Dr. V. Jayaseelan's LiveDNA Profile

Advancements in electrical discharge machining of AMCs: a review of modeling approaches, optimization strategies and sustainability trends

Jayaseelan V., Jayabalakrishnan D., Ashok Gandhi R., Raja P., Basheer Aazaad, Seeman M., Muthuramalingam T.

Machining Science and Technology | Journal Article

10.1080/10910344.2026.2744965

2026

Circular economy strategies in agriculture: developments, challenges, and sustainability implications

V. Jayaseelan, P. Raja, V. Balasundaram, K. Sudhakar

Journal of Material Cycles and Waste Management | Journal Article

10.1007/s10163-026-02756-4

2026

Optimizing Tribological Characteristics in Magnesium–Aluminum–Silicon Alloys through the Application of the Taguchi Method and Artificial Neural Network

A. Nagaraj, S. Gopalakrishnan, D. Shivalingappa, V. Jayaseelan

Journal of Materials Engineering and Performance | Journal Article

10.1007/s11665-025-12537-z

2026

Real-time monitoring of friction stir welding of AA5083 similar joint using acoustic emission technique

Senthilkumar Kannaiyan, Seeman Murugesan, Jayaseelan Veerasundaram, Sivaraj Paramasivam

CIRP Journal of Manufacturing Science and Technology | Journal Article

10.1016/j.cirpj.2026.03.007

2026

Acoustic emission technique for detection and identification of defects in friction stir welded AA6061-T6 Al alloy joint

Senthilkumar Kannaiyan, Seeman Murugesan, Jayaseelan Veerasundaram, Dhamotharakannan Thirumalaikannan

International Journal of Lightweight Materials and Manufacture | Journal Article

10.1016/j.ijlmm.2025.12.003

2025

Effects of lubricants and billet geometry on the extrusion of AA6063/5% SiCp composites

Jayaseelan Veerasundaram, Kalaichelvan Kani, Ramasamy Nallumuthu, Muthuramalingam Thangaraj

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | Journal Article

10.1177/09544089231163114

2024

Experimental and theoretical investigation of extrusion load for AA6063/SiC extruded composite billet

Jayaseelan Veerasundaram, Kalaichelvan Kani, Ramasamy Nallumuthu, Muthuramalingam Thangaraj

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | Journal Article

10.1177/09544089221111283

2023

Investigation of AA6061-T6's mechanical and microstructural properties by modification on the tool path in friction stir welding

D Jayabalakrishnan, M Balasubramanian, V Jayaseelan, T Muthuramalingam

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | Journal Article

10.1177/09544089221124290

2023

Influence of SiCp volume percentage on AA6063/SiCp MMC extrusion process: An experimental, theoretical and simulation analysis

Veerasundaram Jayaseelan, Kani Kalaichelvan, Nallamuthu Ramasamy, Murugesan Seeman

International Journal of Lightweight Materials and Manufacture | Journal Article

10.1016/j.ijlmm.2023.03.001

2023

Application of MOORA & COPRAS integrated with entropy method for multi-criteria decision making in dry turning process of Nimonic C263

Munuswamy Krishna, Sathuvachari Devarajan Kumar, Chakaravarthy Ezilarasan, Perumalsamy Vishnu Sudarsan, Viswanathan Anandan, Sivaprakasam Palani, Veerasundram Jayaseelan

Manufacturing Review | Journal Article

10.1051/mfreview/2022014

2022

Effect of extrusion ratio and die angle on the microstructure of an AA6063/SiC composite

Jayaseelan Veerasundaram, Kalaichelvan Kani, Seeman Murugesan, Ramasamy Nallamuthu

Materials Testing | Journal Article

10.1515/mt-2021-2114

2022

DEFORM 3D Simulations and Taguchi Analysis in Dry Turning of 35CND16 Steel

A. Mathivanan, G. Swaminathan, P. Sivaprakasam, R. Suthan, V. Jayaseelan, M. Nagaraj

Advances in Materials Science and Engineering | Journal Article

10.1155/2022/7765343

2022

Characterization and effect of the use of safflower methyl ester and diesel blends in the compression ignition engine

Balaji Venkatesan, Kaliappan Seeniappan, Ezhumalai Shanmugam, Socrates Subramanian, Jayaseelan Veerasundaram

Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles | Journal Article

10.2516/ogst/2021011

2021

Modelling and Simulation of Machining Attributes in dry Turning of Aircraft Materials Nimonic C263 using CBN

Srinivasan Senthil Kumar, Moranahalli Ponnusamy Sudeshkumar, Chakaravarthy Ezilarasan, Sivaprakasam Palani, Jayaseelan Veerasundaram

Manufacturing Review | Journal Article

10.1051/mfreview/2021030

2021

Experimental Study on Surface Roughness and Flank Wear in Turning of Nimonic C263 under Dry Cutting Conditions

J. Francis Xavier, B. Ravi, D. Jayabalakrishnan, Chakaravarthy Ezilarasan, V. Jayaseelan, G. Elias

Journal of Nanomaterials | Journal Article

10.1155/2021/2054399

2021

Formability analysis of AA6061 sheet in T6 condition.

Vijayananth, S., V. Jayaseelan and G. Shivasubbramanian,

Applied Mech. Mater., | Journal Article

10.4028/www.scientific.net/AMM.766-767.416

Dr. V. Jayaseelan

2015

Lubrication effect on friction factor of AA6063 in forward extrusion process.

Jayaseelan, V. and K. Kalaichelvan,

Procedia Eng., | Journal Article

10.1016/j.proeng.2014.12.238

Dr. V. Jayaseelan

2014

Influence of friction factor on extrusion process.

Jayaseelan, V. and K. Kalaichelvan,

Adv. Mater. Res., | Journal Article

10.4028/www.scientific.net/AMR.622-623.457

Dr. V. Jayaseelan

2013

Size effects in forward extrusion process.

Jayaseelan, V., K. Kalaichelvan and A. Rajadurai,

Int. J. Applied Eng. Res., | Journal Article

Dr. V. Jayaseelan

2011

Effect of heat treatment on friction factor in micro extrusion process.

Jayaseelan, V., K. Kalaichelvan, R. Sivaramakrishnan and T. Arunkumar,

Mater. Sci. Res. India, | Journal Article

Dr. V. Jayaseelan

2009

Dr. V. Jayaseelan

Education

Publications (20)