Dr. Muhammad  Abdul Mujeebu
My Social Links

Dr. Muhammad Abdul Mujeebu

Associate Professor
Imam Abdulrahman Bin Faisal University, Saudi Arabia


Highest Degree
Postdoctorate in Combustion in Porous Media from Universiti Sains Malaysia, Malaysia

Share this Profile

Biography

Dr. Muhammad Abdul Mujeebu holds a position of Associate Professor at College of Architecture and Planning Department of Building Engineering University of Dammam Kingdom of Saudi Arabia. He has completed his Post doctorate in Combustion in Porous Media from Universiti Sains Malaysia, Malaysia. He is Founder and Chief Editor in International Journal of Advanced Thermofluid Research, Founder and Chairman in International Research Establishment for Energy and Environment. Previously he was appointed as Project Supervisor at Ajssir Constructions, Alwaye Kerala, S, India, Production Engineer at Nafee Electronics, Bangalore, India, Production Engineer at HHYS Group of Concerns, Kerala, S, India, Lecturer, Senior Lecturer, Assistant Professor, and Professor at Visvesvaraya Technological University, Belgaum, Research Officer at School of Mechanical Engineering, Universiti Sains Malaysia, Penang, Malaysia. His main area of research interest focuses on Combustion in Porous Media, Green Buildings, Energy and Thermal Performance of Buildings, Indoor Air Quality, Building Sustainability, Industrial Cogeneration (CHP) and Trigeneration (CCHP), Energy efficient Refrigeration Systems, Energy from Waste, Absorption Refrigeration System, Micro Combustors & MEMS, Electronic Cooling & Packaging, CFD analysis of Energy Systems, IC Engines and Combustion, Heat Pipes for CPU cooling, Composite Materials, Nanotechnology, Reforms in Science and Technology Education, Curriculum Development, and effective Teaching and Learning. He is also serving as reviewer for 26 journals and associate editor for 7 journals. He also nominated in Marquis Who’s Who in the World 2015, 2014, 2013, 2011 editions. He supervised 4 student’s projects and 5 students currently in his supervision. He also completed 2 research projects as co-investigator. He has published 63 research articles in journals, 3 book chapters and 22 conference proceeding contributed as author/co-author. He is member of International Association of Engineers, Indian Society for Technical Education, American Chemical Society, and IAENG Society of Mechanical Engineering.

Area of Interest:

Physical Science Engineering
100%
Porous Media Combustion
62%
Green Buildings
90%
Indoor Air Quality
75%
Building Sustainability
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
0
Abstracts
0

