Dr. Khaleed Hussain M. Tandur
My Social Links

Dr. Khaleed Hussain M. Tandur

Research Scientist
Islamic University, Saudi Arabia

Highest Degree
Ph.D. in Manufacturing from Universiti Sains Malaysia, Malaysia

Share this Profile

Biography

Dr. Khaleed Hussain. M.Tandur is currently working as Assistant Professor at Islamic University, Madinah, Kingdom of Saudi Arabia. He has completed his Ph.D. in Manufacturing from Universiti Sains Malaysia, Malaysia. His main area of interest related to Physical Science Engineering. His area of expertise includes Design Analysis, Finite Element Method, Manufacturing, AUV Propeller, Fracture Mechanics, Experimental Stress Analysis, and Vibrations. He is author and co-author of 24 journal papers.

Area of Interest:

Physical Science Engineering
100%
Analysis
62%
Finite Element Method
90%
Manufacturing
75%
Fracture Mechanics
55%

Research Publications in Numbers

Books
0
Chapters
0
Articles
55
Abstracts
37

Selected Publications

  1. Quadir, G.A., N.J.S. Ahmed, A.A.A.A. Al-Rashed, I.A. Badruddin, H.M.T. Khaleed and S. Kamangar, 2015. Finite element analysis of heater length in a porous annulus-part A. Applied Mech. Mater., 786: 193-198.
  2. Khan, T.M.Y., I.A. Badruddin, A. Badarudin, N.R. Banapurmath and N.J.S. Ahmed et al., 2015. Effects of engine variables and heat transfer on the performance of biodiesel fueled IC engines. Renew. Sustain. Energy Rev., 44: 682-691.
    CrossRef  |  Direct Link  |  
  3. Khaleed, H.M.T. G.A. Quadir, M.F. Addas, A.A.A.A. Al-Rashed and N.J.S. Ahmed et al., 2015. Thermal analysis of cup-shaped object and experiment for flash-less cold forging using FEM. Applied Mech. Mater., 786: 243-247.
  4. Badruddin, I.A., S. Kamangar, A.A.A.A. Al-Rashed, G.A. Quadir and N.A. Ahmad et al., 2015. Influence of radiation on double diffusive flow in a porous medium embedded with vertical plate. Int. J. Adv. Thermofluid Res., 1: 28-49.
    Direct Link  |  
  5. Al-Rashed, A.A.A.A., S.N.J. Ahmed, G.A. Quadir, H.M.T. Khaleed, I.A. Badruddin, Y.T.M. Khan and S. Kamangar, 2015. Finite element analysis of heater length in a porous annulus-part B. Applied Mech. Mater., 786: 199-204.
  6. Salman, A.N.J., S. Kamangar, I.A. Badruddin, A.A.A.A. Al-Rashed, G.A. Quadir, H.M.T. Khaleed and T.M.Y. Khan, 2014. Conjugate heat transfer in porous annulus. J. Porous Media, 17: 1109-1119.
    CrossRef  |  Direct Link  |  
  7. Khaleed, H.M.T., M.F. Addas, M.A. Mujeebu, A.A. Al-Rashed and I.A. Badruddin et al., 2014. Flash-less cold forging of cup-shaped object and stress analysis of forging die using FEM simulation and experiment. Aust. J. Basic Applied Sci., 8: 401-410.
    Direct Link  |  
  8. Badruddin, I.A., N.J.S. Ahmed, A.A. Al-Rashed, G.A. Quadir, H.M.T. Khaleed, S. Kamangar and T.M.Y. Khan, 2014. Effect of discrete heater placed at bottom section of a porous annulus. Aust. J. Basic Applied Sci., 8: 191-199.
    Direct Link  |  
  9. Badruddin, I.A., A.A. Al-Rashed, N.J.S. Ahmed, H.M.T. Khaleed, N.A. Ahmad, S. Kamangar and T.M.Y. Khan, 2014. Investigation of discrete heating at upper section of a porous annulus. Aust. J. Basic Applied Sci., 8: 283-289.
    Direct Link  |  
  10. Khaleed, H.M.T., Z. Samad, M.A. Mujeebu and A.B. Abdullah, 2013. Flash-less cold forging of AUV propeller blade: Work-piece optimization and thermal analysis. Arabian J. Sci. Eng., 38: 2509-2519.
    CrossRef  |  Direct Link  |  
  11. Abdullah, A.B., Z. Samad, H.M.T. Khaleed and M. Husaini, 2013. Modular tooling concept in the fabrication of the precision AUV blade. Applied Mech. Mater., 372: 369-372.
    CrossRef  |  Direct Link  |  
  12. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2013. Twist springback measurement of autonomous underwater vehicle propeller blade based on profile deviation. Am. J. Applied Sci., 10: 515-524.
