proceedings of the 2nd International Conference on Composites: Characterization, Fabrication and Application, December 27-30, 2010, Kish Island-Iran. -.
  70. Yazdchi, K., M. Salehi and M.M. Shokrieh, 2009. Analytical and numerical techniques for predicting the interfacial stresses of wavy carbon nanotube / polymer composites. Mech. Compos. Mater., 45: 207-212.
    CrossRef  |  
  71. Shokrieh, M.M., H. Toozandehjani and M.J. Omidi, 2009. Fiber orientation and cross section effects on energy absorbing of composite tubes under axial dynamic loading. Mech. Compos. Mater., 45: 567-576.
    Direct Link  |  
  72. Shokrieh, M.M. and S.S. Dinalchi, 2009. Residual stresses in thermoplastic composites. Iran. J. Polym. Sci. Technol., 25: 477-493.
  73. Shokrieh, M.M. and S.S. Dinalchi, 2009. Optimization of the manufacturing process of natural fibre thermoplastic composites in order to minimize Warpage. Majlesi J. Mech. Eng., 2: 9-15.
    Direct Link  |  
  74. Shokrieh, M.M. and S.R. Atashipour, 2009. Analysis of filling step in vacuum assisted resin transfer molding by considering the effects of injection tube. Mech. Aerosp. J., 5: 41-54.
  75. Shokrieh, M.M. and R. Mosalmani, 2009. Predicting molding forces during compression molding of sheet molding compound (SMC) by a thermal dependent viscous transversely isotropic model. Proceedings of the Seventh International Conference on Composite Science and Technology, January 20-22, 2009, Sharjah. -.
  76. Shokrieh, M.M. and R. Mosalmani, 2009. A novel model of hydrodynamic friction in smc compression molding considering thermal effects. Proceeding of the 9th International Seminar on Polymer Science and Technology, October 17-21, 2009, Iran -.
  77. Shokrieh, M.M. and P. Attar, 2009. A new method for modeling of initiation and propagation of delamination between [0/θo] layers of laminated composites. Proceedings of the Seventh International Conference on Composite Science and Technology, January 20-22, 2009, Sharjah. -.
  78. Shokrieh, M.M. and M.J. Omidi, 2009. Tension behavior of unidirectional glass/epoxy composites under different strain rates. Compos. Struct., 88: 595-601.
    Direct Link  |  
  79. Shokrieh, M.M. and M.J. Omidi, 2009. Tensile response of glass-fiber reinforced polymeric composites under different strain rates. Proceedings of the Seventh International Conference on Composite Science and Technology, January 20-22, 2009, Sharjah. -.
  80. Shokrieh, M.M. and M.J. Omidi, 2009. Investigation of strain rate effects on in-plane shear properties of glass/epoxy composites. Compos. Struct., 91: 95-102.
    Direct Link  |  
  81. Shokrieh, M.M. and M.J. Omidi, 2009. Development of a strain-rate dependent progressive damage model for crash analysis of composite laminate. Proceedimgs of the 9th International Conference on the Mechanical and Physical Behavior of Materials under Dynamic Loading,September 7-11, 2009, DYMAT 2009, Brussels-Belgium. -.
  82. Shokrieh, M.M. and M.J. Omidi, 2009. Compressive response of glass-fiber reinforced polymeric composites to increasing compressive strain rates. Compos. Struct., 89: 517-523.
    Direct Link  |  
  83. Shokrieh, M.M. and M.H. Rarani, 2009. Experimental and analytical studies on one-way concrete slabs reinforced with GFRP molded gratings. Steel Compos. Struct., 9: 439-454.
  84. Shokrieh, M.M. and M.H. Rarani, 2009. Comparison of concrete slabs behavior reinforced with steel rebars and FRP pultruded gratings. J. Struct. Steel, 5: 18-27.
    Direct Link  |  
  85. Shokrieh, M.M. and M. Memar, 2009. Mechanical properties of basal epoxy composites. Majlesi J. Mech. Eng., 2: 65-72.
  86. Shokrieh, M.M. and M. Haghighi, 2009. Fatigue damage modeling of composite laminates with stress concentration: Regional elements model. Iran. Polym. J., 18: 233-246.