Selected Publications

  1. Yusoff, H., M.Z. Abdullah, K.A. Ahmad and M. Abdul Mujeebu, 2015. Effect of skin flexibility on aerodynamic performance of flexible skin flapping wings for micro air vehicles. Exp. Tech., 39: 11-20.
  2. Malico, I. and M.A. Mujeebu, 2015. Potential of porous media combustion technology for household applications. Int. J. Adv. Thermofluids Res., 1: 50-69.
    Direct Link  |  
  3. Alshamrani, O. and M. Abdul Mujeebu, 2015. Effects of shading strategy and orientation on energy performance of school building. J. Archit. Plann., 28: 129-141.
  4. Abdul Mujeebu, M. and O.S. Alshamrani, 2015. A review of solar energy exploration and utilization in Saudi buildings. Int. J. Adv. Thermofluid Res., 1: 70-85.
  5. Lau, C., Abdullah, M.Z., M. Abdul Mujeebu and N. Yusop, 2014. Finite element analysis on the effect of solder joint geometry for the reliability of ball grid array assembly with flexible and rigid PCBs. J. Eng. Sci. Technol. School Eng. Taylor's Univ., 9: 47-63.
  6. Khaleed, H.M.T., M.F. Addas, M.A. Mujeebu, A.A. Al-Rashed and I.A. Badruddin et al., 2014. Flash-less cold forging of cup-shaped object and stress analysis of forging die using FEM simulation and experiment. Aust. J. Basic Applied Sci., 8: 401-410.
    Direct Link  |  
  7. Yusoff, H., M.Z. Abdullah, M.A. Mujeebu and K.A. Ahmad, 2013. Development of flexible wings and flapping mechanism with integrated electronic control system, for micro air vehicle research. Exp. Tech., 37: 25-37.
    CrossRef  |  Direct Link  |  
  8. Tan, H.T., M.Z. Abdullah and M.A. Mujeebu, 2013. Effects of geometry and number of hollow on the performance of rectangular fins in microchannel heat sinks. J. Therm. Sci. Technol., 33: 1-9.
    Direct Link  |  
  9. Ramdan, D., C.Y. Khor, A. Mujeebu, M.Z. Abdullah, W.K. Loh and C.K. Ooi, 2013. FSI analysis of wire sweep in encapsulation process of plastic ball grid array packaging. J. Therm. Sci. Technol., 33: 101-109.
    Direct Link  |  
  10. Mujeebu, M.A., M.Z. Abdullah and M. Zuber, 2013. Experiment and simulation to develop clean porous medium surface combustor using LPG. J. Therm. Sci. Technol., 33: 55-61.
    Direct Link  |  
  11. Khaleed, H.M.T., Z. Samad, M.A. Mujeebu and A.B. Abdullah, 2013. Flash-less cold forging of AUV propeller blade: Work-piece optimization and thermal analysis. Arabian J. Sci. Eng., 38: 2509-2519.
    CrossRef  |  Direct Link  |  
  12. Elnaggar, M.H., M.Z. Abdullah and M.A. Mujeebu, 2013. Experimental investigation and optimization of heat input and coolant velocity of finned twin U‐shaped heat pipe for CPU cooling. Exp. Tech., 37: 34-40.
    CrossRef  |  Direct Link  |  
  13. Shaker, S.F., M.Z. Abdullah, M.A. Mujeebu, K.A. Ahmad and M.K. Abdullah, 2012. Study on the effect of number of film cooling rows on the thermal performance of gas turbine blade. J. Therm. Sci. Technol., 32: 89-98.
    Direct Link  |  
  14. Rehman, M., M. Abdul Mujeebu, Y.S. Cheng and A.A.A. Aish, 2012. Design and development of a microcontroller based human response measurement system. Exp. Tech., 36: 62-70.
  15. Rehman, M., M. Abdul Mujeebu, T.B. Kheng and B.A.J.A. Abu Izneid, 2012. A microprocessor-based novel instrument for temperature and thermal conductivity measurements. Exp. Tech., 36: 62-70.
    CrossRef  |  Direct Link  |  
  16. Ramdan, D., Z.M. Abdullah, M.A. Mujeebu, W.K. Loh, C.K. Ooi and R.C. Ooi, 2012. FSI simulation of wire sweep PBGA encapsulation process considering rheology effect. IEEE Trans. Compon. Packag. Manuf. Technol., 2: 593-603.
    CrossRef  |  Direct Link  |  
  17. Mujeebu, M.A., M.Z. Abdullah and M.R. Arshad, 2012. Numerical study on hydrodynamic performance of shallow underwater glider platform. Int. J. Geo-Mar. Sci., 41: 124-133.
    Direct Link  |  
