Dr. Hussain H. Al-Kayiem
My Social Links

Dr. Hussain H. Al-Kayiem

Associate Professor
Universiti Teknologi Petronas, Malaysia

Highest Degree
Ph.D. in Mechanical Engineering from University of Bradford, United Kingdom

Share this Profile

Biography

Dr. Hussain H. Al-Kayiem holds a position of Associate Professor at Universiti Teknologi PETRONAS, Malaysia. He earned his Ph.D. in Mechanical Engineering from University of Bradford, United Kingdom. He is having 35 years teaching experience. Previously he was appointed as Missile Engineer/Engineering Officer at Ministry of Defense-Iraq, Lecturer in ME Department Military College of Engineering - Ministry of Defense-Iraq, Assistant Professor and Head of Department at Al-Mustansirya University, Baghdad, Iraq, and Director of NEDECO - Iraq branch at Netherlands Engineering Consultant. His main area of interest focuses on Renewable Energies, Thermo-Fluids, Multi-Phase Flows, Enhanced Heat Transfer, FSI, CFD. He graduated more than 32 PhD and MSc student. Currently he is supervising 24 post graduate students. He is also serving as head or member of more than (80) Examination Committees of postgraduate students (PHD & MSC) in many Universities in Iraq and Malaysia. He is editor for International Journal of Energy Production and Management, UK. Dr. Hussain received honors includes winner of Energy and Environment INNOVA2010 special award + Gold Medal, winner of Energy and Environment INNOVA2010 special award + Gold Medal, and winner of 8 gold medals in ITEX, MTE, and special award in EINIX. He is professional member of ASME, SPE, Energy Institute-UK, Iraqi Engineers Union, and SECOP-PETRONAS. He has published 3 books, 14 chapters in books, and 107 research articles in journals contributed as author/co-author.

Area of Interest:

Physical Science Engineering
100%
Renewable Energy
62%
Mechanical Engineering
90%
Solar Energy
75%
Fluid Dynamics
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
107
Abstracts
0

Selected Publications

  1. Mohmmed, A.O., M.S. Nasif, H.H. Al-Kayiem and Z.I. Al-Hashimy, 2016. Numerical study on fluid structure interaction of slug flow in a horizontal pipeline. Applied Mech. Mater., 819: 319-325.
    Direct Link  |  
  2. Ali, B.H., S.I. Gilani and H.H. Al-Kayiem, 2016. Mathematical modeling of a developed central receiver based on evacuated solar tubes. MATEC Web Conf., Vol. 38. 10.1051/matecconf/20163802005.
    CrossRef  |  Direct Link  |  
  3. Albarody, T.M.B., H.H. Al-Kayiem and W. Faris, 2016. The transverse shear deformation behaviour of magneto-electro-elastic shell. J. Mech. Sci. Technol., 30: 77-87.
    CrossRef  |  Direct Link  |  
  4. Al-Kayiem, H.H., 2016. Hybrid techniques to enhance solar thermal: The way forward. Int. J. Energy Prod. Manage., 1: 50-60.
    Direct Link  |  
  5. Al-Kayiem, H.H. and O.C. Aja, 2016. Historic and recent progress in solar chimney power plant enhancing technologies. Renew. Sustain. Energy Rev., 58: 1269-1292.
    CrossRef  |  
  6. Al-Hashimy, Z.I., H.H. Al-Kayiem, M.S. Nasif and A.O. Mohmmed, 2016. Numerical simulation of the transient development of slug flow in horizontal pipes. Applied Mech. Mater., 819: 300-304.
    CrossRef  |  Direct Link  |  
  7. Yassen, T.A. and H.H. Al-Kayiem, 2015. Solar-biomass hybrid dryer enhanced by the Co-Gen technique. Drying Technol. Int. J., 34: 287-295.