  87. Shokrieh, M.M. and H. Abdolvand, 2009. Three dimensional thermo-dynamical modeling of fire effect on polymer composites. Mech. Aerosp. J., 5: 5-32.
  88. Shokrieh, M.M. and A.M. Aghdami, 2009. Simulation of curing process of a polymer resin with a finite element method. Procedding of the 9th International Seminar on Polymer Science and Technology, October 17-21, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran -.
  89. Shokrieh, M.M. and A. Askari, 2009. Structural similitude for composite plates in impact loading. Proceedings of the 9th International Seminar on Polymer Science and Technology, October 17-21, 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran. -.
  90. Ehkordi, T.D.M., M.M. Shokrieh, H. Nosraty, G. Minak, 2009. The Effects of Hybridization on the Impact Properties of Basalt/Nylon Intraply Woven Fabric Composites. Proccedings o9f the 1st International and the 7th National Conference on Textile Engineering, October, 2009, Rasht, Iran, -.
  91. Dehkordi, T.M., D. Gelli, G. Minak, H. Nosraty and M.M. Shokrieh, 2009. The low velocity impact response of intraply basalt/nylon hybrid composites. Proccedings of the ETDCM9-9th Seminar on Experimental Techniques and Design in Composite Materials, September 30-2 October, 2009, DTG University of Padova, Vicenza, -.
  92. Ayatollahi, M.R., A. Shadlou and M.M. Shokrieh, 2009. Numerical simulation of nonlinear mechancial behvior of single-walled carbon nano-tubes. Proceeding of the 9th International Seminar on Polymer Science and Technology, October 17-21, 2009, Iran -.
  93. Yazdchi, K., M. Salehi and M.M. Shokrieh, 2008. Three dimensional finite element modeling of single-walled carbon nanotubes. Proceedings of the 1st International Conference on Composites: Characterization, Fabrication and Application, December 15-18, 2008, Kish-Iran. -.
  94. Yazdchi, K., M. Salehi and M.M. Shokrieh, 2008. Fiber pull-out modeling of wavy cnt/polymer composites. International Conference on MEMS and Nanotechnology, (ICMN '08), May 13-15th, 2008, Kuala Lumpur, Malaysia -.
  95. Taheri-Behrooz, F., M.M. Shokrieh and L.B., Lessard, 2008. Residual stiffness in cross-ply laminates subjected to cyclic loading. Compos. Struct., 85: 205-212.
    Direct Link  |  
  96. Shokrieh, M.M. and S.R. Atashipour, 2008. Resin flow in fiber preform in vacuum assisted resin transfer molding with flexible tools. Iran. J. Polym. Sci. Technol., 21: 329-338.
  97. Shokrieh, M.M. and R. Mosalmani, 2008. Different types of friction forces between sheet molding compound (SMC) charge and cavity surface of mold in compression molding. Proceedings of the 1st International Conference on Composites: Characterization, Fabrication and Application, December 15-18, 2008, Kish-Iran. -.
  98. Shokrieh, M.M. and M. Memar, 2008. Stress corrosion cracking of basalt/epoxy composite under bending loading and in acidic medium. Proceedings of the 1st International Conference on Composites: Characterization, Fabrication and Application, December 15-18, 2008, Kish-Iran. -.
  99. Shokrieh, M.M. and J. Gh., 2008. Penetration analysis of a projectile in a ceramic composite armor. Compos. Struct., 82: 269-276.
    Direct Link  |  
  100. Shokrieh, M.M. and F.T. Behrooz, 2008. Fatigue life evaluation of unidirectional composites by using residual strain energy. Iran. J. Polym. Sci. Technol., 21: 19-26.
    Direct Link  |  
  101. Shokrieh, M.M. and A.R. Nouri, 2008. Geometrically nonlinear analysis of laminated composite shells. Proceedings of the 1st International Conference on Composites: Characterization, Fabrication and Application, December 15-18, 2008, Kish-Iran. -.
