Dr. Hazizan Md. Akil
My Social Links

Dr. Hazizan Md. Akil

Professor
Universiti Sains Malaysia, Malaysia

Highest Degree
Ph.D. in Impact on Sandwich Structures from University of Liverpool, UK

Share this Profile

Area of Interest:

Chemistry
100%
Organic Chemistry
62%
Material Chemistry
90%
Natural Compounds
75%
Polymer composites
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
157
Abstracts
0

Selected Publications

  1. Al-Tayeb, M.M., B.H. Abu Bakar, H.M. Akil and H. Ismail, 2013. Performance of rubberized and hybrid rubberized concrete structures under static and impact load conditions. Exp. Mech., 53: 377-384.
    CrossRef  |  Direct Link  |  
  2. Zamri, M.H., H.M. Akil, A.A. Bakar, Z.A.M. Ishak and L.W. Cheng, 2012. Effect of Water Absorption on Pultruded Jute/Glass Fiber-Reinforced Unsaturated Polyester Hybrid Composites. J. Compos. Mater. 46: 51-61.
    CrossRef  |  Direct Link  |  
  3. Tan, C.Y. and H.M. Akil, 2012. Impact Response of Fiber Metal Laminate Sandwich Composite Structure with Polypropylene Honeycomb Core. Composites Part B, 43: 1433-1438.
    CrossRef  |  Direct Link  |  
  4. Saleh, S.S.M., H.M. Akil and M.H.A. Kudus, 2012. Synthesis and Characterization of MWCNT/CaCO3 Hybrid Compound. Adv. Mater. Res., 364: 460-464.
    CrossRef  |  Direct Link  |  
  5. Rahim, T.N.A.T., D. Mohamad, H.M. Akil, I. Ab Rahman, 2012. Water sorption characteristics of restorative dental composites immersed in acidic drinks. Dental Mater., 28: 63-70.
    CrossRef  |  PubMed  |  Direct Link  |  
  6. Omar, M.F., H.M. Akil, Z.A. Ahmad and S. Mahmud, 2012. The Effect of Loading Rates and Particle Geometry on Compressive Properties of Polypropylene/Zinc Oxide Nanocomposites: Experimental and Numerical Prediction. Polym. Compos., 33: 99-108.
    CrossRef  |  Direct Link  |  
  7. Omar, M.F., H.M. Akil and Z.A. Ahmad, 2012. Effect of Molecular Structures on Dynamic Compression Properties of Polyethylene. Mater. Sci. Eng., A, 538: 125-134.
    CrossRef  |  Direct Link  |  
  8. Nurashikin, S. and H. Akil, 2012. Preparation and Properties of Thermoplastic Honeycomb Core Sandwich Structure with Aluminum Skin. J. Compos. Mater. 46: 183-191.
    CrossRef  |  Direct Link  |  
  9. Mohd, F.A.R., M.A. Hazizan, J.M. Sharif, 2012. Influence of organo-clay on mechanical and thermal properties of O-muscovite/PP layered silicate nanocomposite. Adv. Mat. Res., 364: 174-180.
    CrossRef  |  Direct Link  |  
  10. Kudus, M.H.A., H.M. Akil and M.F.A. Rasyid, 2012. Muscovite-MWCNT Hybrid as a Potential Filler for Layered Silicate Nanocomposite. Mater. Lett., 79: 92-95.
    CrossRef  |  Direct Link  |  
  11. Kudus, M.H.A., H.M. Akil and M. Hasmaliza, 2012. Effect of Calcination and Reduction Process on MWCNT Growth during Synthesizing MWCNT-Alumina Hybrid as Composite Reinforcement. Adv. Mater. Res., 364: 475-479.
    CrossRef  |  Direct Link  |  
  12. Kakooei, S., H.M. Akil, M. Jamshidi and J. Rouhi, 2012. The effects of polypropylene fibers on the properties of reinforced concrete structures. Constr. Build. Mater., 27: 73-77.
    CrossRef  |  Direct Link  |  
  13. Kakooei, S., H.M. Akil, A. Dolati and J. Rouhi, 2012. The Corrosion Investigation of Rebar Embedded in the Fibers Reinforced Concrete. Constr. Build. Mater., 35: 564-570.
    CrossRef  |  Direct Link  |  
  14. Julkapli, N.M., H.M. Akil and Z. Ahmad, 2012. Thermal Properties of 4,4-Oxydiphathalic Anhydride Chitosan Filled Chitosan Bio-Composites. J. Therm. Anal. Calorim., 107: 365-376.
    CrossRef  |  Direct Link  |  
  15. Julkapli, N.M., H.M. Akil and Z. Ahmad, 2012. Evaluation of Cross-Linked Chitosan as Filler on Mechanical Properties of Chitosan-Based Bio-Composites. Polym. Plast. Technol. Eng., 51: 333-339.
    CrossRef  |  Direct Link  |  
  16. Al-Tayeb, M.M., B.H. Abu Bakar and H.M. Akil, 2012. Effect of Partial Replacements of Sand and Cement by Waste Rubber on the Fracture Characteristics of Concrete. Polym. Plast. Technol. Eng., 51: 583-589.
    CrossRef  |  Direct Link  |  
  17. Zamri, H., H.M. Akil, H.A. Shahidan, Z.A.M. Ishak and A. Abu-Bakar, 2011. Pultruded natural fibre reinforced composites: Preparation, properties and application. Proceeding of the 19th Annual International Conference on Composites or Nano Engineering, July 24-30, 2011, Shanghai, China -.
  18. Sawal, N. and H.M. Akil, 2011. Effect of Core Thicknesses on Impact Performance of Thermoplastic Honeycomb Core Sandwich Structure under Low-Velocity Impact Loading. Key Eng. Mater., 471-472: 461-465.
    CrossRef  |  Direct Link  |  
  19. Saleh, S.S., H. Akil and M.H.A. Kudus, 2011. Synthesis and haracterization of MWCNT/CACO3 hybrid compound. Proceeding of the International Conference for Nanomaterials Synthesis and Characterization, July 4-5, 2011, Seri Kembangan, Selangor -.