    CrossRef  |  Direct Link  |  
  8. Soh, B.P., W. Pao and H.H. Al-Kayiem, 2015. Numerical analyses for improved hydrodynamics of deep water torpedo anchor. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 100. 10.1088/1757-899X/100/1/012059.
    CrossRef  |  Direct Link  |  
  9. Osei, H., H.H. Al-Kayiem and F.M. Hashim, 2015. Numerical studies on the separation performance of liquid- liquid Hydrocyclone for higher water-cut wells. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 100. 10.1088/1757-899X/100/1/012014.
    CrossRef  |  Direct Link  |  
  10. Nor, M.A.M., H.H. Al-Kayiem and T.A. Lemma, 2015. Numerical analysis of cocurrent conical and cylindrical axial cyclone separators. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 100. .
    Direct Link  |  
  11. Mustafa, A., H.H. Al-Kayiem and S. Gilani, 2015. A review of convective and artificial vortices for power generation. Int. J. Sustain. Dev. Plan., 10: 650-665.
    Direct Link  |  
  12. Jamil, I.E. and H.H. Al-Kayiem, 2015. Simulation analysis of the oil/water structure in the downhole with presence of hydrocyclone separator. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 100. 10.1088/1757-899X/100/1/012025.
    CrossRef  |  Direct Link  |  
  13. Bhayo, B.A., H.H. Al-Kayiem and N.Z. Yahaya, 2015. Performance investigation of the S-rotors. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 100. 10.1088/1757-899X/100/1/012043.
    CrossRef  |  Direct Link  |  
  14. Al-Wakeel, H.B., Z.A. Abdul Karim and H.H. Al-Kayiem, 2015. Optimizing electro-thermo Helds for soot oxidation using microwave heating and metal. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 78. 10.1088/1757-899X/78/1/012018.
    CrossRef  |  Direct Link  |  
  15. Al-Wakeel, H.B., Z.A. Abdul Karim and H.H. Al-Kayiem, 2015. A technique for localized rapid soot oxidation using metal aided microwave radiation. IEEE Trans. Microwave Theory Tech., 64: 37-43.
    CrossRef  |  Direct Link  |  
  16. Al-Kayiem, H.H., C.A. Brebbia and S.S. Zubir, 2015. Energy and Sustainability V: Special Contributions (Wit Transactions on Ecology and the Environment). WIT Press, UK., ISBN-13: 978-1-78466-095-6, Pages: 380.
  17. Al-Kayiem, H.H. and Y.M. Heng, 2015. Experimental investigation of rooftop solar chimney for natural ventilation. ARPN J. Eng. Applied Sci., 10: 10249-10254.
    Direct Link  |  
  18. Al-Kayiem, H.H. and T.A. Yassen, 2015. On the natural convection heat transfer in a rectangular passage solar air heater. Solar Energy, 112: 310-318.
    CrossRef  |  Direct Link  |  
  19. Al-Kayiem, A.H.H. and M.A. Ibrahim, 2015. The influence of the equivalent hydraulic diameter on the pressure drop prediction of annular test section. IOP Conf. Ser.: Mater. Sci. Eng., Vol. 100. .
    Direct Link  |  
  20. Al-Hashimy, Z.I., H.H. Al-Kayiem, Z.K. Kadhim and A.O. Mohmmed, 2015. Numerical simulation and pressure drop prediction of slug flow in oil/gas pipelines. WIT Trans. Eng. Sci., 89: 57-66.
  21. Yin, K.Y., H.H. Al-Kayiem and W. Pao, 2014. Numerical study of water control with downhole oil-water separation technology. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141302029.
    CrossRef  |  Direct Link  |  
  22. Yassen, T.A., H.H. Al-Kayiem and K. Habib, 2014. Evaluation of hybrid solar-Biomass dryer with no load. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141306007.