  18. Leong, W.C., M.Z. Abdullah and M.A. Mujeebu, 2012. Flow induced deflection and stress on flexible printed circuit board in fan-cooled electronic systems: FSI approach. IEEE Trans. Compon. Packag. Manuf. Technol., 2: 617-624.
    CrossRef  |  Direct Link  |  
  19. Khor, C.Y., M.Z. Abdullah and M. Abdul Mujeebu, 2012. Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates. J. Electron. Packag., Vol. 134. 10.1115/1.4005914.
    CrossRef  |  Direct Link  |  
  20. Elnaggar, M.H., M.Z. Abdullah and M.A. Mujeebu, 2012. Characterization of working fluid in vertically mounted finned U-shape twin heat pipe for electronic cooling. Energy Convers. Manage., 62: 31-39.
    CrossRef  |  Direct Link  |  
  21. Abdullah, M.K., N.C. Ismail, M.Z. Abdullah, M.A. Mujeebu, K.A. Ahmad and Z.M. Ripin, 2012. Effects of tip gap and amplitude of piezoelectric fans on the performance of heat sinks in microelectronic cooling. Heat Mass Transfer, 48: 893-901.
    CrossRef  |  Direct Link  |  
  22. Abdullah, M.K., N.C. Ismail, M.A. Mujeebu, M.Z. Abdullah, K.A. Ahmad, M. Husaini and M.N.A. Hamid, 2012. Optimum tip gap and orientation of multi-piezofan for heat transfer enhancement of finned heat sink in microelectronic cooling. Int. J. Heat Mass Transfer, 55: 5514-5525.
    CrossRef  |  Direct Link  |  
  23. Abdullah, M.K., B.H. Murni, M.Z. Abdullah, M.A. Mujeebu and F. Hussin et al., 2012. Heat transfer enhancement using piezoelectric fan in electronic cooling-experimental and numerical observations. J. Therm. Sci. Technol., 32: 41-49.
  24. Rajeswari, M.S.R., K.A.M. Azizli, S.F.S. Hashim, M.K. Abdullah, M.A. Mujeebu and M.Z. Abdullah, 2011. CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill. Int. J. Mineral Process., 98: 94-105.
    CrossRef  |  Direct Link  |  
  25. Naik, P., M. Ibrahim, A. Surendranathan and M. Mujeebu, 2011. Development and characterization of carbon-carbon composite for aircraft brake pad using preformed yarn method. World J. Eng., 8: 259-266.
    CrossRef  |  Direct Link  |  
  26. Mujeebu, M.A., M.Z. Abdullah, M.Z.A. Bakar and A.A. Mohamad, 2011. A mesoscale premixed LPG burner with surface combustion in porous ceramic foam. Energy Sources Part A Recovery Util. Environ. Effects, 34: 9-18.
    CrossRef  |  Direct Link  |  
  27. Mujeebu, M.A., M.Z. Abdullah, M.A. Bakar and A.A. Mohamad, 2011. Development of premixed burner based on stabilized combustion within discrete porous medium. J. Porous Media, 14: 909-917.
    CrossRef  |  Direct Link  |  
  28. Mujeebu, M.A., M.Z. Abdullah and S. Ashok, 2011. Husk-fueled steam turbine cogeneration for a rice mill with power export: A case study. Energy Sources Part A Recovery Util. Environ. Effects, 33: 724-734.
    CrossRef  |  Direct Link  |  
  29. Mujeebu, M.A., M.Z. Abdullah and A.A. Mohamad, 2011. Development of energy efficient porous medium burners on surface and submerged combustion modes. Energy, 36: 5132-5139.
    CrossRef  |  Direct Link  |  
  30. Muhad, R.M.N., M.Z. Abdullah, M.A. Mujeebu, M.A. Bakar, R. Zakaria and A.A. Mohamad, 2011. The development and performance analysis of partially premixed LPG porous medium combustor. Energy Sources Part A Recovery Util. Environ. Effects, 33: 1260-1270.
    CrossRef  |  Direct Link  |  
  31. Khor, C.Y., M.Z. Abdullah, M.K. Abdullah, M.A. Mujeebu and D. Ramdan et al., 2011. Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process. Int. J. Heat Mass Transfer, 54: 1861-1870.
    CrossRef  |  Direct Link  |  
  32. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu, A.B. Abdullah and M.M. Zihad, 2011. Work-piece optimization and thermal analysis for flash-less cold forging of AUV propeller hubs-FEM simulation and experiment. J. Manuf. Processes, 13: 41-49.
    CrossRef  |  