  20. Safiee, S., H.M. Akil, A.A.M. Mazuki, Z.A.M. Ishak and A.A. Bakar, 2011. Properties of Pultruded Jute Fiber Reinforced Unsaturated Polyester Composites. Adv. Compos. Mater., 20: 231-244.
    CrossRef  |  Direct Link  |  
  21. Rasyid, M.F.A., H.M. Akil and J.M. Sharif, 2011. Influence of organo-clay on mechanical and thermal properties of O-muscovite/PP layered silicate nanocomposite. Proceeding of the International Conference for Nanomaterials Synthesis and Characterization, July 4-5, 2011, Seri Kembangan, Selangor -.
  22. Rasyid, M.F.A., H.M. Akil and J.M. Sharif, 2011. Effect of Organic Modification of Muscovite on the Polypropylene Layered Silicate Nanocomposite. Key Eng. Mater., 472: 197-202.
    CrossRef  |  Direct Link  |  
  23. Rashid, E.S.A., M.F.A. Rasyid, H.Md. Akil, K. Ariffin and C.C. Kooi, 2011. Effect of (3-aminopropyl) triethylsilane treatment on mechanical and thermal properties of alumina-filled epoxy composites. J. Mat. Design Applic., 225: 160-169.
    CrossRef  |  Direct Link  |  
  24. Rashid, E.S.A., M.F.A. Rasyid, H.M. Akil, K. Ariffin and C.C. Kooi, 2011. Effect of Ion Exchange Treatment on the Properties of Muscovite Filled Epoxy Composite. Appl. Clay Sci., 52: 295-300.
    CrossRef  |  Direct Link  |  
  25. Rahim, T.N.A.T., D. Mohamad, A.R. Ismail and H.M. Akil, 2011. Synthesis of Nanosilica Fillers for Experimental Dental Nanocomposites and Their Characterisations. J. Phys. Sci., 22: 93-105.
    Direct Link  |  
  26. Othman, M.B.H., N.A.S. Ming, H.M. Akil and Z. Ahmad, 2011. Dependence of the Dielectric Constant on the Fluorine Content and Porosity of Polyimides. J. Appl. Polym. Sci., 121: 3192-3200.
    CrossRef  |  Direct Link  |  
  27. Othman, M.B.H., M.R. Ramli, L.Y. Tyng, Z. Ahmad and H.M. Akil, 2011. Dielectric Constant and Refractive Index of Poly (Siloxane-Imide) Block Copolymer. Mater. Des., 32: 3173-3182.
    CrossRef  |  Direct Link  |  
  28. Omer, M.F., M.A. Hazizan and Z.A. Ahmad, 2011. Effect of particle sizes on strain rate sensitivity and dynamic mechanical Properties of Polypropylene/Silica (PP/SiO2) nanocomposites. Proceeding of the International Conference for Nanomaterials Synthesis and Characterization, July 4-5, 2011, Seri Kembangan, Selangor -.
  29. Omar, M.F., H.M. Akil and Z.A. Ahmad, 2011. Static and Dynamic Compressive Properties of Mica/Polypropylene Composites. Mater. Sci. Eng., A, 528: 1567-1576.
    CrossRef  |  Direct Link  |  
  30. Omar, M.F., H.M. Akil and Z.A. Ahmad, 2011. Mechanical Properties of Nanosilica/Polypropylene Composites Under Dynamic Compression Loading. Polym. Compos., 32: 565-575.
    CrossRef  |  Direct Link  |  
  31. Omar, M.F., H.M. Akil and Z.A. Ahmad, 2011. Measurement and Prediction of Compressive Properties of Polymers at High Strain Rate Loading. Mater. Des., 32: 4207-4215.
    CrossRef  |  Direct Link  |  
  32. Omar, M.F., H.M. Akil and A.A. Zainal, 2011. Measurement on Strain Rate Sensitivity and Dynamic Mechanical Properties of Various Polymeric Materials. Key Eng. Mater., 471-472: 385-390.
    CrossRef  |  Direct Link  |  
  33. Nosbi, N., H.M. Akil, Z.A.M. Ishak and A.A. Bakar, 2011. Effect of water absorption on the mechanical properties of pultruded Kenaf fibre reinforced polyester composites. Adv. Composites Lett., 20: 21-26.
  34. Nosbi, N., H.M. Akil, Z.A.M. Ishak and A.A. Bakar, 2011. Behavior of Kenaf Fibers After Immersion in Several Water Conditions. Bioresour., 6: 950-960.
    Direct Link  |  
  35. Mohd, F.O., H.M. Akil and A.A. Zainal, 2011. Effect of Particle Sizes on Rate Sensitivity and Dynamic Mechanical Properties of Polypropylene/Silica (PP/Sio2) Nanocomposites. Adv. Mater. Res., 364: 181-185.
    CrossRef  |  Direct Link  |  
  36. Mazuki, A.A.M., H.M. Akil, S. Safiee, Z.A.M. Ishak and A.A. Bakar, 2011. Degradation of dynamic mechanical properties of pultruded kenaf fiber reinforced composites after immersion in various solutions. Compos. Part B: Eng., 42: 71-76.
    CrossRef  |  Direct Link  |  
  37. Lin, O.H., H.M. Akil and Z.A.M. Ishak, 2011. Surface-Activated Nanosilica Treated With Silane Coupling Agents/Polypropylene Composites: Mechanical, Morphological, and Thermal Studies. Polym. Compos., 32: 1568-1583.
    CrossRef  |  Direct Link  |  
  38. Kudus, M.H.A., H.M. Akil, H. Mohamad and L.E. Loon, 2011. Effect of Catalyst Calcination Temperature on the Synthesis of MWCNT-Alumina Hybrid Compound Using Methane Decomposition Method. J. Alloys Compd., 509: 2784-2788.