    CrossRef  |  Direct Link  |  
  23. Shoushtari, M.A., S. Irawan, H.H. Al-Kayiem, L.P. Wen and K.W. Choong, 2014. Novel approach for heat transfer characterization in EOR steam injection wells. Res. J. Applied Sci. Eng. Technol., 7: 2345-2352.
    Direct Link  |  
  24. Osei, H., H.H. Al-Kayiem and F.B.M. Hashim, 2014. Theoretical background and the flow fields in downhole liquid-liquid hydrocyclone (LLHC). MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141302032.
    CrossRef  |  Direct Link  |  
  25. Mustafa, A.T., H.H. Al-Kayiem and S.I.U. Gilani, 2014. A survey on performance enhancement of solar updraft tower power plants. Int. J. Eng. Tech. Res., 2: 34-39.
  26. Mokhlif, N.D., H.H. Al-Kayiem and M.B. Baharom, 2014. Experimental analysis of petroleum wax characteristics for lubricant oil production in solvent dewaxing unit. Adv. Mater. Res., 875-877: 529-533.
    CrossRef  |  Direct Link  |  
  27. Mohmmed, A.O., H.H. Al-Kayiem, M.S. Nasif and Z.I. Mohammed, 2014. Finite element analysis of fatigue in pipelines due to slug flow. Adv. Mater. Res., 845: 271-276.
    CrossRef  |  Direct Link  |  
  28. Lin, S.C. and H.H. Al-Kayiem, 2014. Thermal reliability of paraffin wax phase change material for thermal energy storage. Applied Mech. Mater., 699: 263-268.
    Direct Link  |  
  29. Lim, C.C., H.H. Al-Kayiem and C.Y. Sing, 2014. Portable thermoelectric power generator coupled with phase change material. MATEC Web Conf. Vol. 13. 10.1051/matecconf/20141302028.
    CrossRef  |  Direct Link  |  
  30. Kadhim, S.K., M.S. Nasif, H.H. Al-Kayiem, N. Thirumalaiswany and R.A. Waked, 2014. Effect of induced vibration on the blood flow properties in a mechanical aortic valve. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141302022.
    CrossRef  |  Direct Link  |  
  31. Hassan, S., H.H. Al-Kayiem and A. Ghaffari, 2014. Development of thermal insulation from oil palm fiber for chimney of fire tube steam packaged boiler. Applied Mech. Mater., 666: 31-35.
    CrossRef  |  Direct Link  |  
  32. Gamil, A., S.I. U. Gilani and H.H. Al-Kayiem, 2014. Design and simulation of small heliostat field at universiti teknologi PETRONAS campus. Applied Mech. Mater., 699: 613-618.
    CrossRef  |  Direct Link  |  
  33. Alnaimi, F.B.I., M.A. Ali, H.H. Al-Kayiem and K.S.B.M. Sahari, 2014. On-line condition monitoring system for high level trip water in steam boiler's drum. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141303011.
    CrossRef  |  Direct Link  |  
  34. Ali, B.H., S.I. Gilani and H.H. Al-Kayiem, 2014. Investigation of evacuated tube collector performance at high temperature mode using TRNSYS simulation model. Applied Mech. Mater., 465-466: 155-160.
    CrossRef  |  Direct Link  |  
  35. Ali, B.H., S.I. Gilani and H.H. Al-Kayiem, 2014. A three dimensional performance analysis of a developed evacuated tube collector using a CFD fluent solar load model. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141306011.
    CrossRef  |  Direct Link  |  
  36. Al-Wakeel, H.B., Z.A.B. Abdul Kareem, H.H. Al-Kayiem and H. Fuad, 2014. Numerical simulation of high frequency electromagnetic wave in microwave cavity for soot oxidation. Applied Mech. Mater., 459: 310-318.
    CrossRef  |  Direct Link  |  
  37. Al-Wakeel, H.B., Z.A. Abdul Karim and H.H. Al-Kayiem, 2014. Numerical simulation of microwave heating for soot oxidation. Applied Mech. Mater., 564: 256-262.
