Dr. S. Nallusamy
My Social Links

Dr. S. Nallusamy

Professor/ ACEE
Jadavpur University, Kolkata, India

Highest Degree
Ph.D. in Mechanical Engineering from Jadavpur University, India

Share this Profile

Area of Interest:

Engineering
100%
Mechanical Engineering
62%
Industrial Engineering and Management
90%
Lean Manufacturing
75%
Engineering and Technology
55%

Research Publications in Numbers

Books
0
Chapters
1
Articles
185
Abstracts
0

Selected Publications

  1. Yugandhar, M., B.P. Kammar and S. Nallusamy, 2022. Experimental investigation on similar and dissimilar materials of AZ31/AZ91 Mg alloys by friction stir welding. Int. J. Eng. Trends Technol., 70: 388-352.
    CrossRef  |  Direct Link  |  
  2. Silvestre, S.E.M., V.D.P. Chaicha, J.C.A. Merino and S. Nallusamy, 2022. Implementation of a lean manufacturing and SLP-based system for a footwear company. Production, Vol. 32. 10.1590/0103-6513.20210072.
    CrossRef  |  Direct Link  |  
  3. Ramos-Valle, E., A. Paulino, P. Chavez, J.C. Alvarez and S. Nallusamy, 2022. Pilot implementation of innovative proposal for service level improvement in a spare parts trading company. Int. J. Eng. Res. Afr., 62: 173-187.
    CrossRef  |  Direct Link  |  
  4. Rajan, K., A.M. Babu, R. Paladi, S. Nallusamy and K.R.S. Kumar, 2022. Performance assessment of DI diesel engine using waste transformer oil with different compression ratios. Int. J Ambient Energy, 43: 3536-3544.
    CrossRef  |  Direct Link  |  
  5. Nallusamy, S., S. Sundar and S. Saravanan, 2022. Experimental Study and Analysis on Surface Integrity by Hardened Steel End Milling. In: Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia, Abdollah, M.F.B., H. Amiruddin, A.S.P. Singh, F.A. Munir and A. Ibrahim (Eds.), Springer, Singapore, ISBN: 978-981-19-3178-9, pp: 381-385.
    CrossRef  |  Direct Link  |  
  6. Nallusamy, S., R.T. Chander and G.V.P. Rao, 2022. Experimental study on reinforced aluminium metal matrix composites with B4C through different techniques. Mater. Sci. Forum, 1065: 59-68.
    CrossRef  |  Direct Link  |  
  7. Madhusudanan, S. and S. Nallusamy, 2022. Analysis and comparison of thermal conductance and indoor air temperature on industrial slag with conventional bricks. Int. J. Ambient Energy, 43: 4555-4568.
    CrossRef  |  Direct Link  |  
  8. Behera, A.K., D. Mishra, S. Nallusamy, D. Konhar and S.N. Mishra, 2022. Fibonacci series-motivated sequential-elliptical-pyramid slotted microstrip antenna with C-band and X-band isolation features. Int. J. Eng. Trends Technol., 70: 118-125.
    CrossRef  |  Direct Link  |  
  9. Sujatha, K., S. Nallusamy, P. Senthilkumaar, A.F. Panimathy and K. Silambarasan, 2021. Study of mineral content available in the brain of ten fishes from two fish landing centres in Tamilnadu and Andra Pradesh. Mate. Today Proc., 37: 810-816.
    CrossRef  |  Direct Link  |  
  10. Sobya, D., S. Nallusamy and C.P. Sarathi, 2021. Improvement of overall performance by implementation of different lean tools - A case study. Int. J. Performability Eng., 17: 804-814.
    CrossRef  |  Direct Link  |  
  11. Senthilkumar, C.B. and S. Nallusamy, 2021. Enrichment of quality rate and output level in a medium scale manufacturing industry by implementation of appropriate quality tools. Mater. Today Proc., 37: 817-822.
    CrossRef  |  Direct Link  |  
  12. Nallusamy, S., M.R. Narayanan, K. Sujatha and R.S. Rekha, 2021. Experimental investigation of mechanical properties and effect of porosity on epoxy granite composite. Mater. Sci. Forum, 1042: 123-129.
    CrossRef  |  Direct Link  |  
  13. Nallusamy, S., 2021. Material modeling of epoxy granite composite by analytical model and regression analysis. Int. J. Performability Eng., 17: 253-262.
    CrossRef  |  Direct Link  |  