    CrossRef  |  Direct Link  |  
  39. Kudus, M.H.A., H.M. Akil and M. Hasmaliza, 2011. Synthesis of MWCNT-Alumina Hybrid as Composite Reinforcement Using Nickel Catalyst. Key Eng. Mater., 472: 596-600.
    CrossRef  |  Direct Link  |  
  40. Kudus, M.H.A., H.M. Akil and H. Mohamad, 2011. Effect of calcination and reduction process on MWCNT growth during synthesis MWCNT/alumina hybrid as composite reinforcement. Proceeding of the International Conference for Nanomaterials Synthesis and Characterization, July 4-5, 2011, Seri Kembangan, Selangor -.
  41. Kuan, H.T.N., W.J. Cantwell, M.A. Hazizan and C. Santulli, 2011. The Fracture Properties of Environmental-Friendly Fiber Metal Laminates. J. Reinf. Plast. Compos., 30: 499-508.
    CrossRef  |  Direct Link  |  
  42. Julkapli, N.M., Z. Ahmad and H.M. Akil, 2011. Mechanical Properties of 1,2,4,5-Benzene Tetra Carboxylic Chitosan-Filled Chitosan Biocomposites. J. Appl. Polym. Sci., 121: 111-126.
    CrossRef  |  Direct Link  |  
  43. Julkapli, N.M., Z. Ahmad and H.M. Akil, 2011. Effects of Different pH Medium on Swelling Properties of 1,2,4,5-Benzenetetracarboxylic-Chitosan-Filled Chitosan Bio-Composites. Polym. Bull., 67: 291-320.
    CrossRef  |  Direct Link  |  
  44. Julkapli, N.M., H.M. Akil and Z. Ahmad, 2011. Preparation, Properties and Applications of Chitosan-Based Biocomposites/Blend Materials: A Review. Compos. Interfaces, 18: 449-507.
    CrossRef  |  Direct Link  |  
  45. Firoozian, P., I.H. Bhat, H.P.S.A. Khalil, A.M. Noor, H.M. Akil and A.H. Bhat, 2011. High surface area activated carbon prepared from agricultural biomass: Empty Fruit Bunch (EFB), bamboo stem and coconut shells by chemical activation with H3PO4. Mater. Technol. Adv. Perform. Mater., 26: 222-228.
  46. Firoozian, P., H.P.S.A. Khalil, H.M. Akil and A.M. Noor, 2011. Influences and Properties of Various Activated Carbon and Carbon Black Filled in Epoxy Composite. Adv. Mater. Res., 264-265: 513-517.
    CrossRef  |  Direct Link  |  
  47. Chang, B.P., H.M. Akil, R.M. Nasir and S. Nurdijati, 2011. Mechanical and Antibacterial Properties of Treated and Untreated Zinc Oxide filled UHMWPE Composites. J. Thermoplast. Compos. Mater., 24: 653-667.
    CrossRef  |  Direct Link  |  
  48. Aziz, A.A., H.M. Akil, S.M.S. Jamaludin and N.A.M. Ramli, 2011. The Effect of Multiple Compatibilizers on the Impact Properties of Polypropylene/Polystyrene (PP/PS) Blend. Polym. Plast. Technol. Eng., 50: 768-775.
    CrossRef  |  Direct Link  |  
  49. Akil, H.M., M.F. Omar, A.A.M. Mazuki, S. Safiee, Z.A.M. Ishak and A.A. Bakar, 2011. Kenaf fiber reinforced composites: A review. Mater. Design, 32: 4107-4121.
    CrossRef  |  Direct Link  |  
  50. Akil, H.M. and C.Y. Tan, 2011. Comparative Study of Fiber Metal Laminates (FMLs) and Aluminum Skins for Polypropylene (PP) Honeycomb Core Sandwich Structure under Low Velocity Impact Loads. Key Eng. Mater., 471-472: 524-529.
    CrossRef  |  Direct Link  |  
  51. Affzan, M.H., H.M. Akil, Z.A.M. Ishak and A. Abu-Bakar, 2011. The effects of natural weathering exposure on the properties of pultrudednatural fibre reinforced unsaturated polyester composites. Proceedings of the 5th Asia-Europe Symposium on Processing and Properties of Reinforced Polymers, May 29-June 1, 2011, Dresden, Germany -.
  52. Adeli, H., S.H. Sharif Zein, S.H. Tan, H.M. Akil and A.L. Ahmad, 2011. Synthesis, characterization and biodegradation of novel poly(L-lactide)/multiwalled carbon nanotube porous scaffolds for tissue engineering applications. Curr. Nanosci., 7: 323-332.
    CrossRef  |  
  53. Yusoff, N.S.M., M.S.B. Ahmad, H.M. Akil, K.S. Ariffin and A. Ariffin, 2010. Contact Angle of Untreated/Treated Kaolin and Its Correlation with the Mechanical Properties of PP-Kaolin Composites. J. Reinf. Plast. Compos., 29: 3442-3449.
    CrossRef  |  Direct Link  |  
  54. Yen, K.S., M.M. Ratnam and H.M. Akil, 2010. Measurement of flexural modulus of polymeric foam with improved accuracy using moire method. Polymer Testing, 29: 358-368.
    CrossRef  |  Direct Link  |  
  55. Sawal, N., H. Akil and M.A.B. Abdul-Manap, 2010. Effect of temperature on thermoplastic honeycomb core sandwich structure under impact loading. Proceeding of the 4th World Engineering Congress, August 2-5, 2010, Kuching, Sarawak -.
  56. Safiee, S., H. Akil, A.A.M. Mazuki, Z.A.M. Ishak and A.A. Bakar, 2010. The effect of volume fraction on the mechanical properties of pultruded jute fibre reinforced unsaturated polyester (Pjfrc). Proceeding of the 4th World Engineering Congress, August 2-5, 2010, Kuching, Sarawak -.