    Direct Link  |  
  38. Al-Wakeel, H.B., Z.A. Abdul Karim and H.H. Al-Kayiem, 2014. Electric field prediction using micro-plasma inside a microwave cavity for soot oxidation. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141304012.
    CrossRef  |  Direct Link  |  
  39. Al-Kayiem, H.H., N.D. Mokhlif and M.B. Baharom, 2014. New method for viscosity estimation of waxy lube oil/MEK-toluene solvent composition. J. Applied Sci., 14: 3276-3281.
    CrossRef  |  
  40. Al-Kayiem, H.H., K.V. Sreejaya and S.I.U.H. Gilani, 2014. Mathematical analysis of the influence of the chimney height and collector area on the performance of a roof top solar chimney. Energy Build., 68: 305-311.
    CrossRef  |  Direct Link  |  
  41. Al-Kayiem, H.H., H. Osei, K.Y. Yin and F.M. Hashim, 2014. A Comparative Study on the Hydrodynamics of Liquid-Liquid Hydrocyclonic Separation. In: Advances in Fluid Mechanics X, Brebbia, C.A., S. Hernandez and M. Rahman (Eds.). WIT Press, UK., ISBN: 9781845647902, pp: 361-370.
  42. Al-Kayiem, H.H., F.B.I. Al-Naimi and W.N.B.W. Amat, 2014. Analysis of boiler operational variables prior to tube leakage fault by artificial intelligent system. MATEC Web Conf., Vol. 13. 10.1051/matecconf/20141305004.
    CrossRef  |  Direct Link  |  
  43. Al-Kayiem, H.H., C.A. Brebbia and S.S. Zubir, 2014. Energy and Sustainability V (Wit Transactions on Ecology and the Environment). WIT Press, UK., ISBN-13: 978-1-84564-837-4, Pages: 924.
  44. Al-Kayiem, H.H., A.K. Hussein, J.M. Jalil and S.H. Hussain, 2014. Numerical computation of 3-dimensional supersonic flow field over seamless missiles. Indian J. Sci. Technol., 7: 1563-1572.
    CrossRef  |  Direct Link  |  
  45. Al-Kayiem, H.H. and S.C. Lin, 2014. Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations. Solar Energy, 109: 82-92.
    CrossRef  |  Direct Link  |  
  46. Al-Kayiem, H.H. and L.N. Al-Habeeb, 2014. Ribbed Double Pipe Heat Exchanger: Experimental Analysis. In: Heat Transfer XIII: Simulation and Experiments in Heat and Mass Transfer, Sunden, B. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN: 9781845647940, pp: 3-13.
  47. Al-Hashimy, Z.I., H.H. Al-Kayiem, F. Hasan and A.O. Mohmmed, 2014. Effect of various fluid densities on vibration characteristics in variable cross-section pipes. J. Applied Sci., 14: 2054-2060.
    CrossRef  |  
  48. Aja, O.C. and H.H. Al-Kayiem, 2014. Review of municipal solid waste management options in Malaysia, with an emphasis on sustainable waste-to-energy options. J. Mater. Cycles Waste Manage., 16: 693-710.
    CrossRef  |  Direct Link  |  
  49. Afolabi, L.O., H.H. Al-Kayiem, A.T. Baheta and S.C. Lin, 2014. Experimental investigation of thermal conductivity of paraffin based nanocomposite for TES. Applied Mech. Mater., 465-466: 181-185.
    CrossRef  |  Direct Link  |  
  50. Yunus, Y.M. and H.H. Al-Kayiem, 2013. Simulation of hybrid solar dryer. IOP Conf. Ser.: Earth Environ. Sci., Vol. 16. 10.1088/1755-1315/16/1/012143.