  14. Nallusamy, S. and K. Sujatha, 2021. Experimental analysis of nanoparticles with cobalt oxide synthesized by coprecipitation method on electrochemical biosensor using FTIR and TEM. Mater. Today Proc., 37: 728-732.
    CrossRef  |  Direct Link  |  
  15. Sambandan, V.T., T.F. Kala and S. Nallusamy, 2020. An empirical analysis on evaluation of safety attitudes and perceptions of civil engineering and construction management personnel. Int. J. Eng. Trends Technol., 68: 74-80.
    CrossRef  |  Direct Link  |  
  16. Priya, P.S.S., S. Nandhinidevi, M. Thangamani and S. Nallusamy, 2020. A review on exploring the deep learning concepts and applications for medical diagnosis. Int. J. Eng. Trends Technol., 68: 63-66.
    CrossRef  |  Direct Link  |  
  17. Prabu, N.M., S. Nallusamy and G. Sureshkannan, 2020. Investigation of heat transfer enhancement effect on normal and nano coated wick structure heat pipes-A comparative assessment. Int. J. Eng. Res. Afr., 51: 191-198.
    CrossRef  |  Direct Link  |  
  18. Ibrahim, S.J.A., A.M. Affir, M. Thangamani and S. Nallusamy, 2020. Compound feature generation and boosting model for cancer gene classification. Int. J. Eng. Trends Technol., 68: 48-51.
    CrossRef  |  Direct Link  |  
  19. Sendilvelan, S., K. Bhaskar and S. Nallusamy, 2017. Experimental investigation on cerium oxide nanoparticles with alumina catalytic converter to increase emission conversion efficiency in automobiles. Rasayan J. Chem., 10: 454-460.
    Direct Link  |  
  20. Nallusamy, S., S. Sendilvelan, K. Bhaskar and N.M. Prabu, 2017. Analysis of performance, combustion and emission characteristics on biofuel of novel pine oil. Rasayan J. Chem., 10: 873-880.
    Direct Link  |  
  21. Nallusamy, S., R. Balaji and S. Sundar, 2017. Proposed model for inventory review policy through ABC analysis in an automotive manufacturing industry. Int. J. Eng. Res. Afr., 29: 165-174.
    CrossRef  |  Direct Link  |  
  22. Nallusamy, S., 2017. Synthesis and characterization of carbon black-halloysite nanotube hybrid composites using XRD and SEM. J. Nano Res., 45: 208-217.
  23. Nallusamy, S., 2017. Characterization of Al2O3/water nanofluid through shell and tube heat exchangers over parallel and counter flow. J. Nano Res., 45: 155-163.
  24. Nallusamy, S. and N.M. Prabu, 2017. Heat transfer enhancement analysis of Al2O3-water nanofluid through parallel and counter flow in shell and tube heat exchangers. Int. J. Nanosci., 16: 1-7.
  25. Nallusamy, S. and M.A.A. Ahamed, 2017. Implementation of lean tools in an automotive industry for productivity enhancement-a case study. Int. J. Eng. Res. Afr., 29: 175-185.
    CrossRef  |  Direct Link  |  
  26. Nallusamy, S. and G. Majumdar, 2017. Enhancement of overall equipment effectiveness using total productive maintenance in a manufacturing industry. Int. J. Performability Eng., 13: 1-16.
  27. Nallusamy, S. and A. Karthikeyan, 2017. Synthesis and wear characterization of reinforced glass fiber polymer composites with epoxy resin using granite powder. J. Nano Res., 49: 1-9.
  28. Nallusamy, S. and A. Karthikeyan, 2017. Investigation of microstructural and hardness properties of Al-Al2O3 nano surface composite. Nano Hybrids Compos., 15: 36-45.
  29. Karthikeyan, A. and S. Nallusamy, 2017. Experimental analysis on sliding wear behaviour of aluminium-6063 with SiC particulate composites. Int. J. Eng. Res. Afr., 31: 36-43.
    CrossRef  |  Direct Link  |  
  30. Jeevanantham, S., N.M. Sivaram, D.S.R. Smart, S. Nallusamy and N.M. Prabu, 2017. Effect of machining parameters on MRR and surface roughness in internal grinding using EN8, EN31 steel. Int. J. Applied Eng. Res., 12: 2963-2968.
    Direct Link  |  
  31. Rekha, R.S., P. Periyasamy and S. Nallusamy, 2016. Lean tools implementation for lead time reduction in CNC shop floor of an automotive component manufacturing industry. Indian J. Sci. Technol., 9: 1-6.