    CrossRef  |  Direct Link  |  
  13. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2013. Numerical investigation of geometrical defect in cold forging of an AUV blade pin head. J. Manuf. Process., 15: 141-150.
    CrossRef  |  Direct Link  |  
  14. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2013. Geometrical defect evaluation of cold embossing AA6061 based on FEA and physical modeling technique. Applied Mech. Mater., 315: 141-145.
    CrossRef  |  Direct Link  |  
  15. Abdullah, A.B., S.M. Sapuan, Z. Samad and N.A. Aziz, 2013. Quality evaluation of cold embossed hole based on profile measurement technique. Adv. Mater. Res., 626: 564-568.
    CrossRef  |  Direct Link  |  
  16. Samad, Z., A.B. Abdullah, H.M.T. Khaleed, M.H. Abu-Bakar and M.R. Arshad, 2012. A novel manufacturing method of propeller for Autonoumous Underwater Vehicle (AUV) using cold forging process. Indian J. Geo-Mar. Sci., 41: 242-248.
    Direct Link  |  
  17. Khaleed, H.M.T., Z. Samad, M.A. Mujeebu, A. Badaruddin, I.A. Badruddin, A.B. Abdullah and N.J.S. Ahmed, 2012. FEM simulation and experimental validation of flash-less cold forging for producing AUV propeller blade. Iran. J. Sci. Technol., 36: 1-12.
    Direct Link  |  
  18. Badruddin, I.A., N.J.S. Ahmed, A.A.A.A. Al-Rashed, J. Kanesan, S. Kamangar and M.T.K. Hussain, 2012. Analysis of heat and mass transfer in a vertical annular porous cylinder using fem. Transp. Porous Media, 91: 697-715.
    CrossRef  |  Direct Link  |  
  19. Abdullah, A.B., S.M. Sapuan, Z. Samad, M.T. Khaleed, M. Husaini and N.A. Aziz, 2012. Twist springback measurement of AUV propeller blade based on profile deviation. Adv. Mater. Res., 512-515: 1840-1844.
    CrossRef  |  Direct Link  |  
  20. Abdullah, A.B., S.M. Sapuan, Z. Samad, M.T. Khaleed and N.A. Aziz, 2012. Effect of die modification to geometrical defect of cold forged AUV propeller blade. Adv. Mater. Res., 576: 133-136.
    CrossRef  |  Direct Link  |  
  21. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2012. Prediction of geometric defects in the cold embossing of AA6061 aluminum alloy by finite element analysis. Sci. Res. Essays, 7: 1630-1638.
    Direct Link  |  
  22. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2012. Manufacturing of AA6061 propeller for AUV application using cold forging process. Sci. Res. Essays, 7: 170-176.
    Direct Link  |  
  23. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2012. An investigation of geometrical defect of cold embossing part utilizing FEM and image processing technique. Indian J. Eng. Mater. Sci., 19: 41-46.
    Direct Link  |  
  24. Abdullah, A.B., M.S. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2012. Effects of die shape modifications on the geometrical and dimensional accuracies of cold forged AUV propeller blade. Int. J. Phys. Sci., 7: 2745-2754.
    Direct Link  |  
  25. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu, A.B. Abdullah, N.J.S. Ahmed and M.M. Zihad, 2011. Flash-less cold forging and temperature distribution in forged autonomous underwater vehicle hubs using FEM analysis and experimental validation. Int. J. Mech. Mater. Eng., 6: 291-299.
    Direct Link  |  
  26. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu, A.B. Abdullah and M.M. Zihad, 2011. Work-piece optimization and thermal analysis for flash-less cold forging of AUV propeller hubs-FEM simulation and experiment. J. Manuf. Processes, 13: 41-49.
    CrossRef  |  
  27. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu and A. Badarudin et al., 2011. Computer-Aided FE simulation for flashless cold forging of connecting rod without underfilling. Arabian J. Sci. Eng., 36: 855-865.