    CrossRef  |  Direct Link  |  
  51. Yassen, T.A., H.H. Al-Kayiem, M.H. Khalaf and N.D. Dhamin, 2013. Analytical analysis of thermal energy storage performance of room heating system by solar energy. Asian J. Scientific Res., 6: 135-145.
    CrossRef  |  Direct Link  |  
  52. Yassen, T.A., H.H. Al-Kayiem and K. Habib, 2013. Design and Performance Investigation of a Thermal Back-up System for Hybrid Drying. In: The Sustainable City VIII (2 Volume Set): Urban Regeneration and Sustainability, Zubir, S.S. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN:9781845647469, pp: 921-931.
  53. Sing, C.Y., M.S. Aris and H.H. Al-Kayiem, 2013. Experimental investigations on the characteristics of biomass and coal-biomass fuel briquettes. Adv. Mater. Res., 683: 246-249.
    CrossRef  |  Direct Link  |  
  54. Saw, C.L., H.H. Al-Kayiem and A.L. Owolabi, 2013. Experimental Investigation on the Effect of PCM and Nano-enhanced PCM of Integrated Solar Collector Performance. In: The Sustainable City VIII (2 Volume Set): Urban Regeneration and Sustainability, Zubir, S.S. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN:9781845647469, pp: 899-909.
  55. Mustafa, A.T., H.H. Al-Kayiem and S.I.U. Gilani, 2013. A Review of the Vortex Engine. In: The Sustainable City VIII (2 Volume Set): Urban Regeneration and Sustainability, Zubir, S.S. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN:9781845647469, pp: 911-920.
  56. Islamuddin, A., H.H. Al-Kayiem and S.I. Gilani, 2013. Simulation of solar chimney power plant with an external heat source. IOP Conf. Ser.: Earth Environ. Sci., Vol. 16. 10.1088/1755-1315/16/1/012080.
    CrossRef  |  Direct Link  |  
  57. Hassan, S., L.S. Kee and H.H. Al-Kayiem, 2013. Experimental study of palm oil mill effluent and oil palm frond waste mixture as an alternative biomass fuel. J. Eng. Sci. Technol., 8: 703-712.
    Direct Link  |  
  58. Gamil, A.M., S.I. Gilani and H.H. Al-Kayiem, 2013. Simulation and evaluation of small scale solar power tower performance under Malaysia weather conditions. IOP Conf. Ser.: Earth Environ. Sci., Vol. 16. 10.1088/1755-1315/16/1/012031.
    CrossRef  |  Direct Link  |  
  59. Badri, T.M., H.H. Al-Kayiem and M.B. Taufiq, 2013. The Theory of Functional and Adaptive Shell Structures: A Compendium. LAP LAMBERT Academic Publishing, Germany, ISBN-13: 978-3846521755, Pages: 212.
  60. Badri, T.M. and H.H. Al-Kayiem, 2013. Analytical solution for simply supported and multilayered magneto-thermo-electro-elastic plates. Asian J. Scient. Res., 6: 236-244.
    CrossRef  |  Direct Link  |  
  61. Azeemuddin, H.H. Al-Kayiem and S.I. Gilani, 2013. Simulation of a Collector using Waste Heat Energy in a Solar Chimney Power Plant System. In: The Sustainable City VIII (2 Volume Set): Urban Regeneration and Sustainability, Zubir, S.S. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN:9781845647469, pp: 933-944.
  62. Albarody, T.M.B. and H.H. Al-Kayiem, 2013. Laminated Smart Shell Structures: Theory and Analysis. In: Shell Structures: Theory and Applications, Volume 3, Pietraszkiewicz, W. ans J. Gorski (Eds.). CRC Press, USA., ISBN:9781138000827, pp: 49-52.
  63. Al-Turaihi, R.S., A.K. Hussein, H.H. Al-Kayiem and H.A. Mohammed, 2013. Experimental investigation of various solid particle materials on the steady state gassolid fluidized bed system. J. Basic Applied Scient. Res., 3: 293-304.