  102. Shokrieh, M.M. and A. Najafi, 2008. An experimental evaluation of micromechanical approaches for damping characterization of polymer matrix composites. J. Compos. Mater., 42: 2599-2613.
    CrossRef  |  
  103. Shokrieh, M.M. and A. Bayat, 2008. Simulation of ultraviolet radiation effects on mechanical properties of glass/polyester composites. Sharif J. Sci. Technol., 42: 49-57.
    Direct Link  |  
  104. Ghasemi, A. and M.M. Shokrieh, 2008. Determination of integral method for determining of non-uniform residual stresses in laminated composites. Iran. J. Polym. Sci. Technol., 21: 347-355.
  105. Akhbari, M., M.M. Shokrieh and H. Nosraty, 2008. A study on buckling behavior of composite sheets reinforced by hybrid woven fabrics. Trans. Can. Soc. Mech. Eng., 32: 81-89.
    Direct Link  |  
  106. Shokrieh, M.M., L.B. Lessard and A. Golubovic, 2007. Adhesively bonded carbon/titanium joints under in-plane and bending loads. Iran. Polym. J., 16: 291-307.
    Direct Link  |  
  107. Shokrieh, M.M., H. Toozandehjani and M.J. Omidi, 2007. Considering the effects of cross section and fiber orientation of composite tubes under axial loading in energy absorption. Iran. J. Polym. Sci. Technol., 20: 289-296.
    Direct Link  |  
  108. Shokrieh, M.M. and V. Nasir, 2007. Modeling of static and vibration behavior of composite gratings. 15 Annual International Conference of Mechanical Engineering, May 15-17, 2007, Amirkabir University -.
  109. Shokrieh, M.M. and S.R. Atashipour, 2007. The effect of injection pipe on constant pressure vacuum assisted resin transfer molding process. 2nd Tehran International Congress on Manufacturing Engineering, December 10-13, 2007, IUST, Tehran, Iran -.
  110. Shokrieh, M.M. and S.R. Atashipour, 2007. Analysis of vacuum assisted resin transfer molding. Proceedings of the 2nd Tehran International Congress on Manufacturing Engineering, December 10-13, 2007, IUST, Tehran, Iran. -.
  111. Shokrieh, M.M. and S.E. Sonbolestan, 2007. Effects of structural parameters on mechanical properties of nanoclay/polymer composites. Iran. J. Polym. Sci. Technol., 20: 187-195.
  112. Shokrieh, M.M. and M.R. Ghasemi, 2007. Simulation of central hole drilling process for measurement of residual stresses in isotropic, orthotropic and laminated composites plates. J. Compos. Mater., 41: 535-552.
    CrossRef  |  
  113. Shokrieh, M.M. and M.R. Ghasemi, 2007. Effects of interlaminar residual stresses of polymer composites using hole drilling method. Iran. J. Polym. Sci. Technol., 20: 337-347.
  114. Shokrieh, M.M. and M.R. Ghasemi, 2007. Determining calibration factors of the hole drilling method for orthotropic composite using an exact solution. J. Compos. Mater., 41: 2293-2312.
    Direct Link  |  
  115. Shokrieh, M.M. and M.R. Ghasemi, 2007. An exact solution for determining calibration factors of the hole drilling method for an orthotropic plate. Iran. J. Polym. Sci. Technol., 6: 437-448.
  116. Shokrieh, M.M. and M.H. Rarani, 2007. Analysis of Fiberglass Reinforced Plastic (FRP) molded grating. Iran. Polym. J., 16: 511-520.
    Direct Link  |  
  117. Shokrieh, M.M. and M. Zakeri, 2007. Generalized technique for cumulative damage modeling of composite laminates. J. Compos. Mater., 41: 2643-2656.
    CrossRef  |  
  118. Shokrieh, M.M. and M. Rahmat, 2007. Effects of young's modulus on fundamental diagrams of a sleeper on an elastic foundation. Applied Math. Model., 31: 700-711.