    CrossRef  |  
  28. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2011. Quantitative evaluation of geometric and dimensional error of cold forged AUV propeller blade. Aust. J. Basic Applied Sci., 5: 1756-1764.
    Direct Link  |  
  29. Abdullah, A.B., S.M. Sapuan, Z. Samad, H.M.T. Khaleed and N.A. Aziz, 2011. Geometrical error analysis of cold forged AUV propeller blade using optical measurement method. Adv. Mater. Res., 383-390: 7117-7121.
    CrossRef  |  Direct Link  |  
  30. Abdullah, A.B., S.M. Sapuan, Z. Samad and H.M.T. Khaleed, 2011. Investigation of geometrical defect of AA6061-T4 cold embossing using FEM. Applied Mech. Mater., 110-116: 2337-2341.
  31. Abdullah, A.B., S.M. Sapuan, Z. Samad and H.M.T. Khaleed, 2011. Geometric and dimensional error assessment of forging parts: A survey of product and process design methods. Int. Rev. Mech. Eng., 5: 553-561.
    Direct Link  |  
  32. Khaleed, H.M.T., Z. Samad, A.R. Othman, M.A. Mujeebu and A.R. Arsyad et al., 2010. FEM and experimental analysis of flash-less cold forging of propeller hubs and blade of autonomous underwater vehicle. J. Eng. Manuf., 224: 1455-1467.
    CrossRef  |  
  33. Othman, S., M.A. Miskam, M.T.K. Hussain and M.F. Alias, 2009. Shukri korakkottil kunhi mohd optimal design of capacitive micro cantilever beam accelerometer. Mod. Applied Sci. .
    Direct Link  |  
  34. Mallick, Z., I.A. Badruddin, M.T.K. Hussain and A.N.J. Salman, 2009. Noise characteristics of grass trimming machine engine and its effect on operators. Noise Health Year, 11: 98-102.
    PubMed  |  Direct Link  |  
  35. Hussain, M.T.K., Z. Samad, A.R. Othman, S.C. Pilli and N.J.S. Ahmed et al., 2009. A study on cold forging die design using different techniques. Mod. Applied Sci., 3: 143-154.
  36. Bahaideen, F.B., A.M. Saleem, M.T.K. Hussain, Z.M. Ripin and Z.A. Ahmad et al., 2009. Fatigue behaviour of aluminum alloy at elevated temperature. Mod. Applied Sci., 3: 52-61.
    Direct Link  |  
  37. Ahmed, N.J.S., I.A. Badruddin, Z.A. Zainal and M.T.K. Hussain and J. Kanesan, 2009. Heat transfer in a conical cylinder with porous medium. Int. J. Heat Mass Transfer, 52: 3070-3078.
    CrossRef  |  Direct Link  |  
  38. Ab-Kadir, A.R., A.R. Othman, Z. Samad, M.T.K. Hussain and A.B. Abdullah, 2009. Effect of corner radius and friction parameters on the optimization of the cold forging die design. Mod. Applied Sci., 3: 177-189.
    Direct Link  |  
  39. Mohammed-Tandur, K.H. and I.A. Badruddin, 2008. Computing the stress concentration factor in bolted joint using FEM. Int. J. Applied Eng. Res., 3: 369-387.
    Direct Link  |  
  40. Hussain, M.T.K., Z. Samad, S. Suhaib, A.R. Uthman and S.A. Jagirdar et al., 2008. Analysis of stress concentration factor in bolted joint using finite element method. Int. J. Mech. Mater. Eng., 3: 38-45.
    Direct Link  |  
  41. Hussain, M.T.K., Z. Samad , S. Sahudin, A.R. Othman, A.B. Abdullah and A. R. Ab-Kadir, 2008. A review on cold forging die design and die design process. Int. J. Applied Eng. Res., 3: 409-430.
    Direct Link  |  
  42. Ahmed, N.S.J., Z.A. Zainal, I.A. Badruddin and M.T.K. Hussain, 2008. Heat transfer analysis of porous medium in a conical cylinder with variable wall temperature. Int. J. Mech. Mater. Eng., 3: 145-152.
    Direct Link  |  
  43. Zulquernain, M., I.A. Badruddin, A. Haleem, A.N. Siddique and M.T.K. Hussain, 2007. Ergonomic evaluation of data entry task performance under the influence of noise and task structure-the effect of gender. Int. J. Mech. Mater. Eng., 2: 161-172.
    Direct Link  |  
  44. Zulquernain, M., I.A. Badruddin and M.T.K. Hussain, 2007. Operational characteristics optimization of human-computer system. IIUM Eng. J., 2: 161-172.
    Direct Link  |