  32. Rekha, R.S., P. Periyasamy and S. Nallusamy, 2016. An optimized model for reduction of cycle time using value stream mapping in a small scale industry. Int. J. Eng. Res. Afr., 27: 179-189.
    CrossRef  |  Direct Link  |  
  33. Nallusamy, S., N.M. Prabu, J. Jayaprakash and K. Rajan, 2016. Analysis of design features for inspection robot make use of concrete structures: An assessment. Int. J. Eng. Res. Afr., 17: 74-81.
    Direct Link  |  
  34. Nallusamy, S., M. Ganesan, K. Balakannan and C. Shankar, 2016. Environmental sustainability evaluation for an automobile manufacturing industry using multi-grade fuzzy approach. Int. J. Eng. Res. Afr., 19: 123-129.
    CrossRef  |  Direct Link  |  
  35. Nallusamy, S., D. Kumar, K. Balakannan and P.S. Chakraborty, 2016. MCDM tools application for selection of suppliers in manufacturing industries using AHP, fuzzy logic and ANN. Int. J. Eng. Res. Afr., 19: 130-137.
    Direct Link  |  
  36. Nallusamy, S., A.M.M. Umarmukdhar and R.S. Rekha, 2016. A proposed supply chain model for productivity enhancement in medium scale foundry industries. Int. J. Eng. Res. Afr., 20: 248-258.
    CrossRef  |  Direct Link  |  
  37. Nallusamy, S., 2016. Thermal conductivity analysis and characterization of copper oxide nanofluids through different techniques. J. Nano Res., 40: 105-112.
    CrossRef  |  Direct Link  |  
  38. Nallusamy, S., 2016. Study of mechanical properties on bi-directional e-glass fiber with epoxy resin multi walled CNT nanoсomposite. Nano Hybrids, 10: 14-19.
    CrossRef  |  Direct Link  |  
  39. Nallusamy, S., 2016. Productivity enhancement in a small scale manufacturing unit through proposed line balancing and cellular layout. Int. J. Performability Eng., 12: 523-534.
    Direct Link  |  
  40. Nallusamy, S., 2016. Overall performance improvement of an small scale venture using critical key performance indicators. Int. J. Eng. Res. Afr., 27: 158-166.
    CrossRef  |  Direct Link  |  
  41. Nallusamy, S., 2016. Lean manufacturing implementation in a gear shaft manufacturing company using value stream mapping. Int. J. Eng. Res. Afr., 21: 231-237.
    CrossRef  |  Direct Link  |  
  42. Nallusamy, S., 2016. Frequency analysis of lean manufacturing system by different critical issues in Indian automotive industries. Int. J. Eng. Res. Afr., 23: 181-187.
    CrossRef  |  Direct Link  |  
  43. Nallusamy, S., 2016. Enhancement of productivity and efficiency of CNC machines in a small scale industry using total productive maintenance. Int. J. Eng. Res. Afr., 25: 119-126.
    Direct Link  |  
  44. Nallusamy, S., 2016. Efficiency enhancement in CNC industry using value stream mapping, work standardization and line balancing. Int. J. Performability Eng., 12: 413-422.
    Direct Link  |  
  45. Nallusamy, S., 2016. Characterization of epoxy composites with TiO2 additives and E-glass fibers as reinforcement agent. J. Nano Res., 40: 99-104.
    CrossRef  |  Direct Link  |  
  46. Nallusamy, S., 2016. Analysis of welding properties in FSW aluminium 6351 alloy plates added with silicon carbide particles. Int. J. Eng. Res. Afr., 21: 110-117.
    CrossRef  |  Direct Link  |  
  47. Nallusamy, S., 2016. Analysis of mechanical properties on roselle fibre with polymer matrix reinforced composite. Adv. Eng. Forum, 16: 1-6.
    CrossRef  |  Direct Link  |  
  48. Nallusamy, S., 2016. Analysis of MRR and TWR on ohns die steel with different electrodes using electrical discharge machining. Int. J. Eng. Res. Afr., 22: 112-120.
    Direct Link  |  
  49. Nallusamy, S., 2016. A review on the effects of casting quality, microstructure and mechanical properties of cast Al-Si-0.3 Mg alloy. Int. J. Performability Eng., 12: 143-154.