  57. Ramezani, M., Z.M. Ripin, R. Ahmad, H.M. Akil and M. Damghani-Nouri, 2010. High strain-rate bulge forming of sheet metals using a solid bulging medium. J. Eng. Manuf., 224: 257-270.
    CrossRef  |  Direct Link  |  
  58. Omar, M.F., H.M. Akil, Z.A. Ahmad, A.A.M. Mazuki and T. Yokoyama, 2010. Dynamic properties of pultruded natural fibre reinforced composites using Split Hopkinson Pressure Bar technique. Mater. Design, 31: 4209-4218.
    CrossRef  |  Direct Link  |  
  59. Nosbi, N., H.M. Akil, Z.A.M. Ishak and A.A. Bakar, 2010. Degradation of compressive properties of pultruded kenaf fiber reinforced composites after immersion in various solutions. Mater. Design, 31: 4960-4964.
    CrossRef  |  Direct Link  |  
  60. Nosbi, N., H. Akil, Z.A.M Ishak and A.A. Bakar, 2010. The effect of thermal expension properties of pultruded kenaf fibre reinforced polyester composites after exposure to several environmental conditions. Proceeding of the 4th World Engineering Congress, August 2-5, 2010, Kuching, Sarawak -.
  61. Julkapli, N.M., Z. Ahmad and H.Md. Akil, 2010. X-ray diffraction studies of cross linked chitosan with different cross linking agents for waste water treatment application. AIP Conf. Proc., 1202: 106-111.
    CrossRef  |  Direct Link  |  
  62. Julkapli, N.M. and H.M. Akil, 2010. Thermal properties of kenaf-filled chitosan biocomposites. Polymer Plastics Technol. Eng., 49: 147-153.
    CrossRef  |  Direct Link  |  
  63. Julkapli, N.M. and H.M. Akil, 2010. Influence of a plasticizer on the mechanical properties of kenaf-filled chitosan bio-composites. Polymer Plastics Technol. Eng., 49: 944-951.
    CrossRef  |  Direct Link  |  
  64. Firoozian, P., H.M. Akil and H.P.S.A. Khalil, 2010. Prediction of Mechanical Properties of Mica-filled Epoxy Composite Using Various Mechanical Models. J. Reinf. Plast. Compos., 29: 2368-2378.
    CrossRef  |  Direct Link  |  
  65. Akil, H.Md., I.M.D. Rosa, C. Santulli and F. Sarasini, 2010. Flexural behaviour of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission. Mater. Sci. Engin. A, 527: 2942-2950.
    CrossRef  |  Direct Link  |  
  66. Akil, H.M., M.F. Omar and Z.A. Ahmad, 2010. Measurement of Dynamic Mechanical Properties of Nanosilica/ Polypropylene Composites using Split Hopkinson Pressure Bar Apparatus (SHPBA). J. Ind. Technol., 19: 31-40.
  67. Akil, H.M., L.W. Cheng, M.H. Affzan, A.A. Bakar and Z.A.M. Ishak, 2010. Water Absorption Study on Pultruded E-Glass Fibre Reinforced Unsaturated Polyester Composites. Adv. Compos. Lett., 19: 101-107.
    Direct Link  |  
  68. Akil, H., S. Sahnizam, M.I.Z. Arifin, A.B. Azhar and M.M.A. Akram, 2010. Study on dynamic mechanical properties of pultruded kenaf fiber reinforced composites. Proceedings of the 7th Asian-Australiasian Conference on Composite Materials, November 15-18, 2011 Taipei, Taiwan -.
  69. Akil, H., M.H. Affzan, L.W. Cheng, A.A. Bakar and Z.A.M. Ishak, 2010. Water absorption study on pultruded E-glass fibre reinforced unsaturated polyester composites. Proceeding of the 4th World Engineering Congress, August 2-5, 2010, Kuching, Sarawak -.
  70. Akil, H., L.W. Cheng, M.H. Zamri, A.A. Bakar and Z.A.M. Ishak, 2010. Water absorption study on pultruded jute/glass fibre reinforced unsaturated polyester hybrid composites. Proceeding of the 4th World Engineering Congress, August 2-5, 2010, Kuching, Sarawak -.
  71. Abdul Khalil, H.P.S., P. Firoozian, I.O. Bakare, H.M. Akil and A.M. Noor, 2010. Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal properties. Mater. Design, 31: 3419-3425.
    CrossRef  |  Direct Link  |  
  72. Zainol, I., H.M. Akil and A. Mastor, 2009. Effect of γ-irradiation on the physical and mechanical properties of chitosan powder. Mater. Sci. Eng. C, 29: 292-297.
    CrossRef  |  Direct Link  |  
  73. Tien, H., W.J. Cantwell and H.M. Akil, 2009. The mechanical properties of hybrid composites based on self-reinforced polypropylene. Malaysian Polymer J., 4: 71-80.
    Direct Link  |  
  74. Safiee, S., H. Akil, A.Ak.M. Mazuki, A.A. Bakar and Z.A.M. Ishak, 2009. Transverse and longitudinal (Α22, Α11) measurements of pultruded kenaf fibre reinforced unsaturated polyester and their impact on interfacial residual stresses in composites. Proceeding of the International Conference on Kenaf and Allied Fibres, December 1-3, 2009, Kuala Lumpur -.
  75. Safiee, S., A.A.M. Mazuki, H. Akil, A.A. Bakar and Z.A. MohdIshak, 2009. Influence of water absorption on Coefficient of the Thermal Expansion (CTE) of Pultruded Jute Fiber Reinforced Polyester Composite (PJFRPC). Proceeding of the 4th International Conference of Recent Advance in Materials, Minerals and Environment and 2nd Asia Symposium on Material and Processing, June 1-3, 2009, Batu Ferringhi, Penang -.
  76. Rashid, E.S.A., K. Ariffin, C.C. Kooi and H.M. Akil, 2009. Preparation and properties of POSS/epoxy composites for electronic packaging applications. Mater. Design, 30: 1-8.