  119. Shokrieh, M.M. and M. Heidari-Rarani, 2007. Reinforcement of concrete slabs with FRP pultruded grating (analytical and finite element solutions). The 5-th Moscow International Conference, Theory and Practice of Technologies of Manufacturing, April 24-27, 2007, Composite Materials and New Metal Alloys Products, (TMCMM), Moscow, Russia -.
  120. Shokrieh, M.M. and M. Esmaeili, 2007. Impact analysis of a composite guardrail. International Conference on Steel and Composite Structures, 30 July-1 August 2007, ICSCS'07, Manchester, UK -.
  121. Shokrieh, M.M. and H.R. Abdolvand, 2007. Finite element analysis of polymer composites under fire. The 2nd Conference on Fire Protection of Buildings, February 20-21, 2007, Tehran, Iran -.
  122. Shokrieh, M.M. and H.R. Abdolvand, 2007. Determination of fire effects on polymer composites by considering changes in thermal properties. 15 Annual International Conference of Mechanical Engineering, May 15-17, 2007, Amirkabir University -.
  123. Shokrieh, M.M. and A. Najafi, 2007. Damping characterization and viscoelastic behavior of laminated polymer matrix composites using a modified classical lamination theory. Exp. Mech., 47: 831-839.
    CrossRef  |  
  124. Shokrieh, M.M. and A. Bayat, 2007. Effects of ultraviolet radiation on mechanical properties of glass/polyester composites. J. Compos. Mater., 41: 2443-2455.
    CrossRef  |  
  125. Fakhar, N. and M.M. Shokrieh, 2007. A new procedure for dynamic calibration of drop weight impact tester. 2nd Tehran International Congress on Manufacturing Engineering, December 10-13, 2007, IUST, Tehran, Iran -.
  126. Alipour, M. and M.M. Shokrieh, 2007. Design and weight optimization of pin loaded composite plates. Majlesi J. Mech. Eng., 1: 16-16.
    Direct Link  |  
  127. Akhbari, M., M.M. Shokrieh, H. Nosraty, S.M.H. Zebarjadnejad and A. Rashidi, 2007. A study on buckling behavior of composite sheets reinforced by hybrid woven fabrics. The 9th Asian Textile Conference, June 28-30, 2007, Taiwan -.
  128. Akhbari, M., H. Nosraty, M.M. Shokrieh, A. Jeddi and M. Mohammadian, 2007. The comparison between impact resistance of woven fabric composites and cross-ply unidirectional composites. The 9th Asian Textile Conference, June 28-30, 2007, Taiwan -.
  129. Shokrieh, M.M., R. Ahmad and K. Ghasemi, 2006. Simulation of hole drilling process in isotropic, orthotropic, and laminated composite materials. Eng. J. Tehran Univ., 40: 825-837.
  130. Shokrieh, M.M. and S.E. Sonbolestan, 2006. Simulation of mechanical properties of clay/polymer nano composites. 14 Annual International Conference of Mechanical Engineering, May 16-18, 2006, Esfahan -.
  131. Shokrieh, M.M. and R. Rafiee, 2006. Simulation of fatigue failure in a full composite wind turbine blade. Composite Struct., 74: 332-342.
    CrossRef  |  
  132. Shokrieh, M.M. and R. Rafiee, 2006. Mechanical properties of biaxial and triaxial composites based on limited experimental data. Int. J. Eng. Sci., 17: 29-35.
  133. Shokrieh, M.M. and M. Fakhar, 2006. Effects of low velocity impact on sandwich laminated composites. 14 Annual International Conference of Mechanical Engineering, May 16-18, 2006, Esfahan -.
  134. Shokrieh, M.M. and F. Taheri-Behrooz, 2006. A phenomenological model to study the fatigue behavior of unidirectional composites. 9th International Fatigue Congress, 14-19 May 2006, Atlanta, USA -.
  135. Shokrieh, M.M. and B.F. Taheri, 2006. A unified fatigue life model based on energy method. Compos. Struct., 75: 444-450.