    Direct Link  |  
  50. Nallusamy, S., 2016. A proposed model for sustaining quality assurance using TQM practices in small and medium scale industries. Int. J. Eng. Res. Afr., 22: 184-190.
    CrossRef  |  Direct Link  |  
  51. Nallusamy, S., 2016. A proposed model for lead time reduction during maintenance of public passenger transport vehicles. Int. J. Eng. Res. Afr. 23: 174-180.
    CrossRef  |  Direct Link  |  
  52. Nallusamy, S. and V. Saravanan, 2016. Lean tools execution in a small scale manufacturing industry for productivity improvement: A case study. Indian J. Sci. Technol., 9: 1-7.
    CrossRef  |  Direct Link  |  
  53. Nallusamy, S. and V. Saravanan, 2016. Enhancement of overall output in a small scale industry through VSM, line balancing and work standardization. Int. J. Eng. Res. Afr., 26: 176-183.
    Direct Link  |  
  54. Nallusamy, S. and S. Muthamizhmaran, 2016. Enhancement of productivity and overall equipment efficiency using time and motion study technique: A review. Adv. Eng. Forum, 14: 59-66.
    CrossRef  |  Direct Link  |  
  55. Nallusamy, S. and S. Kumar, 2016. Efficiency and lifespan enhancement of product with dissimilar material using different techniques. Indian J. Sci. Technol., 9: 1-5.
    CrossRef  |  Direct Link  |  
  56. Nallusamy, S. and P. Ambedkar, 2016. Analysis and ranking of critical supply chain risk factors in small and medium scale industries using QFD. Adv. Eng. Forum, 14: 67-75.
    CrossRef  |  Direct Link  |  
  57. Nallusamy, S. and N.M. Prabu, 2016. Synthesis and characterization of carbon nanofiber with reinforced polymer resin matrix composite. Nano Hybrids, 10: 20-27.
    CrossRef  |  Direct Link  |  
  58. Nallusamy, S. and N.M. Prabu, 2016. Design and development of a metal matrix composite for aeronautical applications: An assessment. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 148-155.
  59. Nallusamy, S. and G. Majumdar, 2016. Effect of stacking sequence and hybridization on mechanical properties of jute-glass fiber composites. Int. J. Performability Eng., 12: 229-239.
  60. Nallusamy, S. and A.M. Babu, 2016. X-ray differaction and FESEM analysis for mixture of hybrid nanoparticles in heat transfer applications. J. Nano Res., 37: 58-67.
    CrossRef  |  Direct Link  |  
  61. Nallusamy, S. and A. Karthikeyan, 2016. Analysis of wear resistance, cracks and frictional properties of metal matrix composites with SiC additives and Al2O3 as reinforcement. Indian J. Sci. Technol., 9: 1-6.
  62. Jha, S.K., S. Nallusamy and S.A. Diwakar, 2016. Future energy scenario in India: An essential overview. Pollut. Res., 35: 595-599.
  63. Jha, S.K., S. Nallusamy and A. Mathur, 2016. Enhancement of heat rejection rate in heat sink using phase change materials. Aust. J. Basic Appl. Sci., 10: 602-606.
  64. Jeevanantham, S., J.D. Rathnaraj, D.R. Smart, S. Nallusamy and N.M. Prabu, 2016. A study on characteristics of parameters influencing internal grinding process with MRR. Indian J. Sci. Technol., 9: 1-7.
    CrossRef  |  Direct Link  |  
  65. Balakannan, K., S. Nallusamy, P.S. Chakraborty and G. Majumdar, 2016. Performance evaluation of supply chain and logistics management system for efficiency enhancement of automotive industries in India. Indian J. Sci. Technol., 9: 1-9.
  66. Babu, A.M., S. Nallusamy and K. Rajan, 2016. Experimental analysis on vapour compression refrigeration system using nanolubricant with HFC-134a refrigerant. Nano Hybrids, 9: 33-43.
    CrossRef  |  Direct Link  |  
  67. Rekha, R.S., S. Nallusamy, R. Vijayakumar and S. Saravanan, 2015. Modeling and analysis of crank shaft with metal matrix composites. Int. J. Appl. Eng. Res., 10: 133-137.
  68. Rekha, R.S., S. Nallusamy and S. Manikandan, 2015. Design and analysis of external expansion collet with hydraulic movement. Int. J. Appl. Eng. Res., 10: 138-142.