  33. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu and A. Badarudin et al., 2011. Computer-Aided FE simulation for flashless cold forging of connecting rod without underfilling. Arabian J. Sci. Eng., 36: 855-865.
    CrossRef  |  
  34. Elnaggar, M.H., M.Z. Abdullah and M.A. Mujeebu, 2011. Experimental analysis and FEM simulation of finned U-shape multi heat pipe for desktop PC cooling. Energy Convers. Manage., 52: 2937-2944.
    CrossRef  |  Direct Link  |  
  35. Abdullah, M.Z., M.A. Mujeebu, H. Gitano, Y. Yaakob and M.K. Abdullah et al., 2011. Transient natural convection in a rectangular cavity filled with porous medium heated discretely at vertical wall. J. Eng. Sci., 7: 1-13.
    Direct Link  |  
  36. Mujeebu, M.A., M.Z. Abdullah, A.A. Mohamad and M.A. Bakar, 2010. Trends in modeling of porous media combustion. Prog. Energy Combust. Sci., 36: 627-650.
    CrossRef  |  Direct Link  |  
  37. Muhad, R.M.N., M.Z. Abdullah, A.A. Mohamad, M.A. Mujeebu, M.A. Bakar and R. Zakaria, 2010. 3-D numerical modeling and experimental investigation of a partial premix-type porous medium burner using liquefied petroleum gas fuel. J. Porous Media, 13: 655-669.
    CrossRef  |  Direct Link  |  
  38. Khor, C.Y., Z.M. Ariff, F.C. Ani, M.A. Mujeebu, M.K. Abdullah, M.Z. Abdullah and M.A. Joseph, 2010. Three-dimensional numerical and experimental investigations on polymer rheology in meso-scale injection molding. Int. Commun. Heat Mass Transfer, 37: 131-139.
    CrossRef  |  Direct Link  |  
  39. Khor, C.Y., M.Z. Abdullah, M.A. Mujeebu and F.C. Ani, 2010. FVM based numerical study on the effect of solder bump arrangement on capillary driven flip chip underfill process. Int. Commun. Heat Mass Transfer, 37: 281-286.
    CrossRef  |  
  40. Khor, C.Y., M.K. Abdullah, M.Z. Abdullah, M.A. Mujeebu, D. Ramdan, M.F.M.A. Majid and Z.M. Ariff, 2010. Effect of vertical stacking dies on flow behavior of epoxy molding compound during encapsulation of stacked-chip scale packages. Heat Mass Transfer, 46: 1315-1325.
    CrossRef  |  Direct Link  |  
  41. Khor, C.Y., M.A. Mujeebu, M.Z. Abdullah and F.C. Ani, 2010. Finite volume based CFD simulation of pressurized flip-chip underfill encapsulation process. Microelectron. Reliab., 50: 98-105.
    CrossRef  |  Direct Link  |  
  42. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu and M.R. Arshad et al., 2010. Finite element analysis and experimental validation of flashless cold forging of propeller hubs and blade of autonomous underwater vehicle. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 224: 1455-1467.
    CrossRef  |  Direct Link  |  
  43. Abdullah, M.K., M.Z. Abdullah, M.A. Mujeebu, Z.M. Ariff and K.A. Ahmad, 2010. Three-dimensional modelling to study the effect of die-stacking shape on mould filling during encapsulation of microelectronic chips. IEEE Trans. Adv. Packag., 33: 438-446.
    CrossRef  |  Direct Link  |  
  44. Abdullah, M.K., M.Z. Abdullah, M.A. Mujeebu, H. Gitano, Z.M. Ariff, R. Razali and K.A. Ahmad, 2010. Three-dimensional modeling of mold filling in microchip encapsulation process with a matrix-array arrangement. J. Electron. Packag., Vol. 132. 10.1115/1.4000719.
    CrossRef  |  Direct Link  |  
  45. Zulkefli, N.F., E.N.Tai, M.A. Mujeebu, M.Z. Abdullah and K.A. Ahmad, 2009. Numerical and experimental investigations of passive flow control devices on a backward facing step. Int. J. Eng. Technol., 6: 21-29.
  46. Yusoff, S., M. Mohamed, K.A. Ahmad, M.Z. Abdullah and M.A. Mujeebu et al., 2009. 3-D conjugate heat transfer analysis of PLCC packages mounted in-line on a printed circuit board. Int. Commun. Heat Mass Transfer, 36: 813-819.
    CrossRef  |  Direct Link  |  
  47. Saeed, M.O., M.N. Hassan and M.A. Mujeebu, 2009. Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur, Malaysia. Waste Manage., 29: 2209-2213.