    Direct Link  |  
  136. Shokrieh, M.M. and A.R. Ghasemi, 2006. Simulation of central hole drilling process for determining of residual stresses in isotropic materials. Int. J. Eng. Sci., 17: 25-32.
    Direct Link  |  
  137. Shokrieh, M.M. and A.R. Ghasemi, 2006. Determining of interlaminar stresses for isotropic and orthotropic materials with central hole drilling method. 14 Annual International Conference of Mechanical Engineering, May 16--18, 2006, Esfahan -.
  138. Shokrieh, M.M. and A. Najafi, 2006. Experimental evaluation of dynamic behavior of metallic plates reinforced by polymer matrix composites. Compos. Struct., 75: 472-478.
    Direct Link  |  
  139. Shokrieh, M.M. and A. Heidari, 2006. Design of composite space structures. 14 Annual International Conference of Mechanical Engineering, May 16-18, 2006, Esfahan -.
  140. Hosseinzadeh, R., M.M. Shokrieh and L.B. Lessard, 2006. Damage behavior of fiber reinforced composite plates subjected to drop weight impacts. J. Compos. Sci. Technol., 66: 61-68.
    Direct Link  |  
  141. Shokrieh, M.M., H. Nosrati and M. Akhbari, 2005. Tensile strength studies of woven fabric polyester/ polyester composites. The 8th Asian Textile Conference, Textile and Modern Sciences, May 9--11, 2005, Tehran, Iran, pp: 9-.
  142. Shokrieh, M.M., F. Taheri-Behrooz and R. Moslemian, 2005. Repairing corroded gas transmission pipelines using composite materials. Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tehran, Iran -.
  143. Shokrieh, M.M. and S.M.K. Shahri, 2005. Theoretical and experimental studies on residual stresses in laminated polymer composites. J. Compos. Mater., 39: 2213-2225.
    CrossRef  |  
  144. Shokrieh, M.M. and R. Rafiee, 2005. Stochastic fatigue analysis of a horizontal axis wind turbine composite blade. Proceedings of the Fifth International Conference on Composite Science and Technology, February 1-3, 2005, American University of Sharjah, pp: 197-202.
  145. Shokrieh, M.M. and M.J. Omidi, 2005. Reinforcement of metallic plates with composite materials. J. Compos. Mater., 39: 723-744.
    CrossRef  |  
  146. Shokrieh, M.M. and A. Najafi, 2005. Damping characterization of polymer matrix composites based on micromechanics approach, Theory and Experiment. Proceedings of the Fifth International Conference on Composite Science and Technology, February 1-3, 2005, American University of Sharjah, pp: 209--214.
  147. Najafi A., M.M. Shokrieh, S.A.M. Ghannadpour and B. Mohammadi, 2005. The effect of circular/elliptical cutouts on the buckling behavior of laminated composites plates. Proceedings of the Fifth International Conference on Composite Science and Technology, February 1-3, 2005, American University of Sharjah, pp: 71-76.
  148. Mohammadi, B., S.A.M. Ghannadpour, M.M. Shokrieh and A. Najafi, 2005. The post buckling analysis of laminated composites containing circular/elliptical holes. Proceedings of the Fifth International Conference on Composite Science and Technology, February 1-3, 2005, American University of Sharjah, pp: 335-340.
  149. Hosseinzadeh, R., M. Shokrieh and L.B. Lessard, 2005. Parametric study of automotive composite bumper beams subjected to low-velocity impacts. J. Composite Struct., 68: 419-427.
    CrossRef  |  
  150. Shokrieh, M.M. and S.M.K. Shahri, 2004. Residual stresses in thermoset polymer composites. Proceedings of the Second International Conference on Structural Engineering Mechanics and Computation, July 5-7, 2004, Cape Town, South Africa, pp: 47-47.
  151. Shokrieh, M.M. and D. Rezaee, 2004. Replacement of a metallic leaf spring with a composite materials. Mech. Eng., 12: 10-13.
  152. Shokrieh, M.M. and A. Hasani, 2004. Study of shear buckling of composite shafts under torsion. Compos. Struct., 64: 63-69.