    CrossRef  |  Direct Link  |  
  77. Nosbi, N., H. Akil, A.A. Bakar and Z.A.M. Ishak, 2009. Influence of water absorption on mechanical properties of pultruded kenaf fiber reinforced polyester composites. Proceeding of the 4th International Conference of Recent Advance in Materials, Minerals and Environment and 2nd Asia Symposium on Material and Processing, June 1-3, 2009, Batu Ferringhi, Penang -.
  78. Nor, M.A.A.M., H.M. Akil and Z.A. Ahmad, 2009. The effect of polymeric template density and solid loading on the properties of ceramic foam. Sci. Sintering, 41: 319-327.
    Direct Link  |  
  79. Mazuki, A.A.M., S. Safiee, H. Akil, A.A. Bakar and Z.A. MohdIshak, 2009. Study of water absorption behavior on pultruded jute fiber reinforced polyester composites using dynamic mechanical analysis. Proceeding of the 4th International Conference of Recent Advance in Materials, Minerals and Environment and 2nd Asia Symposium on Material and Processing, June 1-3, 2009, Batu Ferringhi, Penang -.
  80. Lin, O.H., Z.A.M. Ishak and H.M. Akil, 2009. Preparation and properties of nanosilica-filled polypropylene composites with PP-methyl Poss as compatibiliser. Mater. Design, 30: 748-751.
    CrossRef  |  Direct Link  |  
  81. Lin, O.H., M.H. Akil and S. Mahmud, 2009. Effect of particle morphology on the properties of polypropylene/nanometric zinc oxide (PP/nanoZnO) composites. Adv. Composites Lett., 18: 77-83.
    Direct Link  |  
  82. Lin, O.H., H.MD. Akil and Z.A.M. Ishak, 2009. Comparative study between PP-g-MAH and PP-methyl-POSS as compatibilizer for NanoSiO2/PP composites: Mechanical and morphological properties. Adv. Composites Lett., 18: 195-202.
    Direct Link  |  
  83. Lin, O.H., H. Md Akil and Z.A.M. Ishak, 2009. Characterization and properties of activated nanosilica/polypropylene composites with coupling agents. Polymer Composites, 30: 1693-1700.
    CrossRef  |  Direct Link  |  
  84. Kasim, S.R., Y.M. How, H. Seli, H.M. Akil and Z.A. Ahmad, 2009. The effect of calcium carbonate particle size on the formations β-tricalcium phospate. J. Ceramic Proc. Res., 10: 664-668.
    Direct Link  |  
  85. Hazizan, M.A., A.B. Azhar, Z.M.I. Arifin, A.M.M. Akram and S. Sahnizam, 2009. Study on properties of pultruded jute fibre reinforced unsaturated polyester composites for outdoor application. Proceeding of the International Conference on Kenaf and Allied Fibres, December 1-3, 2009, Kuala Lumpur -.
  86. Akil, H.M., L.W. Cheng, Z.A.M. Ishak, A.A. Bakar and M.A.A. Rahman, 2009. Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites. Compos. Sci. Technol., 69: 1942-1948.
    CrossRef  |  Direct Link  |  
  87. Akil, H., A.A. Bakar, Z. ArifinIshak, A.A. Mazuki and S. Safiee, 2009. Properties of pultruded jute and kenaf fiber reinforced unsaturated polyester composites. Proceedings of the Nato Workshop on Textile Composites, May 18-21, 2009, Kiev, Ukraine -.
  88. Teh, P.L., M., Mariatti, H.M. Akil, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh, 2008. Effect of ethanol as diluent on the properties of mineral silica filled epoxy composites. J. Composite Mater., 42: 129-142.
    CrossRef  |  Direct Link  |  
  89. Teh, P.L., M. Jaafar, H.M. Akil, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh, 2008. Thermal and mechanical properties of particulate fillers filled epoxy composites for electronic packaging application. Polymers Adv. Technol., 19: 308-315.
    CrossRef  |  Direct Link  |  
  90. Rashid, E.S.A., K. Ariffin, H.M. Akil and C.C. Kooi, 2008. Mechanical and thermal properties of polymer composites for electronic packaging application. J. Reinforced Plastics Composites, 27: 1573-1584.
    CrossRef  |  Direct Link  |  
  91. Othman, M.R., H.M. Akil and J. Kim, 2008. Carbonaceous Hibiscus cannabinus L. for treatment of oil- and metal-contaminated water. Biochem. Engin. J., 41: 171-174.
    CrossRef  |  Direct Link  |  
  92. Othman, M.R. and H.M. Akil, 2008. The CO2 adsorptive and regenerative behaviors of Rhizopus oligosporus and carbonaceous Hibiscus cannabinus exposed to thermal swings. Microporous Mesoporous Mater., 110: 363-369.
    CrossRef  |  Direct Link  |  
  93. Muhamad Nor, M.A.A., L.C. Hong, Z.A. Ahmad and H.M. Akil, 2008. Preparation and characterization of ceramic foam produced via polymeric foam replication method. J. Mater. Process. Technol., 207: 235-239.
    CrossRef  |  Direct Link  |  
  94. Man, S.H.C., A.S. Hashim and H.M. Akil, 2008. Studies on the curing behaviour and mechanical properties of styrene/methyl methacrylate grafted deproteinized natural rubber latex. J. Polymer Res., 15: 357-364.
    CrossRef  |  Direct Link  |  
  95. Man, S.H.C., A.S. Hashim and H.M. Akil, 2008. Properties of styrene-methyl methacrylate grafted DPNR latex at different monomer concentrations. J. Applied Polymer Sci., 109: 9-15.
    CrossRef  |  Direct Link  |  
  96. Julkapli, N.M., Z. Ahmad and H.M. Akil, 2008. Preparation and properties of kenaf dust-filled chitosan biocomposites. Composite Interfaces, 15: 851-866.
    CrossRef  |  Direct Link  |  
  97. Julkapli, N.M. and H.M. Akil, 2008. X-Ray Powder Diffraction (XRD) studies on kenaf dust filled chitosan bio-composites. AIP Conf. Proc., 989: 111-114.