    Direct Link  |  
  64. Al-Kayiem, H.H., S.C,. Lin and A. Lukmon, 2013. Review on nanomaterials for thermal energy storage technologies. Nanosci. Nanotechnol. Asia, 3: 60-71.
    Direct Link  |  
  65. Al-Kayiem, H.H., A.K. Hussein and T.S. Peow, 2013. Investigations of natural convective heat transfer in rectangular thermal passages. Int. J. Mech. Sci. Eng., 7: 452-457.
    Direct Link  |  
  66. Al-Kayiem, H.H., A.K. Al-Taie and W.T. Dong, 2013. Analysis on gas turbine blade cooling by compressed air channels using CFD simulation. Asian J. Scient. Res., 6: 467-477.
    CrossRef  |  Direct Link  |  
  67. Al-Kayiem, H.H., 2013. Energy Sustainability Through Integrated Solar Thermal Systems. In: The Sustainable City VIII (2 Volume Set): Urban Regeneration and Sustainability, Zubir, S.S. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN:9781845647469, pp: 887-897.
  68. Al-Kayiem, H.H. and I.E. Abdul Jamil, 2013. Theoretical modeling of pseudo hydrostatic force in solid-liquid pipe flow with two layers. Pertanika J. Sci. Technol., 21: 521-532.
    Direct Link  |  
  69. Aja, O.C., H.H. Al-Kayiem and Z.A. Abdul Karim, 2013. Experimental Investigation of the Effect of Wind Speed and Wind Direction on a Solar Chimney Power Plant. In: The Sustainable City VIII (2 Volume Set): Urban Regeneration and Sustainability, Zubir, S.S. and C.A. Brebbia (Eds.). WIT Press, UK., ISBN:9781845647469, pp: 945-955.
  70. Aja, O.C., H.H. Al-Kayiem and Z.A. Abdul Karim, 2013. Analytical investigation of collector optimum tilt angle at low latitude. J. Renew. Sustain. Energy, Vol. 5. 10.1063/1.4829434.
    CrossRef  |  Direct Link  |  
  71. Thamer, I. and H.H. Al-Kayiem, 2012. Experimental characterization of diesel engine performance fuelled by various sunflower oil-diesel mixtures. J. Applied Sci., 12: 2604-2609.
    Direct Link  |  
  72. Shoushtari, M.A. and H.H. Al-Kayiem, 2012. Synergistic evaluation of production tubing heat losses and integrity of oil well. J. Applied Sci., 12: 2484-2488.
    Direct Link  |  
  73. Mukhlif, N.D., H.H. Al-Kayiem and M.B. Baharom, 2012. Estimation model for the wax crystal size distribution in solvent dewaxing process. J. Applied Sci., 12: 2548-2554.
  74. Lin, S.C., H.H. Al-Kayiem and M.S.B. Aris, 2012. Experimental investigation on the performance of integrated PCM-flat plate solar collector. J. Applied Sci., 12: 2390-2396.
  75. Jalil, J.M., H.H. Al-Kayiem and A.K. Hussein, 2012. Three Dimensional Simulation of Supersonic Flow over Missiles of Different Shapes. Eng. Technol. J., 30: 325-343.
    Direct Link  |  
  76. Badri, T.M. and H.H. Al-Kayiem, 2012. Free Vibration Analysis of Structronics Shell. In: Trends in Intelligent Robotics, Automation and Manufacturing, Ponnambalam, S.G., J. Parkkinen and K.C. Ramanathan (Eds.). Springer-Verlag, Berlin, ISBN: 978-3-642-35196-9, pp: 322-330.
  77. Badri, T.M. and H.H. Al-Kayiem, 2012. Dynamic responses of magneto-thermo-elastic shell structure with closed-circuit surface condition. J. Applied Sci., 12: 2541-2547.