  69. Prabu, N.M., S. Nallusamy and R.S. Rekha, 2015. A MICMAC and ISM for correlation analysis of supply chain intricacy drivers. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 48-54.
  70. Nallusamy, S., S. Satheesh, P.S. Chakraborty and K. Balakannan, 2015. A review on supplier selection problem in regular area of application. Int. J. Appl. Eng. Res., 10: 128-132.
  71. Nallusamy, S., R.S. Rekha, K. Balakannan, P.S. Chakraborty and G. Majumdar, 2015. A proposed agile based supply chain model for poultry based products in India. Int. J. Poult. Sci., 14: 57-62.
    CrossRef  |  Direct Link  |  
  72. Nallusamy, S., N.M. Prabu, K. Balakannan and G. Majumdar, 2015. Analysis of static stress in an alloy wheel of the passenger car. Int. J. Eng. Res. Afr., 16: 17-25.
  73. Nallusamy, S., K. Balakannan, R.S. Rekha and K. Balasubramanian, 2015. A review on valuable trends of product data management (PDM) occupied in new product development (NPD). Appl. Mech. Mater., 786: 262-268.
    CrossRef  |  Direct Link  |  
  74. Nallusamy, S., K. Balakannan and M.G. Chakraborty, 2015. Reliability analysis of passenger transport vehicles in public sector undertaking. Int. J. Appl. Eng. Res., 10: 843-850.
  75. Nallusamy, S., G.B. Dinagaraj, K. Balakannan and S. Satheesh, 2015. Sustainable green lean manufacturing practices in small scale industries: A case study. Int. J. Appl. Eng. Res., 10: 143-146.
  76. Nallusamy, S., 2015. Experimental analysis of emission characteristics using CNSL biodiesel in dual fuel mode. Pollut. Res., 34: 721-726.
  77. Nallusamy, S. and A.M. Babu, 2015. Investigation on carbon nanotubes over review on other heat transfer nano fluids. Int. J. Appl. Eng. Res., 10: 112-117.
  78. Dinagaraj, G.B., S. Nallusamy and R.S. Rekha, 2015. Threat reduction in logistics via real-time vehicle routing system using wireless technologies. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 9-19.
  79. Balakannan, K., S. Nallusamy, P.S. Chakraborty and G. Majumdar, 2015. Selection and evaluation of supplier by decision model of hybrid data envelopment analysis. Int. J. Appl. Eng. Res., 10: 123-127.
  80. Balakannan, K., S. Nallusamy and G. Majumdar, 2015. Hybrid DEA decision model for supplier evaluation and selection. Int. J. Res. Mech. Mechatron. Automobile Eng., 1: 39-47.
    Direct Link  |  
  81. Prabu, N.M., T.S. Kumar and S. Nallusamy, 2014. Effect of solvent ether (DEE) on internal combustion engine with J20 optimum characterized bio-diesel. Appl. Mech. Mater., 592: 1520-1525.
    CrossRef  |  Direct Link  |  
  82. Prabu, N.M., S. Nallusamy and K.T. Rasu, 2013. Experimental analysis of jatropha curcas bio-diesel for optimum blend characteristics. Bonfring Int. J. Ind. Eng. Manage. Sci., 3: 63-69.
  83. Charles, X., S.C. Parta and K.S. Nallusamy, 2013. Use of electrically heated metal catalytic converter in cold starting to reduce automotive emissions. Sci. Technol. Arts Res. J., 2: 147-152.
    CrossRef  |  Direct Link  |  
  84. Nallusamy, S., B. Sarkar, G. Majumdar and V. Anbalagan, 2008. Comparative analysis of performance of urban state transport undertakings in India. Res. Bull. Inst. Cost Works Accountants India, 31: 123-133.
  85. Nallusamy, S., B. Sarkar, G. Majumdar and V. Anbalagan, 2007. Critical analysis on maintenance systems for vehicles in state transport undertaking. Indian J. Transport Manage., 31: 35-54.
  86. Anbalagan, V., S. Nallusamy and P. Kumar, 2007. Performance evaluation of metropolitan transport corporations in India. Indian J. Transport Manage., 31: 103-121.
  87. Nallusamy, S., B. Sarkar, G. Majumdar and V. Anbalagan, 2006. Failure mode effect analysis for refurbished buses in state transport undertaking. Indian J. Transport Manage., 30: 205-222.