    CrossRef  |  Direct Link  |  
  48. Ramesh, C.S., R.N. Ahmed, M.A. Mujeebu and M.Z. Abdullah, 2009. Fabrication and study on tribological characteristics of cast copper-TiO2-boric acid hybrid composites. Mater. Des., 30: 1632-1637.
    CrossRef  |  Direct Link  |  
  49. Ramesh, C.S., R.N. Ahmed, M.A. Mujeebu and M.Z. Abdullah, 2009. Development and performance analysis of novel cast copper-SiC-Gr hybrid composites. Mater. Des., 30: 1957-1965.
    CrossRef  |  Direct Link  |  
  50. Mujeebu, M.A., S. Jayaraj, S. Ashok, M.Z. Abdullah and M. Khalil, 2009. Feasibility study of cogeneration in a plywood industry with power export to grid. Appl. Energy, 86: 657-662.
    CrossRef  |  Direct Link  |  
  51. Mujeebu, M.A., M.Z. Abdullah, M.Z. Abu-Bakar, A.A. Mohamad and M.K. Abdullah, 2009. Applications of porous media combustion technology-A review. Applied Energy, 86: 1365-1375.
    CrossRef  |  
  52. Mujeebu, M.A., M.Z. Abdullah, M.A. Bakar, A.A. Mohamad, R.M.N. Muhad and M.K. Abdullah, 2009. Corrigendum to Combustion in porous media and its applications: A comprehensive survey. [Journal of Environmental Management 90 (2009) 2287-2312]. J. Environ. Manage., 2: 550-550.
    CrossRef  |  Direct Link  |  
  53. Mujeebu, M.A., M.Z. Abdullah, M.A. Bakar, A.A. Mohamad and M.K. Abdullah, 2009. A review of investigations on liquid fuel combustion in porous inert media. Prog. Energy Combust. Sci., 35: 216-230.
    CrossRef  |  Direct Link  |  
  54. Mujeebu, M.A., M. Z. Abdullah, M.A. Bakar, A.A. Mohamad, R.M.N. Muhad and M.K. Abdullah, 2009. Combustion in porous media and its applications: A comprehensive survey. J. Environ. Manage., 90: 2287-2312.
    CrossRef  |  Direct Link  |  
  55. Mujeebu, M.A., Abdullah and Ashok, 2009. Viability of biomass fueled steam turbine cogeneration with power export for an Asian plywood industry. Energy Explor. Exploit., 27: 213-224.
    CrossRef  |  Direct Link  |  
  56. Al-Mofleh, A., S. Taib, M.A. Mujeebu and W. Salah, 2009. Analysis of sectoral energy conservation in Malaysia. Energy- Int. J., 34: 733-739.
    CrossRef  |  
  57. Ajeel, S.A., A.M. Saleem, F.B. Bahaideen, M.A. Mujeebu and H.J.M. Alalkawi, 2009. Cold extrusion of carbon electrodes using dies of CRHS concept and performance analysis. Mod. Appl. Sci., 3: 44-54.
    CrossRef  |  Direct Link  |  
  58. Abdullah, M.K., M.Z. Abdullah, M.V. Ramana, C.Y. Khor and K.A. Ahmad et al., 2009. Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling. Int. Commun. in Heat Mass Transfer, 36: 51-58.
    CrossRef  |  Direct Link  |  
  59. Abdullah, M.K., M.Z. Abdullah, M.A. Mujeebu, S. Kamaruddin and Z.M. Ariff, 2009. A study on the effect of epoxy molding compound (EMC) rheology during encapsulation of stacked-chip scale packages (S-CSP). J. Reinf. Plast. Compos., 28: 2527-2538.
    CrossRef  |  Direct Link  |  
  60. Mohamed, M., R. Deraman, M.Z. Abdullah, M. Abdul Mujeebu and M.K. Abdullah, 2008. Three-dimensional CFD simulation for 8 PLCC packages mounted in line on a printed circuit board. Esteem, 4: 79-99.
  61. Ismail, M.A., M.Z. Abdullah and M.A. Mujeebu, 2008. A CFD-based experimental analysis on the effect of free stream cooling on the performance of micro processor heat sinks. Int. Commun. Heat Mass Transfer, 35: 771-778.
    CrossRef  |  Direct Link  |  
  62. Abdullah, M.K., M.Z. Abdullah, M.A. Mujeebu, S. Kamaruddin and Z.M. Ariff, 2008. Study on the effect of stack thickness during encapsulation of stacked-chip scale packages S-CSPs. J. Microelectron. Electron. Packag., 5: 62-67.
  63. Mohamed, M., M.Z. Abdullah, M.A. Mujeebu and M.K. Abdullah, 2007. Numerical investigation of heat transfer in plastic leaded chip carrier (PLCC) packages in in-line arrangement. J. Model. Des. Manage. Eng. Syst., 5: 11-22.
    CrossRef  |  Direct Link  |