    CrossRef  |  Direct Link  |  
  98. Julkapli, N.M. and H.M. Akil, 2008. Degradability of kenaf dust-filled chitosan biocomposites. Mater. Sci. Eng. C, 28: 1100-1111.
    CrossRef  |  Direct Link  |  
  99. Awang, M., H. Ismail and M.A. Hazizan, 2008. Processing and properties of polypropylene-latex modified waste tyre dust blends (PP/WTDML). Polymer Testing, 27: 93-99.
    CrossRef  |  Direct Link  |  
  100. Teh, P.L., M. Mariatti, H.M. Akil, C.K. Yeoh, K.N. Seetharamu, A.N.R. Wagiman and K.S. Beh, 2007. The properties of epoxy resin coated silica fillers composites. Mater. Lett., 61: 2156-2158.
    CrossRef  |  Direct Link  |  
  101. Razak, J.A., H.M. Akil and H. Ong, 2007. Effect of inorganic fillers on the flammability behavior of polypropylene composites. J. Thermoplastic Composite Mater., 20: 195-205.
    CrossRef  |  Direct Link  |  
  102. Rashid, E.S.A., H. Akil, K. Ariffin and C.C. Kooi, 2007. Study on flexural and thermal properties of mica filled epoxy composites. Proceedings of the 3rd Colloquium on Postgraduate Research, National Postgraduate Colloquium on Materials, Minerals and Polymers, April 10-11, 2007, Penang -.
  103. Rahman, M.A.A., N.M. Julkapli and H. Akil, 2007. Effect of acetylation treatment on the mechanical properties of kenaf fibres filled polyester bio-composites. Proceedings of the 3rd Colloquium on Postgraduate Research National Postgraduate Colloquium on Materials, Minerals And Polymers, April 10-11, 2007, Penang, Malaysia -.
  104. Man, S.H.C., A.S. Hashim and H. Akil, 2007. Styrene-methacrylate grafted dpnr latex at different monomer concentration: Effects on grafting efficiency and thermal properties. Proceedings of the 3rd Colloquium on Postgraduate Research, National Postgraduate Colloquium on Materials, Minerals and Polymers, April 10-11, 2007, Penang -.
  105. Luan, N.M., H. Akil, Z. Ahmad, H. Iwata and S.H. Hyon et al., 2007. Characterization of poly (L-Lactide acid/poly (E-caprolactone) copolymer for scaffold application. Proceedings of the 10th Asean University Network/South East Asia Engineering Education Development Network (AUN/SEED-Net) Field-Wise Seminar, June 5-6, 2007, Malaysia -.
  106. Lin, O.H., H. Akil and Z.A.M. Ishak, 2007. Comparative study on the properties of poss and nanosilica filled polypropylene composites. Proceedings of the 3rd Colloquium on Postgraduate Research, National Postgraduate Colloquium on Materials, Minerals and Polymers, April 10-11, 2007, Penang -.
  107. Leng, P.B., H.M. Akil and O.H. Lin, 2007. Thermal properties of microsilica and nanosilica filled polypropylene composite with epoxy as dispersing aid. J. Reinforced Plastics Composites, 26: 761-770.
    CrossRef  |  Direct Link  |  
  108. Julkapli, N.M. and H. Akil, 2007. Degradability of kenaf dust-filled chitosan biocomposites. Proceedings of the 3rd Colloquium on Postgraduate Research, National Postgraduate Colloquium on Materials, Minerals and Polymers, April 10-11, 2007, Penang -.
  109. Firoozian, P. and H. Akil, 2007. Modeling the tensile properties of mica filled epoxy composites. Proceedings of the 3rd Colloquium on Postgraduate Research, National Postgraduate Colloquium On Materials, Minerals and Polymers, April 10-11, 2007, Penang -.
  110. Edeerozey, A.M.M., H.M. Akil, A.B. Azhar and M.I.Z. Ariffin, 2007. Chemical modification of kenaf fibers. Mater. Lett., 61: 2023-2025.
    CrossRef  |  Direct Link  |  
  111. Awang, M., H. Ismail and M.A. Hazizan, 2007. Polypropylene-based blends containing waste tire dust: Effects of trans-polyoctylene rubber (TOR) and dynamic vulcanization. Polymer Testing, 26: 779-787.
    CrossRef  |  Direct Link  |  
  112. Teh, P.L., M. Mariatti, H.M. Akil, K.N. Seetharamu and A.N.R. Wagiman, 2006. Improved tg of mineral silica filled epoxy composites. Proceedings of the 6th National Symposium on Polymeric Materials, December 13-14, 2006, Subang Jaya, Malaysia -.
  113. Rashid, E.S.A., H.M. Aki, K. Ariffin and C.C. Kooi, 2006. The Flexural and Morphological Properties of α-Alumina Filled Epoxy Composites. Malaysian Polym. J., 1: 25-38.
    Direct Link  |  
  114. Rashid, E.S.A., H. Akil, K. Ariffin and C.C. Kooi, 2006. Thermal properties of mica filled epoxy composites. Proceedings of the 6th National Symposium on Polymeric Materials, December 13-14, 2006, Subang Jaya, Malaysia -.
  115. Man, S.H.C., A.S. Hashim and H. Akil, 2006. Preparation and characterization of Styrene-Methyl Methacrylate In Deproteinised Natural Rubber Latex (SMMA-DPNR). Proceedings of the 6th National Symposium on Polymeric Materials, December 13-14, 2006, Subang Jaya, Malaysia -.
  116. Lin, O.H., H. Akil and Z.A.M. Ishak, 2006. Compatibilisation effect of pp-g-mah and pp-poss on sio2/pp nanocomposites: Mechanical and morphological properties. Proceedings of the 6th National Symposium on Polymeric Materials, December 13-14, 2006, Subang Jaya, Malaysia -.