  78. Al-Wakeel, H.B., Z.A.A. Karim, H.H. Al-Kayiem and M. Jamlus, 2012. Soot reduction strategy: A review. J. Applied Sci., 12: 2338-2345.
  79. Al-Kayiem, H.H., T.W. Salih and D. Govindasamy, 2012. Coupled analytical-numerical procedure to solve the double wedge spiked supersonic intake flow Applied Mech. Mater., 225: 67-72.
    CrossRef  |  Direct Link  |  
  80. Al-Kayiem, H.H., C.Y. Sing and K.Y. Yin, 2012. Numerical Simulation of Solar Chimney Integrated with Exhaust of Thermal Power Plant. In: Advanced Computational Methods and Experiments in Heat Transfer XII, Sunden, B., C.A. Brebbia and D. Poljak (Eds.). WIT Press, UK., ISBN: 9781845646028, pp: 61-79.
  81. Al-Kayiem, H.H. and T.M. Badri, 2012. Transient Analysis of Structronics Shell. In: Trends in Intelligent Robotics, Automation and Manufacturing, Ponnambalam, S.G., J. Parkkinen and K.C. Ramanathan (Eds.). Springer-Verlag, Berlin, ISBN: 978-3-642-35196-9, pp: 313-321.
  82. Al-Kayiem, H.H. and T.F. Hon, 2012. CFD simulation of the intermediate passage of gas turbine with energy promoters. J. Applied Sci., 12: 2511-2518.
    Direct Link  |  
  83. Al-Kayiem, H.H. and M.H. Alhamdo, 2012. Thermal behavior of encapsulated phase change material energy storage. J. Renewable Sustainable Energy, Vol. 4. 10.1063/1.3683532.
    CrossRef  |  Direct Link  |  
  84. Yunus, Y.M., H.H. Al-Kayiem, K.A.K. Albaharin, 2011. Design of a biomass burner/gas-to-gas heat exchanger for thermal backup of a solar dryer. J. Applied Sci., 11: 1929-1936.
    CrossRef  |  Direct Link  |  
  85. Sreejaya, K.V., H.H. Al-Kayiem and S.I.U.H. Gilani, 2011. Analytical analysis of roof top solar chimney for power generation. J. Appl. Sci., 11: 1741-1748.
    CrossRef  |  Direct Link  |  
  86. Mokhlif, N.D. and H.H. Al-kayiem, 2011. Modeling of the waxing-dewaxing process in scraped surface exchangers. J. Applied Sci., 11: 1594-1599.
    CrossRef  |  Direct Link  |  
  87. Eltilib, R.A.E.E., H.H. Al-Kayiem and A. Jaafar, 2011. Investigation on the particle settling velocity in non-newtonian fluids. J. Applied Sci., 11: 1528-1535.
    CrossRef  |  Direct Link  |  
  88. Chikere, A.O., H.H. Al-Kayiem and Z.A.A. Karim, 2011. Review on the enhancement techniques and introduction of an alternate enhancement technique of solar chimney power plant. J. Applied Sci., 11: 1877-1884.
    CrossRef  |  Direct Link  |  
  89. Badri, T.M. and H.H. Al-Kayiem, 2011. Numerical analysis of thermal and elastic stresses in thick pressure vessels for cryogenic hydrogen storage apparatus. J. Applied Sci., 11: 1756-1762.
    CrossRef  |  Direct Link  |  
  90. Alnaimi, F.B.I. and H.H. AL-Kayiem, 2011. Artificial intelligent system for steam boiler diagnosis based on superheater monitoring. J. Applied Sci., 11: 1566-1572.
    CrossRef  |  Direct Link  |  
  91. Al-Kayiem, H.H., T.W. Salih and A.S.A. Al-Ambari, 2011. Performance prediction procedures of the supersonic spiked intakes. Asian J. Scientific Res., 4: 224-235.