  153. Shokrieh, M.M. and H.R. Sokhanvar, 2003. Optimum fiber volume fraction of composite materials, using compressive properties. Int. J. Eng. Sci., 14: 3-4.
    Direct Link  |  
  154. Shokrieh, M.M. and D. Rezaee, 2003. Analysis and optimization of a composites leaf spring. Compos. Struct., 60: 317-325.
  155. Shokrieh, M.M. and M. Mozafari, 2002. Study of residual compressive strength of a glass/epoxy plate under low velocity impact. Eng. J. Tehran Univ., 36: 409-416.
  156. Shokrieh, M.M. and K. Haghiri, 2002. Design and failure analysis of composite pressure vessels using effective parameters. Int. J. Eng. Sci., 12: 71-80.
  157. Shokrieh, M.M. and A. Hasani, 2002. Shear buckling of composite drive shafts under torsion. Proccedings of the The Sixth International Conference on Flow Process in Composite Materials (FPCM-6), July, 15-17, 2002, Auckland, New Zealand, -.
  158. Shokrieh, M.M. and A. Bohlool, 2002. Sensitivity of finite element method to variation of mechanical properties of unidirectional plies. Int. J. Eng. Sci., 13: 135-143.
  159. Shokrieh, M.M. and A. Bohlool, 2002. Sensitivity of classical laminated plate theory to variation of mechanical properties of unidirectional plies. Int. J. Eng. Sci., 13: 81-91.
  160. Hassani, F., M.M. Shokrieh and L.B. Lessard, 2002. A fully non-linear 3-d constitutive relationship for the stress analysis of a pin-loaded composite laminate. Compos. Sci. Technol., 62: 429-439.
    CrossRef  |  
  161. Shokrieh, M.M., A. Seyed, M. Malevajerdi, 2001. Strengthening of reinforced concrete beams using composite laminates. Proccedings of the International Conference on FRP Composites in Civil Engineering, December 12-14, 2001, Hong Kong, -.
  162. Shokrieh, M.M. and R. Rafiee, 2001. Structural design of composite transmission poles. Proccedings of the International Conference on Materials for Advanced Technologies (ICMAT 2001), July 1-6, 2001, Singapore, -.
  163. Shokrieh, M.M. and F.T. Behrooz, 2001. Wing instability of a full composite aircraft. Compos. Struct., 54: 335-340.
    Direct Link  |  
  164. Shokrieh, M.M. and F.T. Behrooz, 2001. Study on wing bending-aileron rotation flutter of a full composite aircraft. Int. J. Eng. Sci., 12: 153-162.
    Direct Link  |  
  165. Shokrieh, M.M. and F.T. Behrooz, 2001. Study on bending-torsion flutter of wing of a full composite aircraft. Int. J. Eng. Sci., 12: 11-22.
    Direct Link  |  
  166. Shokrieh, M.M. and L.B. Lessard, 2000. Progressive fatigue damage modeling of composite materials, part II: Material characterization and model verification. J. Compos. Mater., 34: 1081-1116.
    CrossRef  |  
  167. Shokrieh, M.M. and L.B. Lessard, 2000. Progressive fatigue damage modeling of composite materials, part I: Modeling. J. Compos. Mater., 34: 1056-1080.
    CrossRef  |  
  168. Shokrieh, M.M. and K. Haghiri, 2000. Effective parameters on optimum design of composite pressure vessels. Proccedings of the ECCM9, Composites -From Fundamentals to Exploitation, June 4-7, 2000, The Premier Composites Conference in Europe, Brighton, England,-.
  169. Shokrieh, M.M. and A. Bohlool, 2000. Effects of mechanical properties of unidirectional plies on stress analysis of composite structures. Proccedinds of the ACCM-2000, Second Asian-Australasian Conference on Composite Materials, August 18-20, 2000, Korea, Kyongju, pp: 535-542.
  170. Shokrieh, M.M. and H. Mohamadi-Rad, 1999. The effect of sealing liner on mechanical behavior of composite vessels under internal pressure. Int. J. Eng. Sci., 10: 59-72.