  117. Kasim, S.R., H. Akil and Z.A. Ahmad, 2006. Influence of sintering additives and sintering temperature in fabrication dense hydroxyapatite. Proceedings of the 15th Scientific Conference on Electron Microscopy, December 4-6, 2006, Kuala Terengganu -.
  118. Ismail, H., M. Awang and M.A. Hazizan, 2006. Effect of waste tire dust (WTD) size on the mechanical and morphological properties of polypropylene/waste tire dust (PP/WTD) blends. Polymer Plastics Technol. Eng., 45: 463-468.
    CrossRef  |  Direct Link  |  
  119. Awang, M., H. Ismail and M.A. Hazizan, 2006. Polypropylene/waste tire dust (PP/WTD) blends with trans-polyontene rubber. Proceedings of the 6th National Symposium on Polymeric Materials, December 13-14, 2006, Subang Jaya, Malaysia -.
  120. Akil, H.M., N. Lily, J.A. Razak, H. Ong and Z.A. Ahmad, 2006. Effect of various coupling agents on properties of Alumina-filled pp composites. J. Reinforced Plastics Composit., 25: 745-759.
    CrossRef  |  Direct Link  |  
  121. Akil, H., M.A.A. Rahman, N. Julkipli, A.A. Bakar and Z.A.M. Ishak, 2006. Effect of various chemical modifications on properties of kenaf fibre filled epoxy composites. Proceedings of the 15th Scientific Conference on Electron Microscopy, Dicember 4-6, 2006, Kuala Terengganu -.
  122. Akil, H., F. Zainuddin and S. Ahmad, 2006. Deformation and energy absorption characterization of polymeric foam from uniaxial compression test. Proceedings of the 6th National Symposium on Polymeric Materials, December 13-14, 2006, Subang Jaya, Malaysia -.
  123. Teh, P.L., M. Mariatti, S.M. Noor, H.M. Akil and A.N.R. Wagiman et al., 2005. Thermal properties of strain properties of fused silica and glass powder filled epoxy resin. Proceedings of the 21st Century COE International Symposium on Global Renaissance by Green Energy Revolution, August 8-9, 2005, Penang -.
  124. Teh, P.L., M. Mariatti, H.M. Akil, K.N. Seetharamub and A.N.R Wagiman et al., 2005. Thermal expansion and flexural properties of particulate fillers filled epoxy composites. Proceedings of the National Symposium on Polymeric Materials, August 23-25, 2005, UKM, Malaysia -.
  125. Rejab, M.R.M., A. Alias, H. Akil, Y.S. Ismail and K. Arjuman, 2005. Testing and evaluation of polymeric foams. Proceedings of the National Seminar on Computational and Experimental Mechanics, May 17-18, 2005, UKM, Malaysia -.
  126. Rejab, M.R.M., A. Alias and H. Akil, 2005. Experimental studies on polymeric structural foam properties. Proceedings of the International Advanced Technology Congress, December 6-8, 2005, Putrajaya -.
  127. Mariatti, M., A.Y. Amir, H. M. Akil, A.N.R. Wagiman and K.S. Beh, 2005. Low CTE high flexural laminatedwoven glass fabric and silica filled thermoset composites for substrate materials in electronic packaging application. Malaysia J. Microscopy, 2: 108-115.
  128. Halimatuddahliana, H.I. and H.M. Akil, 2005. The effects of trans-polyoctene rubber and dynamic vulcanization on properties of PP/EPDM/NR blends. Prog. Rubber, Plastics Recycling Technol., 21: 39-53.
    Direct Link  |  
  129. Halimatuddahliana, H.I. and H.M. Akil, 2005. The effects of dynamic vulcanization by Dicumyl peroxide (DCP) and N,N-m-phenylene bismaleimide (HVA-2) on the properties of polypropylene (PP)/ethylene-propylene diene terpolymer (EPDM)/natural rubber (NR) blends. Polymer Plastics Technol. Eng., 44: 1217-1234.
    CrossRef  |  Direct Link  |  
  130. Halimatuddahliana, H.I. and H.M. Akil, 2005. The effect of dicumyl peroxide vulcanization on the properties and morphology of polypropylene/ethylene-propylene diene terpolymer/natural rubber blends. Int. J. Polymeric Mater., 54: 1169-1183.
    CrossRef  |  Direct Link  |  
  131. Halimatuddahliana, H.I. and H.M. Akil, 2005. The Effect of HVA-2 Addition on the Properties of PP-EPDM-NR Ternary Blends. J. Elastomers Plast., 37: 55-72.
    CrossRef  |  Direct Link  |  
  132. Halimatuddahliana, H.I. and H.M. Akil, 2005. Flow behavior of polypropylene/ethylene-propylene diene terpolymer/natural rubber (PP/EPDM/NR) blends by torque rheometer: The effect of N,N-m-Phenylene bismaleimide (HVA-2) addition. Polymer Plastics Technol. Eng., 44: 1429-1442.
    CrossRef  |  Direct Link  |  
  133. Awang, M., H. Ismail and M.A. Hazizan, 2005. The influence of HVA-2 and dynamic vulcanization on properties of polypropylene/waste tire dust (PP/WTD) blends. Malaysian J. Microsc., 2: 79-85.
  134. Awang, M., H. Ismail and M.A. Hazizan, 2005. Properties of thermoplastic elastomers based on Polypropylene and waste tire dust (pp/wtd) blends. Proceedings of the National Symposium On Polymeric Materials, August 23-25, 2005, Malaysia -.
  135. Awang, M., H. Ismail and M.A. Hazizan, 2005. Properties of thermoplastic elastomers based on Poly Propylene and Waste Tire Dust (PP/WTD) blends. Proceedings of the Brunei International Conference on Engineering and Technology, August 18-15, 2005, August 15-18, 2005, Brunei-.
  136. Ahmadi, A.H., M. Al-Amin Muhamad Noor, H.M. Akil and Z.A. Ahmad, 2005. Ceramic foam as a core material in sandwich structure construction. J. Phys. Sci., 17: 19-32.