    CrossRef  |  Direct Link  |  
  92. Al-Kayiem, H.H. and M.F. El-Rahman, 2011. Ribbed Double Pipe Heat Exchanger: Analytical Analysis. J. Eng. Sci. Technol., 6: 39-49.
    Direct Link  |  
  93. Al-Kayiem, H.H. and G.J. Ming, 2011. Experimental investigation of S-rotors in open and bounded flows. World Acad. Sci. Eng. Technol., 60: 144-149.
  94. Al-Kayiem, H.H. and A.K. Kartigesh, 2011. An Investigation on the Aerodynamic Characteristics of 2-D Airfiol in Ground Collision. J. Eng. Sci. Technol., 6: 369-381.
    Direct Link  |  
  95. Al-Kayiem, H.H. and A.H. Ghanizadeh, 2011. Analysis of the temperature distribution in GT blade cooled by compressed air. J. Applied Sci., 11: 1733-1740.
    CrossRef  |  Direct Link  |  
  96. Al-Kayiem, H.H., N.M. Zaki, M.Z. Asyraf and M.E. Elfeel, 2010. Simulation of the cuttings cleaning during the drilling operation. Am. J. Applied Sci., 7: 800-806.
    CrossRef  |  Direct Link  |  
  97. Al-Kayiem, H.H., M.F.B.M. Sidik and Y.R.A.L. Munusammy, 2010. Study on the thermal accumulation and distribution inside a parked car cabin. Am. J. Applied Sci., 7: 784-789.
    CrossRef  |  Direct Link  |  
  98. Al-Kayiem, H.H. and H.A.A. Mahdi, 2010. Performance enhancement of rotary air pre-heater by the use of pin shaped turbulators. WIT Trans. Eng. Sci., 68: 35-49.
  99. Ibrahim, M.A. and H.H. Al-Kayiem, 2009. Prediction of Pressure Drop Correction to Suit Wax Deposition Modeling in Annular Test Section. PETRONAS Technol. J., 2: 46-52.
    Direct Link  |  
  100. Al-Kayiem, H.H., M.G. How and L.L. Seow, 2009. Experimental investigation on Solar-Flue gas chimney. J. Energy Power Eng., 3: 25-31.
    Direct Link  |  
  101. Al-Kayiem, H.H. and T.W. Salih, 2008. Combined effect of incidence-forbody angles on the flow structure inside spiked supersonic intakes. Proceedings of the 13th International conference of Applied Mechanics and Mechanical Engineering, May 27-29, Cairo, Egypt, pp: 1280-1292.
  102. Al-Kayiem, H.H. and A.S. Sahi, 2007. Flow analysis in spiked supersonic intakes of A/C (I-Invicid). Proceedings of AEROTECH-II, Conference on Aerospace Technology of XXI Century, June 20-21, Kuala Lumpur, Malaysia..
  103. Al-Kayiem, H.H. and H.H. Bruun, 1991. Evaluation of a flying X hot-wire probe system. Meas. Sci. Technol., 2: 374-380.
    Direct Link  |  
  104. Bruun, H.H., N. Nabhani, H.H. Al-Kayiem, A.A. Fardad, M.A. Khan and E. Hogarth, 1990. Calibration and analysis of X hot-wire probe signals. Meas. Sci. Technol., 1: 782-782.
  105. Bruun, H.H., N. Nabhani, A.A. Fardad and H.H. Al-Kayiem, 1990. Velocity component measurements by X hot-wire anemometry. Meas. Sci. Technol., 1: 1314-1321.
  106. Al-Kayiem, H.H., A.J. Day and H.H. Bruun, 1989. A computer aided manufacturing procedure for 2-dimensional experimental aerofoil. J. Aerospace Eng., 203: 139-144.
  107. Bruun, H.H., M.A. Khan, H.H. Al-Kayiem and A.A. Ferdad, 1988. Velocity calibration relationship for hot-wire anemometry. J. Phys. E.: Sci. Instrum., 21: 225-232.
    CrossRef  |