  171. Diao, X., L.B. Lessard and M.M. Shokrieh, 1999. Statistical model for multiaxial fatigue behavior of unidirectional plies. Compos. Sci. Technol., 59: 2025-2035.
    CrossRef  |  
  172. Shokrieh, M.M. and L.B. Lessard, 1998. An assessment of the double-notch shear test for interlaminar shear characterization of unidirectional graphite/epoxy under static and fatigue loading. Applied Compos. Mater., 5: 49-64.
    Direct Link  |  
  173. Shokrieh, M.M., O. Eilers and L.B. Lessard, 1997. Characterization of a graphite/epoxy composite under in-plane shear fatigue loading. High Temp. Environ. Effects Polym. Compos. Second Symp., 1302: 133-148.
    Direct Link  |  
  174. Shokrieh, M.M., 1997. Thermally conductive composites for use in space. Ph.D. Thesis, Department of Mechanical Engineering, McGill University, Montreal, Canada,.
  175. Shokrieh, M.M., 1997. Fatigue damage modeling of mechanical joints made of composite materials. Proccedings of the International Symposium, August 19-24, 1997, Zhukovsky, Moscow, Russia, pp: 343-351.
  176. Shokrieh, M.M. and L.B. Lessard, 1997. Multiaxial fatigue behaviour of unidirectional plies based on uniaxial fatigue experiments i. Theory. Int. J. Fatigue, 19: 201-207.
    Direct Link  |  
  177. Shokrieh, M.M. and L.B. Lessard, 1997. Multiaxial fatigue behaviour of unidirectional plies based on uniaxial fatigue experiments II: Experimental evaluation. Int. J. Fatigue, 19: 209-217.
    Direct Link  |  
  178. Shokrieh, M.M. and L.B. Lessard, 1997. Modification of the three-rail shear test for composite materials under static and fatigue loading. Test. Des., 1242: 217-233.
    Direct Link  |  
  179. Shokrieh, M. M., 1996. Progressive fatigue damage modeling of composite materials. Ph.D. Thesis, Department of Mechanical Engineering, McGill University, Montreal, Canada,.
  180. Lessard, L.B., A.S. Schmit and M.M. Shokrieh, 1996. Three-dimensional stress analysis of free-edge effects in a simple composite cross-ply laminate. Int. J. Solids Struct., 33: 2243-2259.
    Direct Link  |  
  181. Shokrieh, M.M. and L.B. Lessard, 1995. Effects of material nonlinearity on the three-dimensional stress state of pin-loaded composite laminates. J. Compos. Mater., 30: 839-861.
    CrossRef  |  
  182. Lessard, L.B., O.P. Eilers and M.M. Shokrieh, 1995. Testing of in-plane shear properties under fatigue loading. J. Reinf. Plast. Compos., 14: 965-987.
    Direct Link  |  
  183. Lessard, L.B. and M.M. Shokrieh, 1995. Two-dimensional modeling of composite pinned/bolted joint failure. J. Compos. Mater., 29: 671-697.
    CrossRef  |  
  184. Lessard, L.B., M.M. Shokrieh and A.S. Schmit, 1993. Three dimensional stress analysis of composite plates with or without stress concentrations. Proccedings of the 9th International Conference on Composite Materials, July, 12-16, 1993, Madrid, Spain, pp: 243-250.
  185. Lessard, L.B. and M.M. Shokrieh and J.H. Esbensen, 1993. Analysis of stress singularities in laminated composite pinned/bolted joints. Proccedings of the 38th SAMPE Symposium and Exhibition, May 10-13, 1993, Anaheim, California, PP: 53-60.
  186. Shokrieh, M.M., 1991. Failure of laminated composite pinned connections. Thesis, Masters, Department of Mechanical Engineering, McGill University, Montreal, Canada,.
  187. Shokrieh, M.M., 1984. Computer simulation of the internal combustion engine crankshaft. B.Sc. Thesis, Department of Mechanical Engineering, Iran University of Science and Technology,.