  137. Teh, P.L., M. Jaafar, H.M. Akil, K.N. Seetharamu and A.N.R. Wagiman et al., 2004. Thermal properties of fused silica and glass powder filled epoxy resin. Proceedings of the 6th International Conference on Electronic Materials and Packaging, December 5-7, 2004, Penang, Malaysia -.
  138. Rizal, K.S., M.N. Fahmi, H.M. Akil and A.Z. Arifin, 2004. The synthesis of hydroxyapatite through the precipitation method. Med. J. Malaysia, 59: 75-76.
    PubMed  |  
  139. Rizal, K.S., H. Akil and Z.A. Ahmad, 2004. Preparation of dense hydroxyapatite via gel casting method: A preliminary study. Proceedings of the International Conference on X-Ray Related Techniques in Research and Industry, September 15-16, 2004, Penang -.
  140. Rizal, K.S., H. Akil and Z.A. Ahmad, 2004. Microstructure study of dense hydroxyapatite fabricated via gel casting method. Proceedings of the 14th Scientific Conference on Electron Microscopy, December 13-15, Kuala Lumpur -.
  141. Noor, A.A., Z.A. Ahmad and H. Akil, 2004. Effect of solid loading on the porous ceramic produced via polymer foam replication process. Proceedings of the 14th Scientific Conference On Electron Microscopy, December 13-15, 2004, Kuala Lumpur -.
  142. Mohamad, M.G. and H.M. Akil, 2004. Evaluation on the effect of various silane treatments on nanosilica filled PP composites. Proceedings of the 14th Scientific Conference on Electron Microscopy, December 13-15, 2004, Kuala Lumpur -.
  143. Hazizan, M.A., N. Lily, J.A. Razak and A.Z. Arifin, 2004. Effect of various coupling agents on the properties of alumina-filled pp composites. Proceedings of the 4th International Conference on Materials Technology and Exhibition, March 23-25, 2004, Kuala Lumpur -.
  144. Hazizan, M.A. and W.J. Cantwell, 2004. The impact response of foam-based sandwich structures. Adv. Technol. Mat. Proces. J., 6: 276-285.
  145. Hazizan, A., H. Kiratisaevee, G. Reyes-Villanueva and W.J. Cantwell, 2004. The impact response of an aluminium honeycomb and aluminium foam sandwich structure. Proceedings of the 4th International Materials Technology Conference and Exhibition, March 23-25, 2004, Kuala Lumpur -.
  146. Halimatuddahliana, H.I. and H.M. Akil, 2004. Properties and morphology of PP/EPDM/NR ternary blend: The effect of peroxide vulcanization. Proceedings of the National Postgraduate Colloquium, December 8-9, 2004, Penang -.
  147. Halimatuddahliana, H.I. and H.M. Akil, 2004. Effects of dynamic vulcanization and/or n,n,-m- phenylene bismaleimide (hva-2) addition on thermal properties of pp/epdm/nr blends. Proceedings of the 14th Scientific Conference on Electron Microscopy, December 13-15, 2004, Kuala Lumpur -.
  148. Halimatuddahliana, H.I. and H.M. Akil, 2004. Effects of dynamic vulcanization and trans-Poly Octenylene Rubber (TOR) on the rheological properties of pp/epdm/nr blend by torque rheometer. Proceedings of the National Postgraduate Colloquium, December 8-9, 2004, Penang -.
  149. Halimatuddahliana, H. Ismail and H. Akil, 2004. Thermal properties of PP/EPDM/NR blends: The effect of HVA-2 addition. Proceedings of the Regional Conference for Young Chemist, April 13-14, 2004, Penang -.
  150. Halimatuddahliana, H. Ismail and H. Akil, 2004. Studies on the effects of Trans-Polyoctylene Rubber (TOR) addition and dynamic vulcanization on the properties of pp/epdm/nr ternary blends. Proceedings of the 4th International Materials Technology Conference and Exhibition, March 23-25, 2004, Kuala Lumpur -.
  151. Halimatuddahliana, H. Ismail and H. Akil, 2004. Properties of PP/EPDM/NR blends: The effect of dynamic vulcanization. Proceedings of the Regional Conference for Young Chemist, April 13-14, 2004, Penang -.
  152. Halimatuddahliana, H. Ismail and H. Akil, 2004. Morphological studies of PP/EPDM/NR blend: The effect of dynamic vulcanization and/or Trans-Polyoctenylene Rubber (TOR) addition. Proceedings of the 14th Scientific Conference on Electron Microscopy, December 13-15, 2004, Kuala Lumpur -.
  153. Akil, H., J.A. Razak and Z.A. Ahmad, 2004. The effect of stearic acid addition on the properties of alumina-filled polypropylene. Proceedings of the 2nd Regional Meeting on Regional Network Formation for Enhancing Research and Education on Materials Engineering, August 10-11, 2004, Thailand -.
  154. Alias, A., H. Akil and R.M. Rejab, 2003. Polymeric foam as the core for side door impact beams. Proceedings of the 3rd International Conference on Advances in Strategic Technologies, Auguest 12-14, 2003, Malaysia, pp: 387-394.
  155. Akil, H., Z.A. Ahmad, B. Johar, A. Alias and A.A. Bakar, 2003. Preliminary study on the mechanical properties of alumina-filled PP. Proceedings of the 3rd International Conference on Recent Advances in Materials, Minerals And Environment, October 20-22, 2003, Penang, Malaysia, pp: 279-284.
  156. Akil Hazizan, M. and W.J. Cantwell, 2003. The low velocity impact response of an aluminium honeycomb sandwich structure. Composites Part B: Engin., 34: 669-687.
    CrossRef  |  Direct Link  |  
  157. Hazizan, M.A. and W.J. Cantwell, 2002. The low velocity impact response of foam-based sandwich structures. Compos. Part B: Eng., 33: 193-204.
    CrossRef  |  Direct Link  |